240CCNUNNFZCWC Price, дистрибьютор, Stock

The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use.

E3-124-030

Southco

E3-124-030

J95-24/0T-NI

Sugatsune Kogyo Co Ltd

HEAVY DUTY CONCEALED HINGE (INSET)

DM0240-1C

Essentra Components

0.240 ID 1.000 LENGTHPVC DIP Y

K5-2405-08

Southco

R4-05-42-405-10

Southco

R4-05-42-405-10

091024075TEG

Essentra Components

SLOTTED THUMB SCREW, 10-24 THR

Flip Electronics

MUN2240T1G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.01

369,000

MMUN2240LT1G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.01

144,000

NSR0240P2T5G

onsemi

Stock, Ship Today
RoHS : Compliant

128,000

NCP114AMX240TCG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.03

105,000

NC7WZ240L8X

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.1

27,969

MM74HC240SJX

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.28

9,463

CP2401-GQR

Silicon Laboratories Inc

Stock, Ship Today

2,940

74LCX240SJ

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.25

1,779

S9S12G240F0CLL

NXP Semiconductors

Stock
RoHS : Compliant

900

DSP56321VL240

NXP Semiconductors

Stock
RoHS : Compliant

349

T4240NSE7PQB

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

1 : $1,088.1

329

EPF10K130EQC240-2N

Altera Corporation

Stock, Ship Today
RoHS : Compliant

1 : $247.5

305

M83240G13

NXP Semiconductors

Stock, Ship Today

1 : $18.44

281

IXTX240N075L2

Littelfuse Inc

Stock
RoHS : Compliant

EPF10K100EQC240-1N

Altera Corporation

Stock
RoHS : Compliant

Pasternack Enterprises US

PE7162-40

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 40 dB, Connector Series 1: SMA, Connector Gender 1: Male, Connector Series 2: SMA, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 40 dB Fixed Attenuator, SMA Male to SMA Female Passivated Stainless Steel Body Rated to 2 Watts Up to 6 GHz. PE7162-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7162-40 40 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7162-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3C7240

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm.

PE3W01240

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. Clamped SMA Male to SMA Male Low Loss Cable Using PE-P195 Coax., Radio frequency assembly clamped SMA male to SMA male low loss cable using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male to SMA male low loss cable using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01240 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01240 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male to SMA male low loss cable using PE-P195 coax.

PE3W01240-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Clamped SMA Male to SMA Male Low Loss Cable 12 Inch Length Using PE-P195 Coax., Radio frequency assembly clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01240-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01240-12 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax.

1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09

PE3W01814-240

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 240 inches. N Male to N Male Low Loss Cable 240 Inch Length Using LMR-600-DB Coax with Solderless Times Microwave Components., Radio frequency assembly N male to N male low loss cable 240 inch length using LMR-600-DB coax with solderless Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 240 inch length using LMR-600-DB coax with solderless Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W01814-240 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W01814-240 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 240 inch length using LMR-600-DB coax with solderless Times Microwave components.

1 : $241.99
25 : $229.89
50 : $217.79
100 : $208.11

PE3W07240LF/HS-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to BNC Male Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to BNC male low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W07240LF/HS-100CM can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W07240LF/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07240LF/HS-100CM can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder.

1 : $72.79
25 : $69.15
50 : $65.51
100 : $62.6

PE3W14240/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: Double Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Double Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. Double Banana Plug to Double Banana Plug Cable Using LMR-195-UF Coax with HeatShrink. PE3W14240/HS is a Double Banana plug to Double Banana plug cable using LMR-195-UF coax. This Pasternack Double Banana plug to Double Banana plug cable assembly uses a 50 Ohm Double Banana for connector 1 and a 50 Ohm Double Banana for connector 2. Our plug Double Banana to plug Double Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14240/HS Double Banana plug to Double Banana plug cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W24063/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to N Male Right Angle Cable Using TFT-5G-402 Coax with HeatShrink. PE3W24063/HS is a QMA male right angle to N male right angle cable using TFT-5G-402 coax. This Pasternack QMA male right angle to N male right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm N for connector 2. QMA right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24063/HS QMA male right angle to N male right angle cable assembly is constructed with TFT-5G-402 coax.

