| поискавой системы для электроныых деталей |
|
4212-3R3M-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | TMUXHS4212RKST![]() | Texas Instruments | RoHS : Compliant | 142,980 | ||
TMUXHS4212RKSR![]() | Texas Instruments | RoHS : Compliant | 60,962 | |||
TMUXHS4212IRKST![]() | Texas Instruments | RoHS : Compliant | 28,584 | |||
TMUXHS4212IRKSR![]() | Texas Instruments | RoHS : Compliant | 19,016 | |||
BU4212F-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
BU4212G-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
![]() ComSIT USA | 744212510 | AVAILABLE EU | 128 | |||
![]() PUI | 12.94212 | 385 | ||||
![]() Rutronik | IRFI4212H-117PXKMA1 | Infineon Technologies AG | DUAL N-CH 100V 11A 58mOhm TO220FP RoHS : Compliant |
| 1,000 | |
| HFD42/12-3 | Xiamen Hongfa Electroacoustic Co.,Ltd. | Signal Relay 12DC THT 2C 4A RoHS : Compliant |
| 10 | ||
![]() Avnet Silica | SC4212MLTRT![]() | Semtech Corporation | LDO Regulator Pos 05V to 5V 1A 8Pin MLPD EP TR (Alt: SC4212MLTRT) RoHS : Compliant | 3,000 | ||
| GC4942-12 | Microchip Technology Inc | (Alt: GC4942-12) RoHS : Compliant | 0 | |||
BU4212G-TR![]() | ROHM Semiconductor | (Alt: BU4212G-TR) RoHS : Compliant | 0 | |||
| ISL94212INZ | Renesas Electronics Corporation | (Alt: ISL94212INZ) RoHS : Compliant | 0 | |||
| SC4212BMLTRC | Semtech Corporation | Very Low Input Very Low Dropout Regulator 1A 150mV Maximum Dropout Voltage 8Pin MLPD TR (Alt: SC4212BMLTRC) RoHS : Compliant | 0 | |||
| XC61FN4212MRN | Torex Semiconductor LTD | Volt Supervisor Detect WDelay Circuit 4284V 10V 3Pin SOT23 TR (Alt: XC61FN4212MRN) RoHS : Compliant | 0 | |||
| ISL94212INZ-T | Renesas Electronics Corporation | (Alt: ISL94212INZ-T) RoHS : Compliant | 0 | |||
74AHC1G4212GWH![]() | Nexperia | Counter Divide by 2 74AHC Family 165MHz Max Count 4096 2V to 55V Supply TSSOP5 (Alt: 74AHC1G4212GWH) RoHS : Compliant | 0 | |||
| ISL94212EVKIT1Z | Renesas Electronics Corporation | (Alt: ISL94212EVKIT1Z) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMEHR50-42120Z | Aimtec | RoHS : Compliant |
| 0 | |
| AMER50-42120Z | Aimtec | RoHS : Compliant |
| 0 | ||
| AMER50N-42120Z | Aimtec | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | FP42-120R-2% | Vishay Dale | IN STOCK SHIP TODAY |
| 500 | |
| 1-520421-2 | TE Connectivity | IN STOCK SHIP TODAY | 300 | |||
| M39014/2-1296 | Kyocera AVX Components | IN STOCK SHIP TODAY | 215 | |||
| 2222-344-21224 | Philips Semiconductors | IN STOCK SHIP TODAY | 182 | |||
| SC-A1421-25.000MHZ | NEL | IN STOCK SHIP TODAY |
| 37 | ||
| 153-060-524-212 | IN STOCK SHIP TODAY | 32 | ||||
MAX4212EUK-T![]() | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 29 | ||
| ECS-42-12-4 | ECS International Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
TPS2421-2DDAR![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| M39014/2-1246 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 3 | |||
| 142128-01 | IN STOCK SHIP TODAY | 2 | ||||
| 7042-128-197 | Wells-CTI | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | 504212201330 | Essentra Components | LINEAR HANDLE LATCH V2 D13 C30 | 0 | ||
| 4212V | Heyco | CH RA-65 ABV NATURAL | 0 | |||
| D8-314-212-191 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| E2-42-1250-16 | Southco | 0 | ||||
| E5-8-042-121 | Southco | E5-8-042-121 | 0 | |||
| 2042122007001 | Essentra Components | SWINGHANDLE LATCH, LINEAR - KE | 0 | |||
| 304212040050 | Essentra Components | 0 | ||||
| 504212202830 | Essentra Components | LINEAR HANDLE LATCH V2 D28 C30 | 0 | |||
| 5562-N-140-042-125 | RAF Electronic Hardware | 0 | ||||
| 5042122003301 | Essentra Components | LINEAR HANDLE LATCH V2 D03 C30 | 0 | |||
| 504212209130 | Essentra Components | LINEAR HANDLE LATCH V2 D91 C30 | 0 | |||
| 4212A | Heyco | CH RA-65 ABA NATURAL RoHS : Compliant | 0 | |||
| 5042122091301 | Essentra Components | LINEAR HANDLE LATCH V2 D91 C30 | 0 | |||
| MC-90-421-21-10 | Southco | MC-90-421-21-10 | 0 | |||
| 504212201530 | Essentra Components | LINEAR HANDLE LATCH V2 D15 C30 | 0 | |||
