550G-AF5-R Price, дистрибьютор, Stock

Key Specifications. Antenna Type Stamped Metal Polarization Linear Minimum Frequency 5.15 GHz Maximum Frequency 5.825 GHz Impedance 50 Ohm Maximum Input VSWR 2:1. 5150- 5825 MHz, 5.1 dBi, Stamped Metal AP/Router Embedded Antenna With IPEX Connector-50 Pack., Linear polarized antenna PESMA1015-50PK from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The stamped metal antenna with an IPEX connector has a maximum frequency of 5825 MHz and a minimum frequency of 5150 MHz. This 50-pack stamped metal antenna has a maximum input VSWR of 2:1. This stamped metal antenna with an IPEX connector has an overall length of 1.18 inches and a width of 0.39 inches. Pasternack’s PESMA1015-50PK is a single band antenna operating from 5150 to 5825 MHz with a 5.1 dBi gain. Our high-quality 50-pack omni directional antenna has an impedance of 50 Ohms. Pasternack's experts are on hand to assist you with any inquiries. Order this PESMA1015-50PK 50-pack stamped metal antenna 7 days a week, 24 hours a day, using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping. Our knowledgeable sales team and ability in the global availability market allow us to lead the industry in supplying RF products like these omni directional antennas.

1 : $175.99
10 : $168.95
25 : $161.91
100 : $154.87

PE3C6225-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum Snap-On 4.3-10 Male to N Female Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to N female low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to N female low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-LP N type cable is a male to female coax assembly, PE3C6225-50CM, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6225-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6225-50CM can also be used in the other direction and will be TC-SPP250-NF-LP N type female to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to N female low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49

PE35506-96

Pasternack Enterprises

Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: C, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length, Max: 96 inches. HN Male to C Male Cable 96 Inch Length Using RG217 Coax., Radio frequency assembly HN male to C male cable 96 inch length using RG217 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to C male cable 96 inch length using RG217 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to C type cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and type C cable connection on the other. Our HN to type C cable assembly has male gender on end 1 and male on end 2. PE35506-96 can also be known as a HN plug to type C plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. HN plug to C type plug cable assembly PE35506-96 is built with RG217 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to type C cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE35506-96 RF cable are available on our downloadable PDF datasheet.PE35506-96 can also be used in the other direction and will be type C male to HN male cable assembly if the opposite connectivity is required. HN plug to C type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to C type cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements.

1 : $291.99
25 : $277.39
50 : $262.79
100 : $251.11

PE3MSA00550-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. Lead Free TRB Jack to TRB Jack 1553 Cable 24 Inch Length Using 78 Ohm PE-30-02001 Coax., Radio frequency assembly lead free TRB jack to TRB jack 1553 cable 24 inch length using 78 Ohm PE-30-02001 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free TRB jack to TRB jack 1553 cable 24 inch length using 78 Ohm PE-30-02001 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00550-24 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00550-24 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free TRB jack to TRB jack 1553 cable 24 inch length using 78 Ohm PE-30-02001 coax.

1 : $271.99
25 : $258.39
50 : $244.79
100 : $233.91

PE3C5501/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to TNC Male Right Angle Cable Using RG400 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to TNC male right angle cable using RG400 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female bulkhead to TNC male right angle cable using RG400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and right angle TNC cable connection on the other. Our BNC to right angle TNC cable assemblies have a female gender on end 1 and male on end 2. This BNC to TNC cable is a female to male coax assembly, PE3C5501/HS, can also be known as a BNC jack to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. BNC jack to TNC plug cable assembly PE3C5501/HS is built with RG400 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC female bulkhead to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5501/HS can also be used in the other direction and will be right angle TNC male to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female bulkhead to TNC male right angle cable using RG400 coax with heatshrink.