PE3W24092

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. HN Male to N Female Bulkhead Cable Using LMR-195 Coax. PE3W24092 is a HN male to N female bulkhead cable using LMR-195 coax. This Pasternack HN male to N female bulkhead cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. Our male HN to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24092 HN male to N female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE38240-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Female Bulkhead Cable 12 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 12 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female bulkhead cable 12 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE38240-12, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE38240-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38240-12 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 12 inch length using PE-C100-LSZH coax.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

EZ-240-QM-X

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: QMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Non-Solder Contact, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 8 GHz, Interface Type 1: LMR-240, Interface Type 2: LMR-240-DB, Interface Type 3: LMR-240-UF, Interface Type 4: LMR-240-FR, Interface Type 5: RG8X, Interface Type 6: PE-C240. QMA Male QD Connector Crimp/Non-Solder Contact Attachment for LMR-240, LMR-240-DB, LMR-240-UF, LMR-240-FR, RG8X, PE-C240. EZ-240-QM-X QMA male coaxial QD connector has an interface type of QMA male LMR-240, LMR-240-DB, LMR-240-UF, LMR-240-FR, RG8X and PE-C240 and a 50 Ohm impedance. Pasternack's QMA male connector uses crimp/non-solder contact as an attachment method. Our male QMA coaxial connector provides a maximum frequency of 8 GHz. The Pasternack QMA male coaxial QD connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's QMA coaxial connector has a brass body with tri-metal plating. Our EZ-240-QM-X QMA connector uses gold-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector is made from brass material and has a contact life of 100 cycles or more. Our high-quality EZ-240-QM-X features an 80 μin minimum body plating specification. The EZ-240-QM-X QMA connector operates at a temperature range of -40 to 125 deg C. This push-on male coaxial RF connector has a maximum insertion loss of 0.28 dB. This Pasternack male QMA connector will ship the same business day as purchased. Our QMA male connector is part of RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $20.24
25 : $19.43
50 : $18.82
100 : $18.42

PE38240-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Female Bulkhead Cable 60 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 60 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female bulkhead cable 60 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE38240-60, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE38240-60 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38240-60 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 60 inch length using PE-C100-LSZH coax.

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

PE3C6120-240

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-C600, RF Cable Type: PE-C600, RF Cable Impedance: 50 Ohm, Length, Max: 240 inches. 7/16 DIN Male to N Male Low Loss Cable 240 Inch Length Using PE-C600 Coax., Radio frequency assembly 7/16 DIN male to N male low loss cable 240 inch length using PE-C600 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to N male low loss cable 240 inch length using PE-C600 coax, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and N type cable connection on the other. Our low loss 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C6120-240 can also be known as a low loss 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C6120-240 is built with PE-C600 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6120-240 can also be used in the other direction and will be N type male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to N male low loss cable 240 inch length using PE-C600 coax.

1 : $282.99
25 : $268.84
50 : $254.69
100 : $243.37

PE3W01240-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Clamped SMA Male to SMA Male Low Loss Cable 60 Inch Length Using PE-P195 Coax., Radio frequency assembly clamped SMA male to SMA male low loss cable 60 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male to SMA male low loss cable 60 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01240-60 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01240-60 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male to SMA male low loss cable 60 inch length using PE-P195 coax.

1 : $207.99
25 : $197.59
50 : $187.19
100 : $178.87

PE3W13240

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. QMA Male to QMA Male Cable Using LMR-195-UF Coax. PE3W13240 is a QMA male to QMA male cable using LMR-195-UF coax. This Pasternack QMA male to QMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm QMA for connector 2. Our male QMA to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13240 QMA male to QMA male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

TE Connectivity

2-406541-2

TE Connectivity

MJ,INV,1X1,6PNL G,.100ST,SN,NARROW POST Modular Jack & Plug Interface Type: RJ45 Port Configuration: Single Port Port Matrix Configuration: 1 x 1 Modular Jacks & Plugs Products: RJ Type Jacks & Plugs Modular Connector Style: Jack RJ45 Single Port 1 x 1 RJ Type Jacks & Plugs | Rj45 Connector | Part Number: 2-406541-2 | Internal Number: 2-406541-2 | TE Connectivity
RoHS : Compliant