![]() EBV Elektronik | IRFI4212H-117PXKMA1 | Infineon Technologies AG | Transistor MOSFET Array Dual NChannel 100V 11A 5Pin TO220FP Tube (Alt: SP005547285) RoHS : Compliant | 6,000 | ||
| GC4942-12 | Microchip Technology Inc | (Alt: GC4942-12) RoHS : Compliant | 0 | |||
| AFBR-S6EPR44212 | Broadcom Limited | Pyroelectric IR Flame Sensor 391m Serial I2C 1 CH TO39 (Alt: AFBR-S6EPR44212) RoHS : Compliant | 0 | |||
| VS-VSKH142/12PBF | Vishay Intertechnologies | Modules Thyristors IAP DBC (Alt: VS-VSKH142/12PBF) RoHS : Compliant | 0 | |||
| CD8069504212601S RFB9 | Intel Corporation | (Alt: 999CM1) RoHS : Compliant | 0 | |||
| CD8069504212701S RFBA | Intel Corporation | MPU Xeon Silver 4215 25GHz CISC 3647Pin FCLGA Tray (Alt: 999CM2) RoHS : Compliant | 0 | |||
| W1202-495033/AFBR-S6EPR44212 | Broadcom Limited | Digital TO sensor 391Am IR Flame Detection Sensor Engineering sample (Alt: W1202-495033/AFBR-S6EPR44212) RoHS : Compliant | 0 | |||
![]() Maritex | JS-1142-12 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 2.54mm; 12-contacts; female; applicable wire AWG#22-30; 250V/3A |
| 1,040 | |
| OSB4212411C-TR10 | OptoSupply Limited | Light-Emitting Diode, reverse mount, blue, 455-465 nm, 3000-4200 mcd/20 mA, water clear, 10 degree, Optosupply /1000 |
| 378 | ||
| 936421-2 | TE Connectivity | Automotive Connectors; 936421-2; TE CONNECTIVITY; Black; 42; Yes; 51.816 mm RoHS : Compliant |
| 89 | ||
| G14A42121B12HR | Amphenol Corporation | Plug-in Connector Accessories; G14A42121B12HR; AMPHENOL; Yes; 4.1 mm |
| 12 | ||
![]() Neutron USA | 242124 | Amphenol Corporation | Adapters - Between Series SMA PLUG TO TNC JACK ADAPTER RoHS : Compliant |
| 50 | |
| 242121 | Amphenol Corporation | Adapters - Between Series BNC JACK TO N PLUG ADAPTER RoHS : Compliant |
| 50 | ||
| 73284-2120 | Molex | D-Sub Adapters & Gender Changers ADAPTER |
| 47 | ||
| 1942120000 | Weidmüller Interface GmbH & Co. KG | Headers & Wire Housings SC 3.81/07/90G 3.2SN OR BX RoHS : Compliant |
| 35 | ||
| 09642127210 | HARTING Technology Group | D-Sub Standard Connectors 15P FEMALE STRAIGHT 47 pf THRU HOLE RoHS : Compliant |
| 17 | ||
| 84212005 | Crouzet | Thumbwheel Switches & Pushwheel Switches Manual Switch, Thumbwheel Selector Switch, 8421 Series, 84212 M02 C G N S |
| 15 | ||
| GTB6-P4212 | SICK AG | Mini Photoelectric Sensor; Proximity; Bckgrnd Suppres; 140mm; Visbl Red; PNP |
| 12 | ||
| HTL4-212121AA12 | OTTO Engineering Inc | Joysticks Ext Castle Boot 0.970in SQ.Black RoHS : Compliant |
| 4 | ||
| 84212013 | Crouzet | Thumbwheel Switches & Pushwheel Switches Manual Switch, Thumbwheel Selector Switch, 8421 Series, 84212 M02 C N N S |
| 3 | ||
| 4204212 | WIKA Instrument LP | Wika Instruments 4204212 Analogue Positive Press Gauge Bottom Entry 10psi, Connection Size 1/4 NPT |
| 0 | ||
| GL6-P4212 | SICK AG | Miniature PE Sensor, Retro, Dual lens, R: 5m, 650nm, DC PNP L/D, M8 Conn, 1062110 |
| 0 | ||
| 3274212 | Phoenix Contact | Distribution Block, Horiz Align, 1row 19Conn, 690V 24 A, 12AWG, 56.5 mm W, PTFIX 6/18X2,5-NS15A BU RoHS : Compliant |
| 0 | ||
| 4212053-0001 | WIKA Instrument LP | Wika Instruments 4212053-0001 Pressure Gauge;analog;4in;lower mount;213.54 4 100PSI 1/4 L |
| 0 | ||
| 1.30.270.421/2600 | RAFI GmbH & Co Kg | Pushbutton Actuator,RAFIX 22 FS+,Illuminative,MOM,Raised Metallic Ring,Blue Len |
| 0 | ||
| TMM 24212C | Traco Power | Switching Power Supplies |
| 0 | ||
![]() Pasternack Enterprises US | PE3CA2342-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief TRB Plug to Blunt Cut Genderless 1553 Cable 12 Inch Length Using 78 Ohm M17/176-00002 Coax., Radio frequency assembly bend relief TRB plug to blunt cut genderless 1553 cable 12 inch length using 78 Ohm M17/176-00002 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief TRB plug to blunt cut genderless 1553 cable 12 inch length using 78 Ohm M17/176-00002 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3CA2342-12 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3CA2342-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA2342-12 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief TRB plug to blunt cut genderless 1553 cable 12 inch length using 78 Ohm M17/176-00002 coax. |
