| поискавой системы для электроныых деталей |
|
176HG-S08-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() Coilcraft Direct | PFL4517-681MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-f RoHS : Compliant |
| 1,408 | |
| YA9176-CED | Coilcraft Inc | Flyback Transformer, for Maxim Integrated MAX17690, isolation, SMT, RoHS RoHS : Compliant |
| 700 | ||
| RFS1317-683KL | Coilcraft Inc | Power inductor, shielded, 10% tol, RoHS RoHS : Compliant |
| 472 | ||
| RFS1317-685KL | Coilcraft Inc | Power inductor, shielded, 10% tol, RoHS RoHS : Compliant |
| 186 | ||
| D1766-ALD | Coilcraft Inc | PoE transformer, for LTC4267, SMT, RoHS RoHS : Compliant |
| 132 | ||
| RFS1317-684KL | Coilcraft Inc | Power inductor, shielded, 10% tol, RoHS RoHS : Compliant |
| 107 | ||
| CMT1-1.7-6L | Coilcraft Inc | Common mode choke, toroid, RoHS RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | MAXM17625AMB+T | Analog Devices Inc | RoHS : Compliant | 137,014 | ||
| MAX17626ATA+T | Analog Devices Inc | RoHS : Compliant | 17,499 | |||
| MAX17644BATE+T | Analog Devices Inc | RoHS : Compliant | 14,909 | |||
| MAX17681ATB+T | Analog Devices Inc | 1A, 42V,Iso-Buck Regulator RoHS : Compliant | 11,664 | |||
| MAXM17630AME+ | Analog Devices Inc | RoHS : Compliant | 5,015 | |||
| MAX1765EEE+ | Analog Devices Inc | 800mA, Low-Noise, Step-Up DC-DC Converter with 500mA Linear Regulator RoHS : Compliant | 4,250 | |||
| MAX17631BATE+ | Analog Devices Inc | RoHS : Compliant | 4,141 | |||
| MAX1761EEE+ | Analog Devices Inc | Small, Dual, High-Efficiency Buck Controller for Notebooks RoHS : Compliant | 3,236 | |||
| MAX17624ATA+T | Analog Devices Inc | RoHS : Compliant | 2,499 | |||
| MAX17632CATE+T | Analog Devices Inc | 36V, 2A, HIGH-EFFICIENCY, SYNCHR RoHS : Compliant | 2,487 | |||
| MAX17631CATE+T | Analog Devices Inc | RoHS : Compliant | 1,404 | |||
| MAX17601AUA+ | Analog Devices Inc | 4A Sink/Source Current, 12ns, Dual MOSFET Drivers RoHS : Compliant | 1,106 | |||
| MAX17620ATA+T | Analog Devices Inc | 5.5V, 600mA Synchronous Step-Down Regulator RoHS : Compliant | 815 | |||
| LT1764AET#30PBF | Analog Devices Inc | IC REG LDO ADJ 3A TO220-5 RoHS : Compliant | 199 | |||
| XC5VLX330-2FF1760C | AMD Xilinx | RoHS : Not Compliant | 19 | |||
![]() ComSIT USA | LT1761ES5BYPTRPBF | Analog Devices Inc | AVAILABLE EU | 683 | ||
| 1001769 | ACURAY | AVAILABLE EU | 711 | |||
| LT1761ES5SDTRPBF | Analog Devices Inc | AVAILABLE EU | 1,812 | |||
| 1001760 | ACURAY | AVAILABLE EU | 51 | |||
| ACR10417661LF | BEICHI | AVAILABLE EU | 2 | |||
| 3775191REVECO17661 | BILINK | AVAILABLE EU | 509 | |||
| 621763980 | TE Connectivity | AVAILABLE EU | 4,370 | |||
| SN75176BDR | TEXAS INSTRUMENTS INC | AVAILABLE EU | 29,999 | |||
| P62176802 | NEFAB | AVAILABLE EU | 309 | |||
![]() GLYN GmbH & Co. KG | TLP176AM(V4TPL,E(T | Toshiba America Electronic Components | SO6 3000 | 3,000 | ||
![]() PEI Genesis | 20176.6 | CONTA-CLIP Inc |
| 0 | ||
| 85176RU128SY52B | SOURIAU-SUNBANK |
| 0 | |||
| ACA3102E18-19SBF80A176A232 | Amphenol Corporation |
| 0 | |||
| 5617635-120 | SOURIAU-SUNBANK |
| 0 | |||
| 5617635-1400 | SOURIAU-SUNBANK |
| 0 | |||
| 5617635-201 | SOURIAU-SUNBANK |
| 0 | |||
| 5617635-238 | SOURIAU-SUNBANK |
| 0 | |||
| 5617635-445 | SOURIAU-SUNBANK |
| 0 | |||
| 5617635-571 | SOURIAU-SUNBANK |
| 0 | |||
| 5617635-61 | SOURIAU-SUNBANK |
| 0 | |||
| 5617636-33 | SOURIAU-SUNBANK |
| 0 | |||
| 5617636-741 | SOURIAU-SUNBANK |
| 0 | |||
| 711-1760-1-11 | Amphenol Corporation |
| 0 | |||
| CA02COME28-21PBF80A176 | ITT Interconnect Solutions |
| 0 | |||
| CA06COME10SL-3SB01A176 | ITT Interconnect Solutions |
| 0 | |||
![]() Powell Electronics | 2176117-6 | TE Connectivity | Resistors RoHS : Compliant |
| 23,120 | |
5-2176217-6![]() | TE Connectivity | TE COMPONENT (REF 5-2176217-6) RoHS : Compliant |
| 4,620 | ||
2-2176217-6![]() | TE Connectivity | Resistors RoHS : Compliant |
| 3,300 | ||
| 9-2176307-5 | TE Connectivity | TE COMPONENT (REF 9-2176307-5) RoHS : Compliant |
| 3,300 | ||
| 2-2176350-2 | TE Connectivity | Switches RoHS : Compliant |
| 2,640 | ||
| 5-1761185-1 | TE Connectivity | Modular Connectors / Ethernet Connectors RoHS : Compliant |
| 2,557 | ||
9-2176092-4![]() | TE Connectivity | Resistors RoHS : Compliant |
| 1,980 | ||
5-2176093-0![]() | TE Connectivity | Resistors RoHS : Compliant |
| 1,320 | ||
2-2176094-7![]() | TE Connectivity | Resistors RoHS : Compliant |
| 660 | ||
| 5-1761613-5 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 105 | ||
| 5-1768047-5 | TE Connectivity | Connectors RoHS : Compliant |
| 66 | ||
| 1-917657-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 5 | ||
| 2-1761608-9 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1 | ||
| 20017625-00 | TE Connectivity | SENSOR (TE REF 20017625-00) |
| 1 | ||
| 9-189717-6 | TE Connectivity | ANVIL, COMBINATION |
| 1 | ||
![]() PUI | 12.95176 | 4,015 | ||||
| 8936-L143176N21CD06SB | Oupiin | RoHS : Compliant | 1,070 | |||
| MR176 | 4 | |||||
![]() Richardson RFPD | 2301761760609PJ | Radiall | RF CUSTOM CABLE ASSY RoHS : Not Compliant | 0 | ||
| R123W176000W | Radiall | Conn QMA 0Hz to 6GHz 50Ohm Crimp RA Cable Mount PL RoHS : Compliant | 0 | |||
| PSEP217647A0 | Wall Industries Inc | AC/DC Open Frame Power Supply RoHS : Compliant | 0 | |||
| 095-909-176M025 | Amphenol Corporation | Cable Assembly LMR-240 0.25m Type N to Type N PL-P RoHS : Compliant |
| 0 | ||
| 1-2176308-8 | TE Connectivity | Res Thin Film 0402 200K Ohm 0.1% 0.1W(1/10W) ±25pp RoHS : Compliant | 0 | |||
| 20017612-31 | TE Connectivity | Liquid Level Sensor RoHS : Not Compliant | 0 | |||
| 9-2176307-5 | TE Connectivity | Res Thin Film 0402 118K Ohm 0.1% 0.1W(1/10W) ±25pp RoHS : Compliant | 0 | |||
| ADP1763ACPZ-1.0-R7 | Analog Devices Inc | LDO Regulator Pos 1V 3A Medical 16-Pin LFCSP EP T/ RoHS : Compliant |
| 0 | ||
| 85117680 | HUBER+SUHNER | 85117680 RoHS : Compliant | 0 | |||