1,000 : $2.06
500 : $2.12
250 : $2.18
100 : $2.26
50 : $2.32
1 : $2.55

2,731

ROX9J240R

TE Connectivity

9W STD M/OX 5% 240R Resistance Value: 240 Ω Element Type: Metal Oxide Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Power Rating: 9 W Through-Hole Resistor | 240 Ω Metal Oxide Film General Purpose Resistor 5 % | Part Number: ROX9J240R | Internal Number: 1-2176416-7 | TE Connectivity
RoHS : Compliant

1,000 : $2.28
500 : $2.35
250 : $2.42
100 : $2.49
50 : $2.56
25 : $2.63
10 : $2.7
1 : $2.77

1,785

1-1393240-9

TE Connectivity

RT315110 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form C SPDT-CO Contact Current Rating: 16 A General Purpose Power Relay DC Monostable 1 Form C SPDT-CO | Electromechanical Relay | Part Number: 1-1393240-9 | Internal Number: 1-1393240-9 | Alias Number: RT315110 | TE Connectivity
RoHS : Compliant

500 : $29.36
250 : $30.37
100 : $31.39
50 : $32.4
25 : $33.42
10 : $34.43
1 : $35.44

1,498

RN222-4-02-3M3

TE Connectivity

RN222-4-02-3M3 Operating Voltage (Max): 300 VDC Current Rating (Max): 4 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 4 A PCB Terminal PD2 | Part Number: RN222-4-02-3M3 | Internal Number: 816569-SF | TE Connectivity
RoHS : Compliant

10 : $5.91
1 : $6.54

1,456

CPF0805B240KE1

TE Connectivity

CPF 0805 240K 0.1% 25PPM 1K RL Resistance Value: 240K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 240K Ω Thin Film Precision Resistor .1 % | Part Number: CPF0805B240KE1 | Internal Number: 1-1614885-3 | TE Connectivity
RoHS : Compliant

500 : $0.32
250 : $0.33
100 : $0.34
50 : $0.35
25 : $0.36
10 : $0.37
1 : $0.38

1,002

8-324075-1

TE Connectivity

TERMINAL,PIDG R 26-22 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 26 – 22 AWG Wire Size: .129 – .326 mm² Wire Size: 202 – 810 CMA Stud Size: #10 Closed Ring Tongue Terminal 26 – 22 AWG .129 – .326 mm² 202 – 810 CMA | Pidg Ring Tongue Terminal | Part Number: 8-324075-1 | Internal Number: 8-324075-1 | TE Connectivity
RoHS : Compliant

500 : $1.64
250 : $1.7
100 : $1.76
50 : $1.81
25 : $1.87
10 : $1.93
1 : $1.98

708

382A012-4-0

TE Connectivity

382A012-4-0 Molded Part Shape: Y Shape Number of Branches: 3 Material Code: 4 Material Systems Code: 10 Adhesive Requirement: Adhesive Purchased Separately Y Shape 3 4 10 | Heat Shrinkable Cable Breakout And Cable Transition | Part Number: 382A012-4-0 | Internal Number: 823748-000 | Alias Number: 2-1196432-6 | TE Connectivity
RoHS : Compliant

1 : $27.69

254

KRPA-11AY-240

TE Connectivity

KRPA-11AY-240=KRPA Relay & Contactor Type: General Purpose Power Relay Current Type: AC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 10 A General Purpose Power Relay AC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: KRPA-11AY-240 | Internal Number: 3-1393104-8 | TE Connectivity
RoHS : Compliant

100 : $93.67
50 : $98.12
25 : $102.6
10 : $107.05
1 : $111.52

149

KUP-14A15-240

TE Connectivity

KUP-14A15-240=KU Relay & Contactor Type: General Purpose Power Relay Current Type: AC Coil Magnetic System: Monostable Contact Arrangement: 3 Form C 3PDT-CO Contact Current Rating: 10 A General Purpose Power Relay AC Monostable 3 Form C 3PDT-CO | Electromechanical Relay | Part Number: KUP-14A15-240 | Internal Number: 8-1393117-0 | TE Connectivity
RoHS : Compliant