| 208 | |
| PE3MP2042-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. TRB 3-Slot Right Angle Plug with Blunt Cut for 78 Ohm M17/176-00002 Cable, 12" Cable., Radio frequency assembly TRB 3-Slot right angle plug with blunt cut for 78 Ohm M17/176-00002 cable, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Slot right angle plug with blunt cut for 78 Ohm M17/176-00002 cable, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with right angle TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 right angle TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2042-12 can also be known as a 1553 right angle TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2042-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with right angle TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB right angle plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2042-12 can also be used in the other direction and will be blunt cut genderless to right angle TRB plug cable assembly if the opposite connectivity is required. 1553 TRB right angle male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Slot right angle plug with blunt cut for 78 Ohm M17/176-00002 cable, 12" cable. |
| 22 | ||
| PE3W17842-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to N Female Bulkhead Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3W17842-12 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17842-12 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. 2.92mm plug to type N jack cable assembly PE3W17842-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17842-12 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. |
| 21 | ||
| PE3C6242-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 4.3-10 Male Right Angle to N Male Right Angle Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male right angle to N male right angle low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male right angle to N male right angle low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-NM-RA-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-250-4310M-RA-LP 4.3-10 cable connection on one end and right angle TC-SPP250-NM-RA-LP type N cable connection on the other. Our low PIM right angle TC-250-4310M-RA-LP 4.3-10 to right angle TC-SPP250-NM-RA-LP type N cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-NM-RA-LP type N cable is a male to male coax assembly, PE3C6242-12, can also be known as a low PIM right angle TC-250-4310M-RA-LP 4.3-10 plug to right angle TC-SPP250-NM-RA-LP N type plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-RA-LP 4.3-10 plug to TC-SPP250-NM-RA-LP type N plug cable assembly PE3C6242-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-RA-LP 4.3-10 cable assembly is manufactured with right angle TC-250-4310M-RA-LP 4.3-10 to right angle TC-SPP250-NM-RA-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-RA-LP 4.3-10 right angle male to TC-SPP250-NM-RA-LP N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6242-12 can also be used in the other direction and will be right angle TC-SPP250-NM-RA-LP type N male to right angle TC-250-4310M-RA-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-RA-LP 4.3-10 right angle plug to TC-SPP250-NM-RA-LP N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-NM-RA-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-RA-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male right angle to N male right angle low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 8 | ||
| PE3MP2442-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. TRB 3-Lug Jack with Blunt Cut for 78 Ohm PE-30-02003, 12" Cable., Radio frequency assembly TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2442-12 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2442-12 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2442-12 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 12" cable. |
