463L-S08-R Price, дистрибьютор, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Female Bulkhead to MCX Plug Right Angle Semi-Flexible Precision Cable 24 Inch Length Using PE-SR405FLJ Coax, RoHS., Radio frequency assembly N female bulkhead to MCX plug right angle semi-flexible precision cable 24 inch length using PE-SR405FLJ coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female bulkhead to MCX plug right angle semi-flexible precision cable 24 inch length using PE-SR405FLJ coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to MCX cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with N type bulkhead cable connection on one end and right angle MCX cable connection on the other. Our precision type N to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. This type N to MCX cable is a female to plug coax assembly, PE39463-24, can also be known as a precision type N jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. N type jack to MCX male cable assembly PE39463-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable N cable assembly is manufactured with type N to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency N type female bulkhead to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39463-24 can also be used in the other direction and will be right angle MCX plug to type N female bulkhead cable assembly if the opposite connectivity is required. Precision type N jack bulkhead to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to MCX cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to MCX plug right angle semi-flexible precision cable 24 inch length using PE-SR405FLJ coax, RoHS.

1 : $69.59
25 : $66.11
50 : $62.63
100 : $59.85

1,138

PE4630

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: BNC, Connector Gender: Female, Impedance: 75 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: 4 Hole Flange, Interface Type 1: Solder Cup. 75 Ohm BNC Female Connector Solder Attachment 4 Hole Flange Mount Solder Cup Terminal, .500 inch Hole Spacing. PE4630 BNC female 4 hole flange terminal connector has an interface type of solder cup and a 75 Ohm impedance. Pasternack BNC female 4 hole flange connector uses shield/contact solder as an attachment method. The Pasternack BNC female 4 hole flange terminal connector has a PTFE dielectric type. The Pasternack BNC terminal connector has a brass body with nickel plating. Our PE4630 BNC connector uses brass contact. This BNC female 4 hole flange terminal RF connector is RoHS and REACH compliant. This Pasternack female BNC 4 hole flange connector will ship the same day as purchased. Our 4 hole flange BNC female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BNC connector cable assemblies that will ship the same day as well.

1 : $35.99
25 : $34.19
50 : $32.39
100 : $30.95

979

PE3W07463

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Male Right Angle Cable Using RG402 Coax., Radio frequency assembly N female bulkhead to N male right angle cable using RG402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N male right angle cable using RG402 coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N bulkhead cable connection on one end and right angle type N cable connection on the other. Our N type to right angle type N cable assemblies have a female gender on end 1 and male on end 2. PE3W07463 can also be known as a type N jack to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N jack to N type plug cable assembly PE3W07463 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N female bulkhead to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07463 can also be used in the other direction and will be right angle type N male to type N female bulkhead cable assembly if the opposite connectivity is required. N type jack bulkhead to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N male right angle cable using RG402 coax.

358

PE3C6246-36

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum Snap-On 4.3-10 Male to SMA Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and TC-SPP250-SM-LP SMA cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-LP SMA cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-LP SMA cable is a male to male coax assembly, PE3C6246-36, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-SM-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-SM-LP SMA plug cable assembly PE3C6246-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-SM-LP SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6246-36 can also be used in the other direction and will be TC-SPP250-SM-LP SMA male to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-SM-LP SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93

PE7463-10

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Connector-Out Impedance: 50 Ohms, Max Freq: 12.4 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.6 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 10 Watts Up to 12.4 GHz. PE7463-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers, and detectors. Pasternack's PE7463-10 in-series fixed attenuator is available with a typical attenuation accuracy of 0.6 dB. The max input power rating (CW) of this RF attenuator is 10 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and +125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7463-10 10 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. This coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization, production systems, wifi 6E, 5G cellular bands applications. Our fixed RF attenuator PE7463-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you to the ideal RF coaxial fixed attenuator as per your requirement.

1 : $194.99
10 : $187.19
25 : $179.39
100 : $171.59

PE3C0463

Pasternack Enterprises

PE3W02463-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to SMA female low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3W02463-24 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3W02463-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02463-24 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female low loss cable 24 inch length using LMR-100 coax.

1 : $73.89
25 : $70.2
50 : $66.5
100 : $63.55

PE3W14636/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly N male to BNC male low loss cable 12 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to BNC male low loss cable 12 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a BNC cable connection on the other. Our low loss type N to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14636/HS-12 can also be known as a low loss type N plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14636/HS-12 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Type N plug to BNC plug cable assembly PE3W14636/HS-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14636/HS-12 can also be used in the other direction and will be a BNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $88.89
25 : $84.45
50 : $80.0
100 : $76.45

PE3W24635

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. 4.1/9.5 Mini DIN Male to 7/16 DIN Female Cable Using 1/4 inch Superflexible Coax. PE3W24635 is a 4.1/9.5 Mini DIN male to 7/16 DIN female cable using 1/4" Superflexible coax. This Pasternack 4.1/9.5 Mini DIN male to 7/16 DIN female cable assembly uses a 50 Ohm 4.1/9.5 Mini DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 4.1/9.5 Mini DIN to female 7/16 DIN cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W24635 4.1/9.5 Mini DIN male to 7/16 DIN female cable assembly is constructed with 1/4" Superflexible coax.