100 : $70.56
50 : $73.93
25 : $77.29
10 : $80.65
1 : $84.01

103

T1240240132-000

TE Connectivity

H24B-TGH-M32 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1240240132-000 | Internal Number: T1240240132-000 | TE Connectivity
RoHS : Compliant

25 : $22.9
10 : $24.66
1 : $26.42

T1240240221-100

TE Connectivity

H24B-TGH-2PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1240240221-100 | Internal Number: T1240240221-100 | TE Connectivity
RoHS : Compliant

25 : $25.19
10 : $27.13
1 : $29.07

T1240240129-000

TE Connectivity

H24B-TGH-PG29 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1240240129-000 | Internal Number: T1240240129-000 | TE Connectivity
RoHS : Compliant

25 : $22.9
10 : $24.66
1 : $26.42

1-2405080-0

TE Connectivity

75 AHV D BS Ahv | Part Number: 1-2405080-0 | Internal Number: 1-2405080-0 | TE Connectivity
RoHS : Compliant

1 : $1,683.65

1-2432409-3

TE Connectivity

RPQ-3-18 Part Number: 1-2432409-3 | Internal Number: 1-2432409-3 | TE Connectivity
RoHS : Compliant

1 : $448.39

T1240240221-000

TE Connectivity

H24B-TGH-2PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1240240221-000 | Internal Number: T1240240221-000 | TE Connectivity
RoHS : Compliant

25 : $25.19
10 : $27.13
1 : $29.07

Teledyne HiRel

7902402LA

Teledyne HiRel

PROM, POWER-SWITCHED, 1K X 8, 75 NS ACCESS TIME

5962-8972401RA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

54ACQ240LMQB

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS

M38510/32401B2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-88724033A

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR
RoHS : Not Compliant

5962-8762401CA

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

54ACTQ16240FMQB

Teledyne HiRel

16-BIT INVERTING BUFFER/LINE DRIVER WITH TRI-STATE OUTPUTS

5962-8872404LA

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR
RoHS : Not Compliant

DM54LS240E/883

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS

7702401DA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-88724023A

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR
RoHS : Not Compliant

5962-89724012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8762401DA

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

M38510/32401BSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

7902402KA

Teledyne HiRel

PROM, POWER-SWITCHED, 1K X 8, 75 NS ACCESS TIME

Venkel Ltd.

PWCR0603-UL-240JT

VENKEL LTD

Pulse Withstanding CR;0603;1/3W;�200PPM;24R;�5%
RoHS : Compliant

PWCR2512-ZK-2401DT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;2.4K;�0.5%
RoHS : Compliant

AGCR0603-TK-2402DT

VENKEL LTD

Auto Grade Resistor;0603;1/4W;�100PPM;24K;�0.5%
RoHS : Compliant

AGCR0603-TK-240JT

VENKEL LTD

Auto Grade Resistor;0603;1/4W;�100PPM;24R;�5%
RoHS : Compliant

AGCR1206-TK-240JT

VENKEL LTD

Auto Grade Resistor;1206;1/4W;�100PPM;24R;�5%
RoHS : Compliant

AGCR2512-XK-2403FT

VENKEL LTD

Auto Grade Resistor;2512;1W;�100PPM;240K;�1%
RoHS : Compliant

AGTF0402-PE-2400DT

VENKEL LTD

Auto Grade Thin Film;0402;1/16W;�25PPM;240R;�0.5%
RoHS : Compliant

HVCR1206-4W-2403FT

VENKEL LTD

High Voltage CR;1206;1/4W;240K;�1%
RoHS : Compliant

HPTF0603-QC-2400AT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�50PPM;240R;�0.05%
RoHS : Compliant

HPTF0603-QP-2401CT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;2.4K;�0.25%
RoHS : Compliant

HPTF0603-QP-3240AT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;324R;�0.05%
RoHS : Compliant

HPTF1206-TC-3240AT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�50PPM;324R;�0.05%
RoHS : Compliant

HPTF1206-TN-2400UT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�10PPM;240R;�0.01%
RoHS : Compliant

HPTF1206-UE-1240DT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;124R;�0.5%
RoHS : Compliant

HPTF1206-UE-2403BT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;240K;�0.1%
RoHS : Compliant

Waytek, Inc.