| 7-2176280-2 | TE Connectivity | Res Thin Film 0402 287K Ohm 0.1% 0.063W(1/16W) ±25 RoHS : Compliant | 0 | |||
| ADP1762-1.3-EVALZ | Analog Devices Inc | ADP1762ACPZ-1.3-R7 Linear Regulator 1.3VDC Output RoHS : Compliant |
| 0 | ||
| ADP1762ACPZ-0.9-R7 | Analog Devices Inc | LDO Regulator Pos 0.9V 2A 16-Pin LFCSP EP T/R RoHS : Compliant |
| 0 | ||
| ADP1763WACPZ-1.0-R7 | Analog Devices Inc | LDO Regulator Pos 1V 3A Automotive 16-Pin LFCSP EP RoHS : Compliant |
| 0 | ||
| ADP1764ACPZ0.95-R7 | Analog Devices Inc | LDO Regulator Pos 0.95V 4A 16-Pin LFCSP EP T/R RoHS : Compliant |
| 0 | ||
| SI32176-B-FM1R | Skyworks Solutions Inc | IC PROSLIC FXS DC-DC -110V 42QFN RoHS : Compliant |
| 0 | ||
![]() Rutronik | 709176001511006 | Kyocera AVX Components | 01P IDC Connector RoHS : Compliant |
| 193,000 | |
| 709176001443006 | Kyocera AVX Components | 01P IDC CONTACT AWG 26-28 RoHS : Compliant |
| 98,000 | ||
| 009176002011806 | Kyocera AVX Components | 02P IDC Connector 20AWG RoHS : Compliant |
| 37,000 | ||
| 3403.0176.24 | Schurter Electronic Components | UMT250 10A 250V SMT SLOW IEC/UL RoHS : Compliant |
| 24,000 | ||
| Q65110A1766 | ams OSRAM Group | SMARTLED YELLOW LC RoHS : Compliant |
| 20,000 | ||
| UFZVFHTE-176.8B | ROHM Semiconductor | Z-DIODE 0,5W 6,86V SOD-323FL RoHS : Compliant |
| 12,050 | ||
| UDZVFHTE-176.8B | ROHM Semiconductor | ZENER-DIODE 0,2W 6,8V SOD-323FL RoHS : Compliant |
| 12,000 | ||
| 009176003022806 | Kyocera AVX Components | 03P IDC Connector AWG22 BLAC RoHS : Compliant |
| 12,000 | ||
| UDZVTE-176.2B | ROHM Semiconductor | Z-DIODE 0,2W 6,2V 2% SOD323 RoHS : Compliant |
| 9,000 | ||
UDZSTE-176.8B![]() | ROHM Semiconductor | Z-DIODE 0,2W 6,93V 2% SOD-323 RoHS : Compliant |
| 9,000 | ||
| 709176001422006 | Kyocera AVX Components | 01P IDC Connector AWG22 RoHS : Compliant |
| 6,000 | ||
| 009176003853906 | Kyocera AVX Components | 03P IDC Connector 22AWG RoHS : Compliant |
| 3,400 | ||
| 009176003711906 | Kyocera AVX Components | 03P IDC HEADER RoHS : Compliant |
| 2,400 | ||
| 009176001863906 | Kyocera AVX Components | 01P IDC Connector RoHS : Compliant |
| 10 | ||
| XMC7200D-F176K8384AA | Infineon Technologies AG | Dual Cortex-M7 8384K TEQFP-176 125°C RoHS : Compliant |
| 1 | ||
![]() Chip 1 Exchange | 9-2176316-6 | TE Connectivity | INSTOCK RoHS : Compliant | 39,000 | ||
| 9-1768016-1 | TE Connectivity | INSTOCK RoHS : Compliant | 16,598 | |||
| NKG3176D-38.4 MHZ | INSTOCK | 6,337 | ||||
| DS75176BMX | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 2,364 | |||
| LPC1769FBD100/P1K | NXP Semiconductors | INSTOCK RoHS : Compliant | 1,800 | |||
| 0-176497-9 | SHINA | INSTOCK | 1,786 | |||
| 1766136- | INSTOCK | 1,776 | ||||
| 5-1768016-7 | TE Connectivity | INSTOCK RoHS : Compliant | 1,300 | |||
| GF117-633-A2 | NVE Corporation | INSTOCK | 683 | |||
| 1766576- | INSTOCK | 406 | ||||
| 88E6176-A1-TFJ2I000 | Marvell Technology Group Ltd | INSTOCK RoHS : Compliant | 260 | |||
| 1766783- | Phoenix Contact | INSTOCK | 170 | |||