| 5 | ||
| PE3MSA00542-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Lead Free 78 Ohm 3-Slot TRB Solder/Clamp Plug to 3-Lug TRB Solder/Clamp Jack for PE-30-02001 Twinax (.242 O.D.) 12" Cable., Radio frequency assembly lead free 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 12" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00542-12 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00542-12 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00542-12 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 12" cable. |
| 3 | ||
| PE3C9742-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini SMP Female to 2.92mm Male VITA 67 Cable 12 Inch Length Using PE-P086HF Coax with HeatShrink., Radio frequency assembly mini SMP female to 2.92mm male VITA 67 cable 12 inch length using PE-P086HF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female to 2.92mm male VITA 67 cable 12 inch length using PE-P086HF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax vita 67 cable assembly is built with mini SMP cable connection on one end and 2.92mm cable connection on the other. Our vita 67 mini SMP to 2.92mm cable assemblies have a female gender on end 1 and male on end 2. PE3C9742-12 can also be known as a vita 67 mini SMP jack to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to 2.92mm plug cable assembly PE3C9742-12 is built with which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance. RF specs on this 40 GHz maximum frequency mini SMP female to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9742-12 can also be used in the other direction and will be 2.92mm male to mini SMP female cable assembly if the opposite connectivity is required. Vita 67 mini SMP jack to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to 2.92mm male VITA 67 cable 12 inch length using PE-P086HF coax with heatshrink. |
| 0 | ||
| PE3W14212 | Pasternack Enterprises | Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. NMO Mount Sexless to TNC Male Cable Using LMR-195 Coax. PE3W14212 is a NMO Mount sexless to TNC male cable using LMR-195 coax. This Pasternack NMO Mount sexless to TNC male cable assembly uses a 50 Ohm NMO Mount for connector 1 and a 50 Ohm TNC for connector 2. Our sexless NMO Mount to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14212 NMO Mount sexless to TNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16742-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug Right Angle to SMA Female Bulkhead Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly reverse polarity SMA plug right angle to SMA female bulkhead cable 12 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The reverse polarity SMA plug right angle to SMA female bulkhead cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle reverse polarity SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a female on end 2. PE3W16742-12 can also be known as a right angle reverse polarity SMA male to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16742-12 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has an in-series connection. Reverse polarity SMA male to SMA jack cable assembly PE3W16742-12 is built with RG178 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16742-12 can also be used in the other direction and will be a SMA female bulkhead to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W04212 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. TNC Male to N Male Cable Using RG58 Coax. PE3W04212 is a TNC male to N male cable using RG58 coax. This Pasternack TNC male to N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04212 TNC male to N male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W16942-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to N Female 4 Hole Flange Cable 12 Inch Length Using RG401 Coax., Radio frequency assembly N