510G-AF5-R Price, дистрибьютор, Stock

Key Specifications. Polarity Standard Connector Series NMO Mount Connector Gender Sexless Impedance 50 Ohm Body Style Straight Attachment Method Crimp/Solder Mount Method None Interface Type 1 PE-C195 Interface Type 2 PE-P195 Interface Type 3 RG58 Interface Type 4 RG141 Interface Type 5 RG142 Interface Type 6 RG400 Interface Type 7 RG303 Interface Type 8 LMR-195. NMO Mount Connector Crimp/Solder Attachment for PE-C195, PE-P195, RG58, RG141, RG142, RG400, RG303, LMR-195. PE51021 NMO Mount coaxialconnector has an interface type of NMO Mount which is compatible with PE-C195, PE-P195, RG58, RG141, RG142, RG400, RG303 and LMR-195 cables and has an impedance of 50 Ohms. Pasternack’s NMO Mount connector uses crimp/solder as an attachment method. This NMO Mount RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online cable creator. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. , This Pasternack NMO Mount connector will ship the same business day as purchased. Our NMO Mount connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $28.49
25 : $27.07
50 : $25.64
100 : $24.5

4,033

PE3C10295-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to Straight Cut Lead Low Loss Cable 100 CM Length Using LMR-100A-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to straight cut lead low loss cable 100 cm length using LMR-100A-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to straight cut lead low loss cable 100 cm length using LMR-100A-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss SMA to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3C10295-100CM can also be known as a low loss SMA plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10295-100CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to straight cut lead sexless cable assembly PE3C10295-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10295-100CM can also be used in the other direction and will be a straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $34.29
25 : $32.58
50 : $30.86
100 : $29.49

847

PE35109-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to BNC Male Cable 24 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA male to BNC male cable 24 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to BNC male cable 24 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE35109-24, can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE35109-24 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35109-24 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 24 inch length using PE-SR405FL coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

607

PE3C3510LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Male Cable 12 Inch Length Using RG188-DS Coax, LF Solder., Radio frequency assembly SMA male to BNC male cable 12 inch length using RG188-DS coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC male cable 12 inch length using RG188-DS coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3510LF-12 can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C3510LF-12 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3510LF-12 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 12 inch length using RG188-DS coax, LF solder.

1 : $54.59
25 : $51.86
50 : $49.13
100 : $46.95

591

PE3FCA245-10M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Yellow-10M. Pasternack’s PE3FCA245-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 4-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA245-10M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $156.99
5 : $150.71
10 : $144.43
25 : $138.15

130

PE3C6175-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.3-10 Male to 4.3-10 Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 4.3-10 male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 4.3-10 male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-250-4310M-LP 4.3-10 cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable is a male to male coax assembly, PE3C6175-100CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-LP 4.3-10 plug cable assembly PE3C6175-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-250-4310M-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 4.3-10 male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3FCA535-10M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: ST, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 0 deg C, Min Operating Temperature: 60 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex ST UPC to ST UPC, MM OM4, 2.0mm Plenum, Aqua-10M. Pasternack’s PE3FCA535-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex cable assembly is equipped with ST/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 60 to 0 degrees C, this cable provides reliable performance across diverse conditions. As an OM4 fiber optic jumper, Pasternack’s PE3FCA535-10M is designed for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber.The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA535-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA535-10M fiber optic cable with a 2 mm cable diameter and 30 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual ST/UPC to dual ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.

1 : $36.49
5 : $35.03
10 : $33.57
25 : $32.11

PE3C9510

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG400 Coax., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG400 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9510 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9510 is built with RG400 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG400 coax.

PE3C9510-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 36 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable 36 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable 36 inch length using RG400 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9510-36 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9510-36 is built with RG400 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable 36 inch length using RG400 coax.

1 : $205.99
25 : $195.69
50 : $185.39
100 : $177.15

PE51058

Pasternack Enterprises

Key Specifications, Antenna Type: Dome, Polarization: Linear, Minimum Frequency: 800 MHz, Maximum Frequency: 3 GHz, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 6 dB, Maximum Input VSWR: 2:1. Dome Low PIM Multi Band Antenna Operates From 800 MHz to 3 GHz With a Typical 7.5 dBi Gain N Female Input Connector Rated. Dome antenna PE51058 from Pasternack is featured in our extensive in-stock radio frequency directional antenna selection. This low pim multi band ceiling dome antenna uses has a frequency range of and a 6 nominal dBi gain. Our ceiling mount dome antenna uses N female connector and is rated for 100 Watts input. Our radio frequency dome ceiling antenna. PE51058 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This dome RF antenna can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $577.99
10 : $554.87
25 : $531.75