PE3W02463LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm.

PE3W04463/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Right Angle Cable Using RG196 Coax with HeatShrink. PE3W04463/HS is a BNC male to SMA male right angle cable using RG196 coax. This Pasternack BNC male to SMA male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04463/HS BNC male to SMA male right angle cable assembly is constructed with RG196 coax.

PE3W14636/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to BNC Male Low Loss Cable 48 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly N male to BNC male low loss cable 48 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to BNC male low loss cable 48 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a BNC cable connection on the other. Our low loss type N to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14636/HS-48 can also be known as a low loss type N plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14636/HS-48 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Type N plug to BNC plug cable assembly PE3W14636/HS-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14636/HS-48 can also be used in the other direction and will be a BNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

PE3W24634

Pasternack Enterprises

PE3W04637/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity N Male Cable Using RG58 Coax with HeatShrink. PE3W04637/HS is a reverse polarity TNC male to reverse polarity N male cable using RG58 coax. This Pasternack reverse polarity TNC male to reverse polarity N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male TNC to reverse polarity male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04637/HS TNC reverse polarity male to N reverse polarity male cable assembly is constructed with RG58 coax.

PE3W05463LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using RG223 Coax, LF Solder. PE3W05463LF is a SMA male right angle to SMA male right angle cable using RG223 coax. This Pasternack SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05463LF SMA male right angle to SMA male right angle cable assembly is constructed with RG223 coax.

TE Connectivity

1546307-4

TE Connectivity

4P .374 DR BARRIER,W/WASHER Number of Positions: 4 Barrier Strip Style: Dual Barrier Connector System: Wire-to-Wire Centerline (Pitch): .375 in Centerline (Pitch): 9.53 mm Barrier Strip | 4 Dual Barrier Wire-to-Wire .375" | Part Number: 1546307-4 | Internal Number: 1546307-4 | .375" | TE Connectivity
RoHS : Compliant

2,500 : $3.26
1,000 : $3.35
500 : $3.44
250 : $3.52
100 : $3.61
50 : $3.7
25 : $3.79
10 : $3.88
1 : $3.96

4,334

174463-1

TE Connectivity

070 MULTILOCK 2P P Nominal Voltage Architecture: 12 V Number of Positions: 2 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.8 mm Multilock Connector Housing | 12 V Housing for Female Terminals Wire-to-Wire | Part Number: 174463-1 | Internal Number: 174463-1 | 1.8 mm | TE Connectivity
RoHS : Compliant

10,000 : $0.19
5,000 : $0.23
2,500 : $0.31
1,000 : $0.42
500 : $0.62
100 : $0.75

4,287

4-794632-0

TE Connectivity

10P MICRO MNL ASSY,VRT,HDR,LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 10 | PCB Header & Receptacle | Part Number: 4-794632-0 | Internal Number: 4-794632-0 | TE Connectivity
RoHS : Compliant

1,000 : $2.14
100 : $2.87
10 : $3.54
1 : $4.47

3,786

5-146304-6

TE Connectivity

06 MODII HD SRRA B/A .100CL,LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 6 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 5-146304-6 | Internal Number: 5-146304-6 | TE Connectivity
RoHS : Compliant

5,000 : $1.78
2,500 : $1.82
1,000 : $1.86
500 : $1.91
250 : $1.95
100 : $1.99
50 : $2.04
25 : $2.08
10 : $2.12
1 : $2.17

3,000

1546306-7

TE Connectivity

7P .374 DR BARRIER STRIP Number of Positions: 7 Barrier Strip Style: Dual Barrier Connector System: Wire-to-Wire Centerline (Pitch): .375 in Centerline (Pitch): 9.53 mm Barrier Strip | 7 Dual Barrier Wire-to-Wire .375" | Part Number: 1546306-7 | Internal Number: 1546306-7 | .375" | TE Connectivity
RoHS : Compliant

2,500 : $5.7
1,000 : $5.85
500 : $6.0
250 : $6.16
100 : $6.31
50 : $6.47
25 : $6.62
10 : $6.77
1 : $6.93

2,476

1-1546306-5

TE Connectivity

15P.374 DR BARRIER STRIP Number of Positions: 15 Barrier Strip Style: Dual Barrier Connector System: Wire-to-Wire Centerline (Pitch): .375 in Centerline (Pitch): 9.53 mm Barrier Strip | 15 Dual Barrier Wire-to-Wire .375" | Part Number: 1-1546306-5 | Internal Number: 1-1546306-5 | .375" | TE Connectivity
RoHS : Compliant