female bulkhead to N female 4 hole flange cable 12 inch length using RG401 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N female 4 hole flange cable 12 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a type N 4 hole flange cable connection on the other. Our type N to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W16942-12 can also be known as a type N jack to type N jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. Type N jack to type N jack cable assembly PE3W16942-12 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16942-12 can also be used in the other direction and will be a type N female 4 hole flange to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7342-12 | Pasternack Enterprises |
| 0 | |||
| PE3W04442-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Right Angle Cable 12 Inch Length Using RG188 Coax., Radio frequency assembly SMA male to SMA male right angle cable 12 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 12 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W04442-12, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W04442-12 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 400 MHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04442-12 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 12 inch length using RG188 coax. |
| 0 | ||
| PE36542-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 12 inches. 10-32 Male to BNC Male Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly 10-32 male to BNC male cable 12 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 male to BNC male cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10-32 cable connection on one end and BNC cable connection on the other. Our 10-32 to BNC cable assemblies have a male gender on end 1 and male on end 2. This 10-32 to BNC cable is a male to male coax assembly, PE36542-12, can also be known as a 10-32 plug to BNC plug cable assembly and will be shipped same-day as it is purchased. 10-32 plug to BNC plug cable assembly PE36542-12 is built with RG316 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency 10-32 male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36542-12 can also be used in the other direction and will be BNC male to 10-32 male cable assembly if the opposite connectivity is required. 10-32 plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 male to BNC male cable 12 inch length using RG316 coax. |
| 0 | ||
| PE3C8242-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. 4.3-10 Female to 7/16 DIN Male Right Angle Low PIM Cable 12 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 female to 7/16 DIN male right angle low PIM cable 12 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 female to 7/16 DIN male right angle low PIM cable 12 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to right angle 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8242-12, can also be known as a low PIM 4.3-10 jack to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8242-12 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8242-12 can also be used in the other direction and will be right angle 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 female to 7/16 DIN male right angle low PIM cable 12 inch length using TFT-402 coax using Times Microwave components. |
| 0 | ||
![]() Relay Specialties | 7142-12-1000 | Coto Technology USA | Reed Relay, PC Board, Mounting 12 VDC, 2C DPDT ES Shield: No, RF Shield: N/A RoHS : Compliant |
| 138 | |
![]() Vyrian | T1440242125-200 | TE Connectivity | Connector Accessory, Aluminum Alloy RoHS : Compliant | 11,822 | ||
| LTC4212IMS | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, PDSO10 RoHS : Not Compliant | 11,418 | |||
ADF4212LBCPZ![]() | Analog Devices Inc | PLL Frequency Synthesizer, CMOS RoHS : Compliant | 11,330 | |||
ADF4212LBRUZ-RL![]() | Analog Devices Inc | PLL Frequency Synthesizer, CMOS, PDSO20 RoHS : Compliant | 10,768 | |||
ADF4212LBRUZ-REEL7![]() | Analog Devices Inc | PLL Frequency Synthesizer, PDSO20 RoHS : Compliant | 10,486 | |||