PE3W16550-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMB Jack Bulkhead to MCX Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly SMB jack bulkhead to MCX plug right angle low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to MCX plug right angle low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMB bulkhead cable connection on one end and a right angle MCX cable connection on the other. Our low loss SMB to right angle MCX cable assembly has a jack gender on end 1 and a plug on end 2. PE3W16550-100CM can also be known as a low loss SMB female to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16550-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead SMB jack to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMB female to MCX male cable assembly PE3W16550-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16550-100CM can also be used in the other direction and will be a right angle MCX plug to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to MCX cable assembly for quick shipment worldwide. Variations of SMB and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $77.09
25 : $73.24
50 : $69.38
100 : $66.3

PE3W21550/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Female Cable Using LMR-195-UF Coax with HeatShrink. PE3W21550/HS is a reverse polarity SMA male right angle to reverse polarity SMA female cable using LMR-195-UF coax. This Pasternack reverse polarity SMA male right angle to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21550/HS SMA reverse polarity male right angle to SMA reverse polarity female cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W05509/HS-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to TNC Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male right angle to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle SMA to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W05509/HS-100CM can also be known as a low loss right angle SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05509/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3W05509/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W05509/HS-100CM can also be used in the other direction and will be a TNC female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $99.59
25 : $94.61
50 : $89.63
100 : $85.65

PE3W15506LF/HS

Pasternack Enterprises

PE3W18550

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using PE-SR405FLJ Coax. PE3W18550 is a N male right angle to N male right angle cable using PE-SR405FLJ coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18550 N male right angle to N male right angle cable assembly is constructed with PE-SR405FLJ coax.

PE6065-50

Pasternack Enterprises

Key Specifications, Termination Type: RF Load, Connector Series: N, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 1 GHz, Impedance: 50 Ohm, Maximum Power: 0.5 Watt. 0.5 Watt RF Load with Chain Up to 1,000 MHz with N Female Nickel Plated Brass. PE6065-50 0.5 Watts RF load (also known as termination or dummy load) has a type N connector that is female. This Pasternack 0.5 watt N type female load / termination is rated for a maximum frequency of 1 GHz. Our type N female termination load is a rf load termination with a 50 Ohm impedance. This type N load / coax terminator is manufactured with chain. PE6065-50 0.5 watt N type female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our type N female 0.5 watt termination load will ship worldwide the same day as purchased.

1 : $44.79
25 : $42.55
50 : $40.31
100 : $38.52

PE3C1550

Pasternack Enterprises

PE3C3550/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50. 7/16 DIN Male to 7/16 DIN Female Cable Using LMR-600 Coax with HeatShrink. PE3C3550/HS is a 7/16 DIN male to 7/16 DIN female cable using LMR-600 coax. This Pasternack 7/16 DIN male to 7/16 DIN female cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to female 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3550/HS 7/16 DIN male to 7/16 DIN female cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C7615-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. N Male to N Male Low Loss Cable 50 CM Length Using LMR-600-UF Coax Using Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 50 cm length using LMR-600-UF coax using Times Microwave components with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male low loss cable 50 cm length using LMR-600-UF coax using Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3C7615-50CM, can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C7615-50CM is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 50 cm length using LMR-600-UF coax using Times Microwave components with heatshrink.

1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93

PE3C7855-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. NEX10 Male Right Angle to NEX10 Female Bulkhead Low PIM Cable 50 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male right angle to NEX10 female bulkhead low PIM cable 50 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NEX10 male right angle to NEX10 female bulkhead low PIM cable 50 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NEX10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle NEX10 cable connection on one end and NEX10 bulkhead cable connection on the other. Our low PIM right angle NEX10 to NEX10 cable assemblies have a male gender on end 1 and female on end 2. This NEX10 to NEX10 cable is a male to female coax assembly, PE3C7855-50CM, can also be known as a low PIM right angle NEX10 plug to NEX10 jack cable assembly and will be shipped same-day as it is purchased. NEX10 plug to NEX10 jack cable assembly PE3C7855-50CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM NEX10 right angle male to NEX10 female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7855-50CM can also be used in the other direction and will be NEX10 female bulkhead to right angle NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 right angle plug to NEX10 jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NEX10 male right angle to NEX10 female bulkhead low PIM cable 50 cm length using 1/4 inch superflexible coax.

1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93

Teledyne HiRel

M38510/75503BZA

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS
RoHS : Not Compliant

5962-9055502LA

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 25 NS
RoHS : Not Compliant

5962-8975502LA

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT AND-OR
RoHS : Not Compliant

5962-9055501KA

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 35 NS
RoHS : Not Compliant

5962-90555023A

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 25 NS
RoHS : Not Compliant

5962-9215501MXA

Teledyne HiRel

PROM, 32K X 8, REGISTERED, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-87555012A

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8855501EA

Teledyne HiRel

5962-8755001ZA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/75503BSA

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS
RoHS : Not Compliant

5962-9055503LA

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 20 NS
RoHS : Not Compliant

5962-8755001RA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-88555012A

Teledyne HiRel

5962-9165501MXA

Teledyne HiRel

MULTIPLEXER, DUAL 8-INPUT
RoHS : Not Compliant

5962-8855501FA

Teledyne HiRel

Venkel Ltd.