2,500 : $8.14
1,000 : $8.36
500 : $8.58
250 : $8.8
100 : $9.02
50 : $9.24
25 : $9.46
10 : $9.68
1 : $9.9

1,780

4-794632-6

TE Connectivity

16P MICRO MNL ASSY,VRT,HDR,LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 16 | PCB Header & Receptacle | Part Number: 4-794632-6 | Internal Number: 4-794632-6 | TE Connectivity
RoHS : Compliant

1,000 : $3.81
100 : $4.73
25 : $4.99
10 : $5.78
1 : $6.44

795

4-794630-8

TE Connectivity

18P MICRO MNL ASSY,VRT,HDR,LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 18 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 18 | PCB Header & Receptacle | Part Number: 4-794630-8 | Internal Number: 4-794630-8 | TE Connectivity
RoHS : Compliant

1,000 : $1.53
100 : $2.05
10 : $2.53
1 : $3.2

715

1-826646-3

TE Connectivity

13P AMPMODU II STIFT LEI PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 13 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 1-826646-3 | Internal Number: 1-826646-3 | TE Connectivity
RoHS : Compliant

10,000 : $1.97
5,000 : $2.01
2,500 : $2.06
1,000 : $2.1
500 : $2.14
250 : $2.19
100 : $2.23
50 : $2.27
25 : $2.32
10 : $2.36
1 : $2.41

703

3-794637-8

TE Connectivity

08P MICRO MNL ASSY,VRT,SMT LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 8 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 8 | PCB Header & Receptacle | Part Number: 3-794637-8 | Internal Number: 3-794637-8 | TE Connectivity
RoHS : Compliant

1,000 : $3.1
100 : $3.85
25 : $4.07
10 : $4.71
1 : $5.24

559

3-794631-6

TE Connectivity

06P MICRO MNL ASSY,VRT,HDR LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 3-794631-6 | Internal Number: 3-794631-6 | TE Connectivity
RoHS : Compliant

1,000 : $1.26
100 : $1.7
10 : $2.09
1 : $2.64

523

4-794636-6

TE Connectivity

16P MICRO MNL ASSY,VRT,SMT,LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 16 | PCB Header & Receptacle | Part Number: 4-794636-6 | Internal Number: 4-794636-6 | TE Connectivity
RoHS : Compliant

1,000 : $3.4
100 : $4.22
25 : $4.45
10 : $5.15
1 : $5.74

440

179463-2

TE Connectivity

DBL LOCK CAP F/H 2P RED Number of Positions: 2 Connector & Housing Type: Cap Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 2 Cap Housing Crimp | Part Number: 179463-2 | Internal Number: 179463-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.23
100 : $0.31
10 : $0.39
1 : $0.49

306

4-794636-0

TE Connectivity

10P MICRO MNL ASSY,VRT,SMT,LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 10 | PCB Header & Receptacle | Part Number: 4-794636-0 | Internal Number: 4-794636-0 | TE Connectivity
RoHS : Compliant

1,000 : $2.41
100 : $2.99
25 : $3.16
10 : $3.65
1 : $4.07

125

646362-1

TE Connectivity

2MM HM ASY,T-D,HDR,8R,128P Hard Metric Backplane Connector | Part Number: 646362-1 | Internal Number: 646362-1 | TE Connectivity
RoHS : Compliant

1,000 : $7.14
500 : $7.34
250 : $7.57
100 : $7.83
50 : $8.05
1 : $8.84

Venkel Ltd.

TFCR0805-10W-K-2463DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;246K ;�0.5%
RoHS : Compliant

TFCR1206-8W-C-2463FT

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;246K ;�1%
RoHS : Compliant

TFCR1206-8W-E-2463BT

VENKEL LTD

Thin Film CR;1206;1/8W;�25PPM;246K ;�0.1%
RoHS : Compliant

TFCR1210-4W-K-2463BT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�100PPM;246K ;�0.1%
RoHS : Compliant

TFCR2010-4W-C-2463DT

VENKEL LTD

Thin Film CR;2010;1/4W;�50PPM;246K ;�0.5%
RoHS : Compliant

UPTF0805-10W-N-2463DT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;246K ;�0.5%
RoHS : Compliant

UPTF0603-16W-E-2463AT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�25PPM;246K ;�0.05%
RoHS : Compliant

UPTF1206-8W-N-2463AT

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;246K ;�0.05%
RoHS : Compliant

TFCR2512-2W-C-2463BT

VENKEL LTD

Thin Film CR;2512;1/2W;�50PPM;246K ;�0.1%
RoHS : Compliant

TFCR2512-2W-E-2463CT-1K

VENKEL LTD

Thin Film CR;2512;1/2W;�25PPM;246K ;�0.25%
RoHS : Compliant

TFCR0603-16W-K-2463DT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�100PPM;246K ;�0.5%
RoHS : Compliant