ADF4212LBRU-REEL7![]() | Analog Devices Inc | PLL Frequency Synthesizer, CMOS, PDSO20 RoHS : Not Compliant | 9,523 | |||
CDC421212RGERG4![]() | Texas Instruments | Clock Generator, 312.5MHz, CMOS, PQCC24 RoHS : Compliant | 8,991 | |||
PT4212C![]() | Texas Instruments | DC-DC Regulated Power Supply Module, 1 Output, 5W, Hybrid RoHS : Not Compliant | 7,944 | |||
| MAX4212EUK+T | Analog Devices Inc | Operational Amplifier, 1 Func, PDSO5 RoHS : Compliant | 7,526 | |||
ADF4212BCP![]() | Analog Devices Inc | PLL Frequency Synthesizer, CMOS RoHS : Not Compliant | 6,363 | |||
| CDC421212RGET4G | Texas Instruments | Clock Generator, PQCC20 | 5,882 | |||
| R54212FNQR | Texas Instruments | 5,881 | ||||
| 74AHC1G4212GW-Q100 | Nexperia | Logic Circuit RoHS : Compliant | 5,870 | |||
PT4212A![]() | Texas Instruments | DC-DC Regulated Power Supply Module, 1 Output, 5W, Hybrid RoHS : Not Compliant | 5,843 | |||
| CT442129 | Micron Technology, Inc | 3,337 | ||||
![]() Waytek, Inc. | 50-84-2120 | Molex | Connector REC MLX 12 Contacts 2.13 MM MOLEX 50-84-2120 REPLACED 38162 TYCO 1-480709-0 RoHS : Compliant |
| 1,766 | |
| 34-212EP | Pollak | Pollak 34-212EP heavy-duty toggle switch is an SPST On-Off switch rated 50A for high-current panel controls. It features a heavy-duty construction, push-on terminals, panel-mount design, and high amp capacity for demanding electrical switching applications. |
| 582 | ||
![]() Win Source Electronics | MAX4212EUK-T![]() | Maxim Integrated Products | VIDEO AMPLIFIER, 1 CHANNEL(S), 1 / Voltage Feedback Amplifier 1 Circuit Rail-to-Rail SOT-23-5 RoHS : Not Compliant |
| 100,000 | |
| ISL94212INZ | Renesas Electronics Corporation | Multi-Cell Li-Ion Battery Manager | IC BATTERY MONITOR 64TQFP RoHS : Compliant |
| 83,333 | ||
| ISL94212INZ-T | Intersil Corporation | IC BATTERY MONITOR 64TQFP |
| 77,400 | ||
| 744212100 | Wurth Elektronik | WE-SL1 SMD Common Mode Line Filter | CMC 10UH 300MA 2LN 1.2 KOHM SMD RoHS : Compliant |
| 48,000 | ||
MAX4212EUK![]() | Maxim Integrated Products | IC OPAMP VFB 1 CIRCUIT SOT23-5 / Voltage Feedback Amplifier 1 Circuit Rail-to-Rail SOT-23-5 RoHS : Not Compliant |
| 35,000 | ||
| IRFI4212H-117P | Infineon Technologies AG | Trans MOSFET N-CH Si 100V 11A 5-Pin(5+Tab) TO-220FP Tube / MOSFET 2N-CH 100V 11A TO-220FP-5 RoHS : Compliant |
| 28,260 | ||
| IRFI4212H-117PXKMA1 | Infineon Technologies AG | MOSFET 2N-CH 100V 11A TO220-5 / Mosfet Array 2 N-Channel (Dual) 100V 11A (Tc) 18W (Tc) Through Hole TO-220-5 Full-Pak RoHS : Compliant |
| 25,960 | ||
| 744212331 | Wurth Elektronik | Common Mode Chokes Dual 330uH 2kOhm 10kHz 0.3A 0.3Ohm DCR SMD T/R / WE-SL1 SMD Common Mode Line Filter | CMC 330UH 300MA 2LN 2 KOHM SMD RoHS : Compliant |
| 14,800 | ||
TPS2421-2DDA![]() | Texas Instruments | Hot Swap Controller 1-CH 20V N-Channel Positive Voltage 8-Pin HSOP EP Tube / IC CTRLR HOT SWAP 3-20V 8SOPWR RoHS : Compliant |
| 13,613 | ||
TPS2421-2DDAR![]() | Texas Instruments | IC CTRLR HOT SWAP 3-20V 8SOPWR / Hot Swap Controller 1-CH 20V N-Channel Positive Voltage 8-Pin HSOP EP T/R RoHS : Compliant |
| 12,740 | ||
| 744212510 | Wurth Elektronik | CMC 51UH 300MA 2LN 300 OHM SMD / 51 μH @ 100 kHz 2 Line Common Mode Choke Surface Mount 300 Ohms @ 300 MHz 300mA DCR 160mOhm RoHS : Compliant |
| 12,000 | ||
| 748421245 | Wurth Elektronik | BALUN 2.4GHZ-2.5GHZ 50/100 0805 RoHS : Compliant |
| 7,615 | ||
MAX4212EUK+T![]() | Maxim Integrated Products | IC OPAMP VFB 300MHZ RRO SOT23-5 / Op Amp Single High Speed Amplifier R-R O/P ±5.5V/11V 5-Pin SOT-23 T/R RoHS : Compliant |
| 5,000 | ||
| 0242.125UR | Littelfuse Inc | FUSE CARTRIDGE 125MA 250VAC/VDC / 125mA 250 V AC 250 V DC Fuse Cartridge Surface Mount RoHS : Compliant |
| 2,000 | ||
TPSM84212EAB![]() | Texas Instruments | DC DC CONVERTER 12V / Linear Regulator Replacement DC DC Converter 1 Output 12V 1.5A 14.5V - 28V Input RoHS : Compliant |
| 383 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |