2028FCG-R Price, дистрибьютор, Stock

Cable Assembly Discrete Wire 0.102m 40 POS Discrete Wire Housing to 40 POS Discrete Wire Housing RCP-RCP (Alt: SFSDT-20-28-H-04.00-DR-NDX)
RoHS : Compliant

0432028916

Molex

(Alt: 0432028916)
RoHS : Compliant

Braemac Americas-Symmetry

3990252028

Telit

ME310G1-WWV INTERFACE TLB

1 : $171.5

EBV Elektronik

62028-002-XTD

onsemi

Multifunction vehicle bus controller (Alt: 62028-002-XTD)
RoHS : Compliant

NCS20282FCTTAG

onsemi

7 MHz Dual Operational Amplifier with Enable in CSP (Alt: NCS20282FCTTAG)
RoHS : Not Compliant

SA50-120-28S-A-H

Microchip Technology Inc

(Alt: SA50-120-28S-A-H)
RoHS : Not Compliant

SGM2028-ADJYN5G/TR

SG Micro Corp

(Alt: SGM2028-ADJYN5G/TR)
RoHS : Compliant

NCP156ABFCT120280T2G

onsemi

LDO Regulator 500 mA250 mA Dual Output UltraLow Dropout Low Iq UltraLow Noise ONSSPCLDO (Alt: NCP156ABFCT120280T2G)
RoHS : Compliant

ISA220280C03LMDSXTMA1

Infineon Technologies AG

Dual MOSFET Complementary N and P Channel 30 V 30 V 84 A 81 A 0022 ohm (Alt: SP005904287)
RoHS : Compliant

FJ8071504742028S RMDQ

Intel Corporation

Microprocessor 8 Cores 64bit Core i3 38 GHz FCBGA 1264 Pins (Alt: 99C62M)
RoHS : Compliant

L20283_STRADA-2X2R-FN

LEDIL

REFLECTORRECTANG4 POS500MM D1122 (Alt: L20283_STRADA-2X2R-FN)
RoHS : Compliant

ECCO

M83723/75W2028N-LC

Aero-Electric Connector Inc

RoHS : Not Compliant

104

AE83376W2028N

Aero-Electric Connector Inc

RoHS : Not Compliant

M83723/72W2028N

Aero-Electric Connector Inc

RoHS : Not Compliant

1 : $67.0

AE83372W2028N

Aero-Electric Connector Inc

RoHS : Not Compliant

Flip Electronics

NCP156AAFCT120280T2G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.11

69,600

NCP156ABFCT120280T2G

onsemi

Stock, Ship Today
RoHS : Compliant

5,000

Master Electronics

TFSD-20-28-H-20.28-S

Samtec Inc

RoHS : Compliant

250 : $23.89
100 : $25.21
50 : $33.14
25 : $35.06
10 : $37.12
5 : $37.22
1 : $41.71

121647-2028-A

ITT Interconnect Solutions

Circular Connector - Cable Mount - Contact Arangement: 20-48 - Pins - Bayonet Coupling - Endbell w/Cable Clamp
RoHS : Compliant

100 : $52.26
75 : $53.33
50 : $75.78
25 : $143.14

249-2028-007

ITT Interconnect Solutions

SHL ASM PV70*16-06 / 249-2028-007 / Circular
RoHS : Compliant

50 : $392.85
38 : $400.87
25 : $596.75
13 : $1,123.44

115336-2028

ITT Interconnect Solutions

KPSE0E2221P-DX; MIL-DTL 26482 Series I & Mil Batte
RoHS : Not Compliant

50 : $74.14
38 : $75.65
25 : $108.94
13 : $197.85

5-1532028-6

TE Connectivity

628-9010-0001=ESP-R-010-S5-0- MOQ Reduction
RoHS : Compliant

100 : $40.33
75 : $41.15
50 : $58.48
25 : $110.45

43202-8824

Molex

Conn RJ-45 F 8 POS 2.54mm Solder RA Thru-Hole 8 Terminal 1 Port Tray Cat 3
RoHS : Compliant

6,000 : $3.03
3,000 : $3.21
1,200 : $3.32
560 : $3.79
280 : $3.98
140 : $4.21
20 : $4.47

RT062028PNHEC03R

Amphenol Sine Systems

Plug 28 Position Male Shell Size 20 Silicone Seal and End Cap with Reduced Diameter Individual Wire Sealing Range 14 - 24AWG
RoHS : Compliant

50 : $25.71
38 : $26.24
25 : $33.58
13 : $52.48

S1SD-20-28-GF-01.80-L1

Samtec Inc

MICRO MATE DOUBLE ROW DI
RoHS : Compliant

500 : $9.71
250 : $10.97
100 : $11.78
50 : $15.83
25 : $16.3
10 : $16.8
5 : $17.62

S1SD-20-28-GF-05.57-L1

Samtec Inc

RoHS : Compliant

500 : $10.65
250 : $12.03
100 : $12.91
50 : $17.36
25 : $17.88
10 : $18.43
5 : $19.32