TFCR0805-8W-E-2463BT

VENKEL LTD

Thin Film CR;0805;1/8W;�25PPM;246K ;�0.1%
RoHS : Compliant

TFCR0805-8W-E-2463CT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�25PPM;246K ;�0.25%
RoHS : Compliant

TFCR2512-2W-K-2463FT-1K

VENKEL LTD

Thin Film CR;2512;1/2W;�100PPM;246K ;�1%
RoHS : Compliant

TFCR0805-10W-C-2463FT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;246K ;�1%
RoHS : Compliant

Vyrian

MAX6463XR42+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, 4.2, BICMOS, PDSO3
RoHS : Compliant

12,105

5962-01-369-0463

Analog Devices Inc

D/A Converter, 1 Func, PDIP24

11,755

5962-9463601MPX

Analog Devices Inc

Three Terminal Voltage Reference, 1 Output, 2.5V, Trim/Adjustable, CDIP8

11,214

MAX6463UR36+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, 3.6, BICMOS, PDSO3
RoHS : Compliant

10,791

MAX6463UR30+

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +3V, BICMOS, PDSO3
RoHS : Compliant

10,487

ADAU1463WBCPZ150RL

Analog Devices Inc

Consumer Circuit
RoHS : Compliant

10,302

MAX3463CSA+

Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
RoHS : Compliant

10,163

MAX4639EUE+

Analog Devices Inc

Differential Multiplexer, 1 Func, 4 Channel, CMOS, PDSO16
RoHS : Compliant

10,071

5962-9463301MLA

Analog Devices Inc

D/A Converter, 1 Func, Serial, Parallel, 8 Bits Input Loading, CDIP24
RoHS : Not Compliant

10,032

CY8C4547AZI-S463

Infineon Technologies AG

Programmable SoC, CMOS, PQFP48
RoHS : Compliant

9,459

MAX6463XR28+

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, 2.8, BICMOS, PDSO3
RoHS : Compliant

8,259

MAX6463UK28+

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, 2.8, BICMOS, PDSO5
RoHS : Compliant

6,886

ADS5463IPFPG4

Texas Instruments

ADC, Proprietary Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, Bipolar, PQFP80
RoHS : Compliant

4,492

MAX4631CPE

Maxim Integrated Products

SPST, 2 Func, 1 Channel, CMOS, PDIP16
RoHS : Not Compliant

4,245

71973-0463

Molex

Board Connector, 126 Contact(s), 2 Row(s), Female, Right Angle, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle
RoHS : Compliant

704

Waytek, Inc.

8463

Heyco

Black Nylon 1/2 NPT Locknut LIKE PN 24641

25 : $0.2395
50 : $0.2303
100 : $0.2198
200 : $0.2119
500 : $0.2027
1,000 : $0.1935

6,632

15344631

Aptiv PLC

Terminal Male Delphi Ducon 6.3 Sealed 10-12GA 15344631 Reel Use with 46089
RoHS : Compliant

1,500 : $0.3855
6,500 : $0.36

6,000

13834630

Aptiv PLC

Red Cable Seal OCS 1.5 Series, 0.35-0.50(mm2) 21 Ga

100 : $0.0227
200 : $0.0219
500 : $0.0211
1,000 : $0.0202
5,000 : $0.0196

5,085

146370-91IE

General Cable Technologies Corporation

8GA GXL Gray Cross-Link Automotive Wire XLPE -51C to 125C

250 : $0.8164
500 : $0.6683
1,500 : $0.5837

4,250

146310-91IE

General Cable Technologies Corporation

8Ga TXL Orange Cross-Link Automotive Wire XLPE -51°C to 125°C

250 : $1.1492
500 : $0.8919
1,000 : $0.7218
2,500 : $0.6181

1,250

15344631-L

Aptiv PLC

Male Terminal Delphi Ducon 6.3 Sealed 10-12GA 15344631 USE WITH 46089 TOOL 392 & 385

10 : $0.8788
50 : $0.7837
100 : $0.7118
200 : $0.6886
500 : $0.6655
1,000 : $0.6399

927

13521463

Aptiv PLC

5 Way Female GT 280 Connector Delphi 13521463

1 : $1.4624
50 : $1.3036
100 : $1.1831
200 : $1.1447
500 : $1.1063
1,000 : $1.0626

279

15344632-L

Aptiv PLC

Male Terminal Delphi Ducon 6.3 Sealed 14-16 GA 15344632 USE WITH 46089 TOOL 393 & 385

10 : $0.9185
50 : $0.8191
100 : $0.7439
200 : $0.7197
500 : $0.6956
1,000 : $0.6687

463L-S08-R дистрибьютор

ссылки URL