PE3W05101LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Cable Using LMR-100A-UF Coax with HeatShrink., Pasternack’s PE3W05101LF/BK/HS right angle TNC male to TNC female RF cable assembly using LMR-100A-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W05101LF/BK/HS can also be known as a right angle TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05101LF/BK/HS RF cable has a tpe jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. This PE3W05101LF/BK/HS TNC plug to TNC jack cable assembly is built with LMR-100A-UF, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05101LF/BK/HS can also be used in the other direction and will be a TNC female to right angle TNC male cable assembly if the opposite connectivity is required. This TNC right angle plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3W05106/TN/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male Right Angle to TNC Male Cable Using RG400 Coax with HeatShrink., Pasternack’s PE3W05106/TN/HS right angle type N male to TNC male RF cable assembly using RG400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle type N cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W05106/TN/HS can also be known as a right angle type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05106/TN/HS RF cable has an FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our right angle type N male to TNC male cable has a maximum VSWR of 1.4:1. This PE3W05106/TN/HS type N plug to TNC plug cable assembly is built with RG400, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05106/TN/HS can also be used in the other direction and will be a TNC male to right angle type N male cable assembly if the opposite connectivity is required. This type N right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC RF cable assembly as per your requirements.

PE3W16510

Pasternack Enterprises

PE3510-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Right Angle Cable 36 Inch Length Using RG188 Coax., Radio frequency assembly SMA male to SMA male right angle cable 36 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 36 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3510-36, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3510-36 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3510-36 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 36 inch length using RG188 coax.

1 : $73.89
25 : $70.2
50 : $66.5
100 : $63.55

PE3M0245-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Temperature Conditioned TNC Male Right Angle to N Female Bulkhead Low Loss Cable 100 cm Length Using PE-P300LL Coax., Pasternack temperature conditioned TNC male right angle to N female bulkhead low loss cable 100 cm length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0245-100CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability TNC to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with right angle TNC connection on one end and N type connection on the other. Our low loss right angle TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly. PE3M0245-100CM can also be known as a temperature conditioned low loss right angle TNC plug to N type jack cable assembly and will be shipped the same day after it is purchased. TNC plug to type N jack cable assembly PE3M0245-100CM is built with PE-P300LL which is a flexible coax. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency TNC right angle male to N type female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0245-100CM can be used in the other direction and will be type N female to right angle TNC male cable assembly. Pasternack high reliability low loss TNC right angle plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for same-day shipment worldwide. Variations of PE45526 TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned TNC male right angle to N female bulkhead low loss cable 100 cm length using PE-P300LL coax.

1 : $1,170.0
25 : $1,111.5
50 : $1,053.0
100 : $1,006.2

Teledyne HiRel

M38510/35101BFA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/15102BDA

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

M38510/75101BCA

Teledyne HiRel

NOR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/15102BAA

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

M38510/75101BDA

Teledyne HiRel

NOR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/15102BBA

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

M38510/15102BCA

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

M38510/75101B2A

Teledyne HiRel

NOR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/35101B2A

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/35101BEA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/00101BCA

Teledyne HiRel

NAND GATE, 8-INPUT
RoHS : Not Compliant

M38510/11001BDA

Teledyne HiRel

OP AMP, QUAD
RoHS : Not Compliant

M38510/30107BFA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 4-BIT
RoHS : Not Compliant

M38510/31602BEA

Teledyne HiRel

LATCH, RS, 4-BIT
RoHS : Not Compliant

M38510/34002B2A

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

Venkel Ltd.

CR0805-10W-5101FT

VENKEL LTD

Chip Resistor;0805;1/10W;5.1K;�1%
RoHS : Compliant

5,000

TFCR0805-10W-C-5102DT

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;51K ;�0.5%
RoHS : Compliant

TFCR0805-10W-C-5103FT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;510K;�1%
RoHS : Compliant

TFCR0805-10W-E-5100DT

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;510R;�0.5%
RoHS : Compliant

TFCR0805-10W-K-5101CT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;5.1K;�0.25%
RoHS : Compliant

TFCR0805-10W-K-5102CT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;51K ;�0.25%
RoHS : Compliant

TFCR0805-10W-C-5103FT

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;510K;�1%
RoHS : Compliant

TFCR0805-10W-E-5101FT

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;5.1K;�1%
RoHS : Compliant

TFCR0805-10W-K-5101DT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;5.1K;�0.5%
RoHS : Compliant

TFCR0805-10W-C-5102BT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;51K ;�0.1%
RoHS : Compliant

TFCR0805-10W-E-5103CT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;510K;�0.25%
RoHS : Compliant

TFCR0805-10W-K-5103FT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;510K;�1%
RoHS : Compliant

TFCR0805-10W-E-5100BT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;510R;�0.1%
RoHS : Compliant

TFCR0805-10W-E-5102CT

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;51K ;�0.25%
RoHS : Compliant

TFCR0805-10W-K-5103BT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;510K;�0.1%
RoHS : Compliant

Waytek, Inc.