S1SD-20-28-GF-06.36-L1

Samtec Inc

RoHS : Compliant

500 : $11.07
250 : $12.51
100 : $13.41
50 : $18.03
25 : $18.57
10 : $19.14
5 : $20.06

S1SD-20-28-GF-12.00-L1

Samtec Inc

MICRO MATE DOUBLE ROW DI
RoHS : Compliant

250 : $17.27
100 : $18.27
50 : $25.23
25 : $26.36
10 : $27.17
5 : $28.49
1 : $30.45

S1SD-20-28-GF-20.00-L

Samtec Inc

MICRO MATE DOUBLE ROW DI
RoHS : Compliant

250 : $20.06
100 : $21.22
50 : $28.1
25 : $29.73
10 : $31.48
5 : $31.56
1 : $35.37

S1SD-20-28-GF-36.00-L1

Samtec Inc

MICRO MATE DOUBLE ROW DI
RoHS : Compliant

250 : $32.35
100 : $33.75
50 : $45.92
25 : $47.88
10 : $50.03
5 : $51.57
1 : $57.79

S1SD-20-28-GF-36.82-L1

Samtec Inc

RoHS : Compliant

250 : $29.34
100 : $31.45
50 : $41.66
25 : $43.44
10 : $45.39
5 : $46.78
1 : $52.43

S1SD-20-28-GF-49.80-L1

Samtec Inc

RoHS : Compliant

250 : $36.74
100 : $38.32
50 : $52.15
25 : $54.39
10 : $56.82
5 : $58.57
1 : $65.64

Pasternack Enterprises US

PE88X2028

Pasternack Enterprises

Key Specifications, Input Frequency, Min: 11.5 MHz, Input Frequency, Max: 16.5 MHz, Output Frequency, Min: 23 MHz, Output Frequency, Max: 33 MHz, Input VSWR, Max: 2, Output VSWR, MAX: 2.2. Active 2x Frequency Multiplier, 23 to 33 GHz Output Frequency, +10 dBm Output Power, 2.92mm Female. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2028 from Pasternack has SMA/2.92mm conectors and are 50 Ohm. Our SMA/2.92mm frequency multiplier is manufactured for a minimum frequency input of 11.5 MHz and a maximum frequency input of 16.5 MHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 23 MHz and output maximum frequency of 33 MHz. Our active 2x frequency multiplier can operate at temperatures ranging from -40° to 85° deg C and has a maximum VSWR of 2:1. Make your online purchase right now to take advantage of our same-day shipping. This active 2x frequency multiplier is powered by DC voltage ranging from 9 to 15 Vdc with 125 mA of DC current. Our 50 Ohm frequency multiplier has an input threaded SMA female connector and output 2.92mm female connector. This active frequency multiplier is suitable for Aerospace & Defense, Test & Measurement, Microwave Radio Systems, Military & Commercial Communication Systems, Research & Development, SATCOM and Wireless Communications applications. Our SMA female multiplier comes with a 50 Ohm impedance and a max input power rating (CW) of 6 dBm. The active 2x frequency multiplier has a typical fundamental isolation of 20 dB. Our active 2x frequency multiplier has a storage temperature ranging from -55° to 105° deg C. Our active 2x frequency multiplier has a typical phase noise of -132 dBc/Hz at 100kHz offset. This 6 dBm active frequency multiplier has an overall length of 1.25 inches, a width of 1.25 inches, and a weight of 0.085 lbs. Our active 2x frequency multiplier has a typical conversion gain of 12.00 dB. Additional dimensions and specifications for this active 2x frequency multiplier are on our downloadable PDF datasheet above. SMA frequency doubler / multiplier PE88X2028 from Pasternack is rated for a 6 dBm and is just one part of over 40,000 RF, microwave, and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock. Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts.For further information on similar products, our expert technical support and trained sales team can get you to the ideal active 2x frequency multiplier as per your requirements.

1 : $1,650.0
5 : $1,584.0
10 : $1,518.0
25 : $1,452.0

PE3W20289/HS-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Slide-On BMA Jack 2 Hole Flange to MCX Jack Cable 72 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20289/HS-72 BMA jack 2 hole flange to MCX jack RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to MCX jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA 2 hole flange cable connection on one end and a MCX cable connection on the other. Our BMA to MCX cable assembly has a jack gender on end 1 and a jack on end 2. PE3W20289/HS-72 can also be known as a BMA female to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20289/HS-72 RF cable has an FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This PE3W20289/HS-72 BMA female to MCX female cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 72-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20289/HS-72 can also be used in the other direction and will be a MCX jack to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. This BMA female 2 hole flange to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to MCX cable assembly for quick shipment worldwide. Variations of BMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to MCX RF cable assembly as per your requirements.