| 1-1761614-5 | TE Connectivity | INSTOCK RoHS : Not Compliant | 145 | |||
| MDSTBV 2,5/ 2-G-5,08 GY /1764138 | Phoenix Contact | INSTOCK | 36 | |||
| LC4256V75T176C | INSTOCK | 28 | ||||
![]() Avnet Silica | PCF85176T/1Y | NXP Semiconductors | LCD Driver 18V to 55V 56Pin TSSOP TR (Alt: PCF85176T/1Y) RoHS : Compliant | 198,000 | ||
| LPC1768FBD100K | NXP Semiconductors | ARM MCU 32bit ARM CortexM3 100 MHz 512 KB 64 KB 100 Pins LQFP (Alt: LPC1768FBD100K) RoHS : Compliant | 40,500 | |||
AP2176SG-13![]() | Diodes Incorporated | USB Power SW Hi Side Dual 55V 15A 8Pin SOP TR (Alt: AP2176SG-13) RoHS : Compliant | 22,500 | |||
| LPC1769FBD100K | NXP Semiconductors | MCU 32Bit LPC1769 ARM CortexM3 RISC 512KB Flash 64KB SRAM 100Pin LQFP TR (Alt: LPC1769FBD100K) RoHS : Compliant | 12,510 | |||
| NCP176AMX180TCG | onsemi | LDO Regulator 500 mA UltraLow Dropout High PSRR with Enable XDFN41010 Active Discharge (Alt: NCP176AMX180TCG) RoHS : Compliant | 10,000 | |||
| LPC1767FBD100K | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 100 MHz 512 KB (Alt: LPC1767FBD100K) RoHS : Compliant | 9,000 | |||
| PIC16F1769-E/SS | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 20Pin SSOP Tube (Alt: PIC16F1769-E/SS) RoHS : Compliant | 4,958 | |||
| MIMXRT1176AVM8B | NXP Semiconductors | RT1170 AUTO 289BGA C0 (Alt: MIMXRT1176AVM8B) RoHS : Compliant | 2,584 | |||
| CA11176_TINA2-WW | LEDIL | ASSEMBLY ROUND 1 POS 161MM OD 11MM H (Alt: CA11176_TINA2-WW) RoHS : Compliant | 1,840 | |||
| MCXA176VPN | NXP Semiconductors | (Alt: MCXA176VPN) RoHS : Compliant | 1,300 | |||
LPC1763FBD100K![]() | NXP Semiconductors | ARM MCU 32bit ARM CortexM3 100 MHz 256 KB 64 KB 100 Pins LQFP (Alt: LPC1763FBD100K) RoHS : Compliant | 810 | |||
| XR17V358IB176-F | MaxLinear Inc | UART Interface 8 Channels 3125 Mbps 3 V to 36 V 176 Pins FPBGA (Alt: XR17V358IB176-F) RoHS : Compliant | 480 | |||
| LPC1764FBD100K | NXP Semiconductors | Microcontroller 32Bit ARM CortexM3 RISC 128KBytes Flash 33V 100Pin LQFP Tray (Alt: LPC1764FBD100K) RoHS : Compliant | 450 | |||
| MIMXRT1176AVM8A | NXP Semiconductors | (Alt: MIMXRT1176AVM8A) RoHS : Compliant | 304 | |||
| PIC16F1764-I/ST | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 14Pin TSSOP Tube (Alt: PIC16F1764-I/ST) RoHS : Compliant | 192 | |||
![]() Braemac Americas-Symmetry | 3990251761 | Telit | BLUEDEV+S50/AI |
| 1 | |
| SI5335B-B11762-GM | Skyworks Solutions Inc | 4-output, any frequency (< 200 MHz), any output, clock generator (xtal input) |
| 1 | ||
AX7DAF1-768.0000T![]() | Abracon Corporation | XTAL OSC XO 768.0000MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
| AANI-FB-0176-1 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| MAT.176C | Taoglas Antenna Solutions | 4-in-1 5G Multi-Antenna Board (84x45mm) antennas with 4x 100mm 1.13 Cables & MHF4 Connectors |
| 0 | ||
| 450061 - 76002112 IS REPLACEMENT | Digi International Inc | 18V PSU Power Supply for 633x-MX/6310-DX with Barrel Jack connector (Replacement) |
| 0 | ||
| FO7HHABM25.176-T1 | Abracon Corporation | SMD Oscillator, 25.176 MHz, 50.0 ppm, -40 To +85 C, 5.0V+-10%, HCMOS, 7 x 5 mm RoHS : Compliant |
| 0 | ||
| PAD.176.E | Taoglas Antenna Solutions | PA.176.A 1.7-6GHz High Band SMD Dielectric Antenna on EVB Board |
| 0 | ||
| 802-RF1176.45M-C | Abracon Corporation |
| 0 | |||
| 802-RF1176.45M-A | Abracon Corporation |
| 0 | |||
| 76002176 | Digi International Inc |
| 0 | |||
| GD3SA1SA2A0017620 | Connekt Precision Electronics Co Ltd | Connector A:SA5PP-SC003CG-GD Connector B:SA5JJ-SC203PG-GD Heat Shrink Tube: X 2 pcs Cable Type:RG58 C/U (Black) Length:25 feet (7.5-meter) without connector |
| 0 | ||
| MAT.176A | Taoglas Antenna Solutions | 4-in-1 5G Multi-Antenna Board (60x60mm) antennas with 4x 100mm 1.13 Cables & MHF4 Connectors |
| 0 | ||
| PA.176.A | Taoglas Antenna Solutions | PA.176.A 5G/4G High-Band Cellular SMD Antenna |
| 0 | ||
![]() Chip-Germany GmbH | LT1763CS8-5.0 | Linear Technology | 127 | |||
| GMSTBV2,5/3G-7,62 1766576 | Phoenix Contact | 5 | ||||
| 1763201445 | Scott Western Company | 4 | ||||
![]() Component Electronics, Inc | DS75176BMX | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,802 | |
| LPC1769FBD100-551 | NXP Semiconductors | IN STOCK SHIP TODAY |
| 107 | ||
| 1766050-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 100 | ||
| 80-4000-3176-3 | 3M | IN STOCK SHIP TODAY |
| 26 | ||
LT1761ES5-2.5![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 23 | ||
| SN75A176D | Texas Instruments | IN STOCK SHIP TODAY |
| 21 | ||
| 176138-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 17 | ||
| 71764-0110 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 11 | ||
| DPXMA-9-MS3176 | ITT Interconnect Solutions | IN STOCK SHIP TODAY |
| 10 | ||
LT1761ES5-5#TRM![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 7 | ||
| M1-7611B-5 | Harris Semiconductor | IN STOCK SHIP TODAY | 6 | |||
| 61763-01 | IN STOCK SHIP TODAY |
| 5 | |||
| 68617-618 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| HSHM-H176DPWR5-8CP1-TR40B | 3M | IN STOCK SHIP TODAY |
| 2 | ||
| 601717-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
![]() DB Roberts | E3-2215-176 | Southco | E3-2215-176 | 0 | ||
| 8176-1032-A-24 | RAF Electronic Hardware | 0 | ||||
| 551764 | Essentra Components | 0 | ||||
| M0717-6-AL-0 | RAF Electronic Hardware | Metric Round Spacers | 0 | |||
| M0717-6-N | RAF Electronic Hardware | 0 | ||||
| 4517-632-SS-20 | RAF Electronic Hardware | 0 | ||||
| AV-D32-79W161-76 | Southco | ARM ASSY, VERTICALLY ARTICULATION | 0 | |||
| 1769 | Heyco | RDD 100A-7 PIGTAIL BLACK | 0 | |||
| 1111760000VR | Essentra Components | 0 | ||||
| 1176-10-A | RAF Electronic Hardware | 0 | ||||
| M6176-4007-SS-20 | RAF Electronic Hardware | 0 | ||||
| E3-224-176 | Southco | E3-224-176 | 0 | |||
| 461763 | Essentra Components | 0 | ||||
| 1717-632-A-6 | RAF Electronic Hardware | 0 | ||||
| 23011765 | Pop Rivets | PNT1000-18 | 0 | |||