MELFC0102-RE-2550BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;255R;�0.1%
RoHS : Compliant

MELFC0102-UZ-2550FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�15PPM;255R;�1%
RoHS : Compliant

MELFC0204-TC-2550CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;255R;�0.25%
RoHS : Compliant

UPTF0805-10W-P-2550UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;255R;�0.01%
RoHS : Compliant

UPTF2512-2W-N-2550DT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�10PPM;255R;�0.5%
RoHS : Compliant

PWCR0603-TL-2550DT

VENKEL LTD

Pulse Withstanding CR;0603;1/4W;�200PPM;255R;�0.5%
RoHS : Compliant

PWCR1210-VK-2550FT

VENKEL LTD

Pulse Withstanding CR;1210;1/2W;�100PPM;255R;�1%
RoHS : Compliant

HPTF0603-QP-2550AT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;255R;�0.05%
RoHS : Compliant

HPTF1206-TC-2550AT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�50PPM;255R;�0.05%
RoHS : Compliant

HPTF1210-UP-2550FT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�5PPM;255R;�1%
RoHS : Compliant

PWCR0603-TK-2550DT

VENKEL LTD

Pulse Withstanding CR;0603;1/4W;�100PPM;255R;�0.5%
RoHS : Compliant

MELFC0207-VE-2550CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;255R;�0.25%
RoHS : Compliant

MELFC0207-VZ-2550DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�15PPM;255R;�0.5%
RoHS : Compliant

UPTF1206-8W-P-2550UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;5PPM;255R;�0.01%
RoHS : Compliant

TFCR0402-16W-K-2550FT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�100PPM;255R;�1%
RoHS : Compliant

Vyrian

V550LC80CPX10

Littelfuse Inc

Varistor, 970V, Through Hole Mount
RoHS : Compliant

11,237

2-1571550-8

TE Connectivity

IC Socket, DIP24, 24 Contact(s), 2.54mm Term Pitch, 15.24mm Row Spacing, Solder
RoHS : Compliant

11,024

1955015

Phoenix Contact

Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

9,190

V62/04755-07XE

Texas Instruments

Operational Amplifier, 1 Func, 600uV Offset-Max, BIPolar, PDSO8
RoHS : Compliant

9,008

SC16C550IN40,112

NXP Semiconductors

Serial I/O Controller, 1 Channel(s), 0.375MBps, CMOS, PDIP40

8,940

BZX58550-C10-QX

Nexperia

RoHS : Compliant

8,482

5962-01-375-5501

Texas Instruments

Operational Amplifier, 2 Func, 20000uV Offset-Max, PDIP14
RoHS : Not Compliant

7,838

5962-8550701V2A

Texas Instruments

Bus Driver, 8-Func, CMOS, CQCC20
RoHS : Not Compliant

7,759

55/0112-16-2

TE Connectivity

Wire And Cable, 16AWG, 600V, Flexible Cord And Fixture Wire
RoHS : Compliant

7,170

BZX58550-C30-Q

Nexperia

Zener Diode, 30V V(Z), 5%, 0.3W, Silicon, Unidirectional
RoHS : Compliant

6,861

5962-8515509SA

Texas Instruments

OT PLD, 15ns, PAL-Type, TTL, CDFP20
RoHS : Not Compliant

6,617

5962-85155022A

Texas Instruments

OT PLD, 15ns, PAL-Type, TTL, CQCC20
RoHS : Not Compliant

5,175

1955060

Phoenix Contact

Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

5,170

5962-85155092X

Texas Instruments

OT PLD, 15ns, TTL, CQCC20

5,157

BZX58550-C47-QX

Nexperia

RoHS : Compliant

2,463

Waytek, Inc.

216550

Casco Automotive Group

Power Source Cap for Housing

10 : $1.1662
50 : $1.0401
100 : $0.9455
200 : $0.914
500 : $0.8825
1,000 : $0.8457

14,576

5550125RD00R5

ShawCor Ltd

DSG-Canusa 5550125RD00R5 CPA-300 heat shrink tubing is red adhesive-lined tubing with a .125" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

1,000 : $1.0169
5,000 : $0.9574

3,000

55014

Cole Hersee

Cole Hersee 55014 standard heavy-duty metal toggle switch is an SPST On-Off switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features two 0.250" blade terminals, silver contacts, and a standard 11/16" handle.