1 : $171.94
10 : $165.06
25 : $158.18
100 : $151.31

PE3W20286/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SSMB Plug to SMA Male Cable Using LMR-100A-UF Coax with HeatShrink. PE3W20286/HS is a SSMB plug to SMA male cable using LMR-100A-UF coax. This Pasternack SSMB plug to SMA male cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SMA for connector 2. Our plug SSMB to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20286/HS SSMB plug to SMA male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C2028

Pasternack Enterprises

PE3W22028

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Female Cable Using LMR-100A-UF Coax. PE3W22028 is a reverse polarity SMA male to N female cable using LMR-100A-UF coax. This Pasternack reverse polarity SMA male to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22028 SMA reverse polarity male to N female cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20285

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to BNC Male Cable Using RG174 Coax. PE3W20285 is a SHV jack bulkhead to BNC male cable using RG174 coax. This Pasternack SHV jack bulkhead to BNC male cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm BNC for connector 2. Our jack SHV bulkhead to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20285 SHV jack bulkhead to BNC male cable assembly is constructed with RG174 coax.

PE3W20289/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Slide-On BMA Jack 2 Hole Flange to MCX Jack Cable 12 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20289/HS-12 BMA jack 2 hole flange to MCX jack RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to MCX jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA 2 hole flange cable connection on one end and a MCX cable connection on the other. Our BMA to MCX cable assembly has a jack gender on end 1 and a jack on end 2. PE3W20289/HS-12 can also be known as a BMA female to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20289/HS-12 RF cable has an FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This PE3W20289/HS-12 BMA female to MCX female cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20289/HS-12 can also be used in the other direction and will be a MCX jack to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. This BMA female 2 hole flange to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to MCX cable assembly for quick shipment worldwide. Variations of BMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to MCX RF cable assembly as per your requirements.

1 : $145.99
10 : $140.15
25 : $134.31
100 : $128.47

PE3W20288

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MCX Jack to Slide-On BMA Plug Bulkhead Cable Using RG178 Coax. PE3W20288 is a MCX jack to BMA plug bulkhead cable using RG178 coax. This Pasternack MCX jack to BMA plug bulkhead cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BMA for connector 2. Our jack MCX to plug BMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20288 MCX jack to BMA plug bulkhead cable assembly is constructed with RG178 coax.

PE3W20280

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Cable Using TCOM-240-FR Coax. PE3W20280 is a SMA male to SMA female cable using TCOM-240-FR coax. This Pasternack SMA male to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20280 SMA male to SMA female cable assembly is constructed with TCOM-240-FR coax.

PE3W20283

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using LMR-100-FR Coax. PE3W20283 is a SMA male to SMA male right angle cable using LMR-100A-FR coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20283 SMA male to SMA male right angle cable assembly is constructed with LMR-100A-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20287/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SSMB Jack Bulkhead to SMA Female Cable Using RG188-DS Coax with HeatShrink. PE3W20287/HS is a SSMB jack bulkhead to SMA female cable using RG188-DS coax. This Pasternack SSMB jack bulkhead to SMA female cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SMA for connector 2. Our jack SSMB bulkhead to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20287/HS SSMB jack bulkhead to SMA female cable assembly is constructed with RG188-DS coax.

PE3W20289

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to MCX Jack Cable Using RG316 Coax. PE3W20289 is a BMA jack 2 hole flange to MCX jack cable using RG316 coax. This Pasternack BMA jack 2 hole flange to MCX jack cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm MCX for connector 2. Our jack BMA 2 hole flange to jack MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20289 BMA jack 2 hole flange to MCX jack cable assembly is constructed with RG316 coax.

PE3W20289/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Slide-On BMA Jack 2 Hole Flange to MCX Jack Cable 36 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20289/HS-36 BMA jack 2 hole flange to MCX jack RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to MCX jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA 2 hole flange cable connection on one end and a MCX cable connection on the other. Our BMA to MCX cable assembly has a jack gender on end 1 and a jack on end 2. PE3W20289/HS-36 can also be known as a BMA female to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20289/HS-36 RF cable has an FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This PE3W20289/HS-36 BMA female to MCX female cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20289/HS-36 can also be used in the other direction and will be a MCX jack to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. This BMA female 2 hole flange to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to MCX cable assembly for quick shipment worldwide. Variations of BMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to MCX RF cable assembly as per your requirements.

1 : $156.37
10 : $150.12
25 : $143.86
100 : $137.61

PE3W02028

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Reverse Polarity N Male Cable Using RG58 Coax. PE3W02028 is a SMA male right angle to reverse polarity N male cable using RG58 coax. This Pasternack SMA male right angle to reverse polarity N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to reverse polarity male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02028 SMA male right angle to N reverse polarity male cable assembly is constructed with RG58 coax.

PE3W20289/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Slide-On BMA Jack 2 Hole Flange to MCX Jack Cable 48 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20289/HS-48 BMA jack 2 hole flange to MCX jack RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to MCX jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA 2 hole flange cable connection on one end and a MCX cable connection on the other. Our BMA to MCX cable assembly has a jack gender on end 1 and a jack on end 2. PE3W20289/HS-48 can also be known as a BMA female to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20289/HS-48 RF cable has an FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This PE3W20289/HS-48 BMA female to MCX female cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 48-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20289/HS-48 can also be used in the other direction and will be a MCX jack to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. This BMA female 2 hole flange to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to MCX cable assembly for quick shipment worldwide. Variations of BMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to MCX RF cable assembly as per your requirements.

1 : $161.56
10 : $155.1
25 : $148.64
100 : $142.17