![]() EBV Elektronik | LPC1768FBD100K | NXP Semiconductors | ARM MCU 32bit ARM CortexM3 100 MHz 512 KB 64 KB 100 Pins LQFP (Alt: LPC1768FBD100K) RoHS : Compliant | 155,430 | ||
| LPC1765FBD100K | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 100 MHz 256 KB (Alt: LPC1765FBD100K) RoHS : Compliant | 13,140 | |||
| C17677_STRADA-2X2-SHD-BLK | LEDIL | Backlight Control Shade for STRADA Family 2x2 LEDs Polycarbonate Black (Alt: C17677_STRADA-2X2-SHD-BLK) RoHS : Compliant | 11,840 | |||
| NCP176AMX180TCG | onsemi | LDO Regulator 500 mA UltraLow Dropout High PSRR with Enable XDFN41010 Active Discharge (Alt: NCP176AMX180TCG) RoHS : Compliant | 10,000 | |||
| PCF85176T/1Y | NXP Semiconductors | LCD Driver 18V to 55V 56Pin TSSOP TR (Alt: PCF85176T/1Y) RoHS : Compliant | 4,000 | |||
| 1ED44176N01FXUMA1 | Infineon Technologies AG | MOSFET and Power Driver 175A Single Low Side NonInverting 8Pin DSO TR (Alt: SP001885916) RoHS : Compliant | 2,500 | |||
| C17634_STRADA-2X2-LM2 | LEDIL | MultiLens Array for Cree J Series 5050 Round LESXPG3LUXEON 5050 Round LESOSLON Square CSSRM2C (Alt: C17634_STRADA-2X2-LM2) RoHS : Compliant | 2,080 | |||
| MCXA176VLL | NXP Semiconductors | (Alt: MCXA176VLL) RoHS : Compliant | 720 | |||
| LPC1766FBD100K | NXP Semiconductors | Microcontroller 32Bit ARM CortexM3 RISC 256KBytes Flash 33V 100Pin LQFP Tray (Alt: LPC1766FBD100K) RoHS : Compliant | 450 | |||
| MIMXRT1176DVMAB | NXP Semiconductors | RT1170 CONM 289BGA C0 (Alt: MIMXRT1176DVMAB) RoHS : Compliant | 304 | |||
| MIMXRT1176CVM8A | NXP Semiconductors | (Alt: MIMXRT1176CVM8A) RoHS : Compliant | 152 | |||
| PIC16F1765-I/ST | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 14Pin TSSOP Tube (Alt: PIC16F1765-I/ST) RoHS : Compliant | 0 | |||
| PIC16F1769-I/SS | Microchip Technology Inc | 8 Bit MCU PIC16 Family PIC16F176x Series Microcontrollers PIC16 32 MHz 14 KB 20 Pins SSOP (Alt: PIC16F1769-I/SS) RoHS : Compliant | 0 | |||
| MIMXRT1176CVM8B | NXP Semiconductors | (Alt: MIMXRT1176CVM8B) RoHS : Compliant | 0 | |||
| PIC16LF1765-I/ST | Microchip Technology Inc | (Alt: PIC16LF1765-I/ST) RoHS : Compliant | 0 | |||
![]() ECCO | 9800000176 | ITT Interconnect Solutions | 1,724 | |||
| 10-821769-000 | Amphenol Industrial Operations |
| 981 | |||
| 10-821768-000 | Amphenol Industrial Operations |
| 731 | |||
| 4480176000 | ITT Interconnect Solutions | 241 | ||||
| 10-821766-000 | Amphenol Industrial Operations |
| 144 | |||
| 97-4106A-18-1S(417)(621) | Amphenol Industrial Operations |
| 8 | |||
![]() FDH Electronics | 10-417687-19H | Amphenol Aerospace | Connector 38999 | 39 | ||
| BACC63CT17-6SE-LC | SOURIAU-SUNBANK | Connector |
| 34 | ||
| D00000E20-1765.3 | Amphenol Positronic | Miscellaneous |
| 3 | ||
| 10-417670-219 | Amphenol Aerospace | Circular Conn |
| 2 | ||