282403-1

TE Connectivity

22-20GA Female Socket Reel AMP SuperSeal 1.5 4000/Reel
RoHS : Compliant

4,000 : $0.0651
20,000 : $0.0622

20,000

282403-1

TE Connectivity

22-20GA Female Socket Loose AMP SuperSeal 1.5
RoHS : Compliant

20 : $0.1989
50 : $0.1805
100 : $0.1655
200 : $0.1512
500 : $0.1416
1,000 : $0.1362

12,433

10240

Hillsdale Terminal & Tool Inc

Uninsulated Ring Terminal 12-10 Gauge, 1/4" Stud

50 : $0.1605
200 : $0.1455
500 : $0.1302
1,000 : $0.118
5,000 : $0.1125

9,466

50240

Hillsdale Terminal & Tool Inc

Vinyl Ring Terminal 12-10 Gauge 1/4" Stud

50 : $0.1773
200 : $0.1608
500 : $0.1437
1,000 : $0.1303
5,000 : $0.1242

4,948

986332400

The Bosch Group

Mini Relay, Change Over, 5-Pin SPDT, 30NO, 20NC, 12VDC w/Bracket | Like 75411

1 : $4.9331
5 : $4.4459
10 : $4.0805
50 : $3.9384
100 : $3.8166
200 : $3.6948

2,637

15324063

Aptiv PLC

Male TPA Metri-Pack 280 Series Connector 4 Contact

25 : $0.4647
50 : $0.416
100 : $0.3772
200 : $0.3637
500 : $0.352
1,000 : $0.3385

1,611

55812406

Southwire Company LLC

12/4 SJOOW Service Cord Blk Wht Grn Rd Conductors -40C to 90C UL/CSA 300V

250 : $2.2205
2,500 : $1.9413

1,500

AHDP02-24-07PN-SRA

Amphenol Sine Systems

Amphenol Sine Systems AHDP02-24-07PN-SRA DuraMate AHDP sealed panel-mount receptacle is a shell size 24, 7-position pin circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation.

1 : $7.09
10 : $6.98
50 : $6.91
100 : $6.69
200 : $6.53
500 : $6.47

399

AHDP04-24-07PN-SRA

Amphenol Sine Systems

Amphenol Sine Systems AHDP04-24-07PN-SRA DuraMate AHDP receptacle is a shell size 24, 7-position pin circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation.

1 : $6.74
10 : $6.54
50 : $6.35
100 : $6.15
200 : $6.0
500 : $5.85

344

24037

Cole Hersee

Solenoid Intermittent Duty 12V SPST GRND MR750A/ BR100A

1 : $56.3
5 : $50.27
10 : $46.91
20 : $45.88
50 : $44.23
100 : $42.22

121

AHDP06-24-07SN-SRACL

Amphenol Sine Systems

Amphenol Sine Systems AHDP06-24-07SN-SRACL22 DuraMate AHDP plug is a shell size 24, 7-position socket circular connector with normal diameter seal and smooth ring adapter CL22 variant. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation.

1 : $13.73
5 : $13.31
10 : $12.75
50 : $11.89
100 : $11.58
200 : $11.15

24047

Cole Hersee

Solenoid Intermittent Duty 12V INSL SPST MR750A/ BR100A

1 : $56.8
5 : $54.64
10 : $52.96
20 : $50.3
50 : $48.38
100 : $46.69

2401B

Egis Mobile Electric

E-Series 350A Battery Selector Switch Off/1/Both/2, Bulk Pack

1 : $24.0083
5 : $22.3277
10 : $20.9863
25 : $20.1468
50 : $19.811

2403B

Egis Mobile Electric

E-Series 350A Battery Switch Off/On, Bulk Pack

1 : $25.6285
5 : $23.8363
10 : $22.4025
25 : $21.5064
50 : $21.148

R624 0003

Rennsteig Tools Inc

Delphi Hand Crimp Tool with Case - No Dies CRIMP DIES NOT INCLUDED

1 : $238.06
10 : $223.39

Win Source Electronics

DT1240A-08LP3810Q-7

Diodes Incorporated

DATALINE PROTECTION PP U-DFN3810
RoHS : Compliant

1,060 : $0.2834
795 : $0.3161
615 : $0.327
445 : $0.3379
290 : $0.3488
120 : $0.425