216510

Casco Automotive Group

Power Source 12V Outlet Housing 30 AMP CONNECTOR 38003 & 56 TERMINAL

1 : $5.1474
50 : $4.3206
100 : $4.039
200 : $3.8136
500 : $3.6255

17,457

151-00786

HellermannTyton

HellermannTyton 151-00786 round fir tree push mount is a wire-management fastener designed to anchor bundles to a panel with a push-in fir tree stem. Its round mount format supports quick installation, organized harness routing, and stable bundle retention in vehicle and equipment applications.
RoHS : Compliant

1 : $0.3101
50 : $0.2781
100 : $0.2627
200 : $0.2531
500 : $0.2322
1,000 : $0.2253

5,541

155100-1

Littelfuse Inc

Fuse Body

25 : $0.6786
50 : $0.6543
100 : $0.6301
200 : $0.599
500 : $0.5781
1,000 : $0.5574

3,708

7116-4151-02

Yazaki Corp

18-16 GA Yazaki 2.8 Female Terminal Reel

3,000 : $0.2618
15,000 : $0.2278

3,000

7116-4151-02

Yazaki Corp

18-16 GA Yazaki 2.8 Female Terminal Loose

15 : $0.6595
50 : $0.5947
100 : $0.5242
200 : $0.4898
500 : $0.4574
1,000 : $0.4269

1,361

7282557510

Yazaki Corp

Yazaki 2.8 - 2 Male Connector

1 : $1.1767
50 : $1.1276
100 : $1.0926
200 : $1.0365
500 : $1.0016
1,000 : $0.9666

1,294

ELF5-10

NSPA

Solder Splice Connector 12-10 GA. Yellow

10 : $1.208
50 : $1.0756
100 : $0.9764
200 : $0.9432
500 : $0.9142
1,000 : $0.8771

1,162

ETI5-10

NSPA

TI ElektraLink 12-10 AWG Butt Connector

5 : $1.2442
50 : $1.1079
100 : $1.0056
200 : $0.9715
500 : $0.9417
1,000 : $0.9033

787

KS5-10-CLN

NSPA

Krimpa-Seal Butt - 12-10 AWG Nylon Butt w/HST

10 : $0.8113
50 : $0.7224
100 : $0.6557
200 : $0.6334
500 : $0.6141
1,000 : $0.589

400

391002510

Molex

Eurostyle Two Screw Barrier Strips, 14-6 GA, 15mm Pitch 600V, 10 Pole, 63 Amps
RoHS : Compliant

1 : $8.46
10 : $8.14
50 : $7.16
100 : $6.81
200 : $6.13
500 : $5.92

394

25510-B-2

Eaton Electronics

10 AMP Manual Reset Mid Range Panel Mount Circuit Breaker PUSH TO TRIP

1 : $29.9
5 : $26.75
10 : $24.98
50 : $23.62
100 : $22.39
200 : $21.43

126

151060

OptiFuse

Surface Mount Circuit Breaker Automatic, 42VDC, 60A

1 : $34.85
10 : $31.43
50 : $28.86
100 : $27.84
200 : $26.99
500 : $26.31

100

4510-557F

QuickCable Corporation

1/0 GA Flag Battery Lug 3/8" Stud Locking Terminal Tinned Anti-Rotation Teeth

1 : $23.05
10 : $20.77
50 : $19.07
100 : $17.37
200 : $16.1
500 : $14.92

5551000RD0048

ShawCor Ltd

DSG-Canusa 5551000RD0048 CPA-300 heat shrink tubing is red adhesive-lined tubing with a 1.000" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

1 : $20.98
10 : $18.06
50 : $16.43
100 : $15.01
500 : $14.15

151-01501

HellermannTyton

HellermannTyton 151-01501 adjustable ratchet clamp is a reusable bundle-mounting clamp designed to secure wire, cable, hose, or tubing with controlled tension. Its adjustable ratchet design supports serviceability, cleaner routing, and stable retention in vehicle and equipment applications.
RoHS : Compliant

1 : $5.8997
50 : $5.2572
100 : $4.7704
200 : $4.6146
500 : $4.4589
1,000 : $4.2836