1 : $9.44
10 : $9.05
20 : $8.71
50 : $8.23
100 : $7.9
200 : $7.61

2,826

5550750BK00R2

ShawCor Ltd

DSG-Canusa 5550750BK00R2 CPA-300 heat shrink tubing is black adhesive-lined tubing with a .750" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

100 : $2.9853
500 : $2.7332

700

T150XL0X2 111-15500

HellermannTyton

HellermannTyton T150XL0X2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 43" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications.

25 : $2.0388
50 : $1.8211
100 : $1.6496
200 : $1.5968
500 : $1.5374
1,000 : $1.478

475

55021-07

Cole Hersee

Cole Hersee 55021-07 PVC-coated heavy-duty metal toggle switch is an SPDT (On)-Off-(On) momentary switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features three 8" wire leads, an O-ring-sealed stem, and PVC-coated housing.

1 : $25.97
10 : $20.16
50 : $18.55
100 : $17.84
200 : $17.34
500 : $16.83

300

55019

Cole Hersee

Cole Hersee 55019 standard heavy-duty metal toggle switch is a DPDT On-Off-On switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features six 0.250" blade terminals, silver contacts, and a standard 11/16" handle.

1 : $15.17
10 : $13.77
50 : $12.83
100 : $12.42
200 : $12.13
500 : $11.84

280

55054

Cole Hersee

Cole Hersee 55054 standard heavy-duty metal toggle switch is a DPDT (On)-Off-(On) momentary switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features six screw terminals, silver contacts, and a standard 11/16" handle.

1 : $28.05
5 : $27.14
10 : $26.33
50 : $25.21
100 : $24.44
200 : $23.72

261

55025

Cole Hersee

Cole Hersee 55025 sealed waterproof toggle switch is an SPST On-Off switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It is sealed to IP68 with O-ring and epoxy sealing, and includes wire leads for protected vehicle mounting.

1 : $23.93
10 : $23.03
50 : $22.26
100 : $21.14
200 : $20.38
500 : $19.67

126

55017

Cole Hersee

Cole Hersee 55017 standard heavy-duty metal toggle switch is a DPST On-Off switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features four 0.250" blade terminals, silver contacts, and a 15/32"-32 threaded mounting stem.

1 : $27.36
10 : $26.29
50 : $25.53
100 : $24.15
200 : $23.39
500 : $22.47

55088

Cole Hersee

Cole Hersee 55088 standard heavy-duty metal toggle switch is an SPDT On-Off-(On) switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features three screw terminals, silver contacts, and a standard 11/16" handle.

1 : $15.43
10 : $13.77
50 : $12.67
100 : $12.19
200 : $11.85
500 : $11.51

4255-001

QuickCable Corporation

Crimp Tool 8 GA TO 250 MCM BATTERY LUGS HEX CRIMP

1 : $317.4
10 : $298.34

55036

Cole Hersee

Cole Hersee 55036 sealed toggle switch is an SPDT On-Off-On specialty toggle rated 20A at 12VDC. It features (3) 16 gauge wire leads, a black weather-resistant plastisol coating, nickel-plated hardware, and a 0F to 150F temperature rating.

1 : $19.2
5 : $18.48
10 : $17.88
50 : $16.92
100 : $16.31
200 : $15.84

55054-04

Cole Hersee

Cole Hersee 55054-04 long-handle heavy-duty metal toggle switch is a DPDT (On)-Off-(On) momentary switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features six screw terminals, silver contacts, and a 1-1/2" long handle.

1 : $34.09
5 : $32.82
10 : $31.75
50 : $30.05
100 : $28.98
200 : $28.13

5550500RD00R3

ShawCor Ltd

DSG-Canusa 5550500RD00R3 CPA-300 heat shrink tubing is red adhesive-lined tubing with a .500" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

200 : $1.9623
1,000 : $1.7965

Wuhan P&S

MKP1848550704K2L20

Vishay Intertechnologies

Metallized Polypropylene DC-Link Film Capacitor Automotive Grade

1 : $5.38
100 : $1.8
500 : $1.66
1,000 : $1.62

8,000

550G-AF5-R дистрибьютор

ссылки URL