191,787

MBRS240LT3G

onsemi

DIODE SCHOTTKY 40V 2A SMB
RoHS : Compliant

2,300 : $0.1305
1,845 : $0.1358
1,420 : $0.1411
990 : $0.1517
640 : $0.157
300 : $0.1676

183,430

BQ24040DSQR/BQ24040DSQT

Texas Instruments

1,910 : $0.1573
1,530 : $0.1637
1,180 : $0.17
825 : $0.1828
530 : $0.1892
250 : $0.202

55,230

BQ24074RGTR/BQ24074RGTT

Texas Instruments

275 : $1.1098
220 : $1.1549
170 : $1.2
120 : $1.2903
75 : $1.3354
40 : $1.4256

45,950

SCT2401TVBR

SCT

1.2MHz Step-down type Adjustable 600mA TSOT-23-6L Voltage Regulators - DC DC Switching Regulators RoHS

1,980 : $0.1518
1,480 : $0.1693
1,145 : $0.1751
830 : $0.1809
540 : $0.1868
220 : $0.2276

30,000

ISO7240CDWR

Texas Instruments

Digital Isolator CMOS 4-CH 25Mbps 16-Pin SOIC T/R / DGTL ISO 2.5KV GEN PURP 16SOIC
RoHS : Compliant

295 : $1.0209
220 : $1.1387
170 : $1.178
125 : $1.2172
80 : $1.2565
35 : $1.5313

27,450

ADUM1240ARZ-RL7

Analog Devices Inc

Micropower, Dual-Channel Digital Isolators | DGTL ISO 3KV 2CH GEN PURP 8SOIC
RoHS : Compliant

40 : $7.542
30 : $8.4123
23 : $8.7023
17 : $8.9924
11 : $9.2825
5 : $11.313

18,160

ABM3B-24.000MHZ-B2-T

Abracon Corporation

CRYSTAL 24.0000MHZ 18PF SMD / 24 MHz ±20ppm Crystal 18pF 50 Ohms 4-SMD, No Lead

770 : $0.4379
575 : $0.4884
445 : $0.5053
325 : $0.5221
210 : $0.5391
90 : $0.6569

12,220

ISO7240MDW

Texas Instruments

DGTL ISO 2.5KV GEN PURP 16SOIC
RoHS : Compliant

68 : $4.4728
54 : $4.6546
42 : $4.8364
29 : $5.2001
19 : $5.3819
9 : $5.7455

12,000

LCMXO2-4000HC-5FTG256I

Lattice Semiconductor Corporation

IC FPGA 206 I/O 256FTBGA / MachXO2 Field Programmable Gate Array (FPGA) IC 206 94208 4320 256-LBGA
RoHS : Compliant

12 : $25.8016
9 : $28.7787
7 : $29.771
5 : $30.7634
4 : $31.7558
2 : $38.7023

7,200

MAX24025IMP+T

Maxim Integrated Products

Quad 25GBPS Laser Driver With Cd

5 : $63.5115
4 : $70.8397
3 : $73.2825
2 : $75.7252
1 : $78.168

1,860

N25Q256A13E1240E

Micron Technology Inc

Micron Serial NOR Flash Memory 3V, Multiple I/O, 4KB Sector Erase N25Q256A | IC FLASH 256M SPI 24TPBGA / NOR Flash Serial (SPI, Dual SPI, Quad SPI) 3V/3.3V 256M-bit 32M x 4-bit 8ns 24-Pin TFBGA Tray
RoHS : Compliant

11 : $32.3556
8 : $36.089
6 : $37.3334
5 : $38.5778
3 : $39.8223
2 : $48.5334

1,300

EP2C20Q240C8N

Altera Corporation

IC FPGA 142 I/O 240QFP
RoHS : Compliant

3 : $137.8788
2 : $153.7879
1 : $159.091

1,110

ADUM2400BRWZ-RL

Analog Devices Inc

DGTL ISO 5KV 4CH GEN PURP 16SOIC / Digital Isolator CMOS 4-CH 10Mbps 16-Pin SOIC W T/R
RoHS : Compliant

26 : $11.8182
19 : $13.1819
15 : $13.6364
11 : $14.091
7 : $14.5455
3 : $17.7273

1,050