| 10-417631-197 | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-417634-257 | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-417673-117 | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-417673-199 | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-417674-13H | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-417686-177 | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-417689-237 | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-417630-237 | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-417631-119 | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-417631-25H | Amphenol Aerospace | Connector 38999 | 0 | |||
| 10-417670-11H | Amphenol Aerospace | Connector 38999 | 0 | |||
![]() Pasternack Enterprises US | PE3C6717-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-400-UF Coax With Times Microwave Parts., Radio frequency assembly BNC male to BNC male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave parts from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave parts, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6717-60, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6717-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave parts. |
| 390 | |
| PE33176LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 24 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 24 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 24 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33176LF-24, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33176LF-24 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 24 inch length using RG405 coax, RoHS. |
| 9 | ||
| PE7017-6 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 25 Watt, VSWR Maximum: 1.4:1, Attenuation: 6 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 6 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 25 Watts Up to 18 GHz. PE7017-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7017-6 6 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 25 Watts at the stated attenuation value. Our fixed RF attenuator PE7017-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 9 | ||
| PE3C6176-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 4.3-10 male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 4.3-10 male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-250-4310M-RA-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and right angle TC-250-4310M-RA-LP 4.3-10 cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to right angle TC-250-4310M-RA-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-LP 4.3-10 to TC-250-4310M-RA-LP 4.3-10 cable is a male to male coax assembly, PE3C6176-100CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to right angle TC-250-4310M-RA-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-RA-LP 4.3-10 plug cable assembly PE3C6176-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to right angle TC-250-4310M-RA-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-250-4310M-RA-LP 4.3-10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6176-100CM can also be used in the other direction and will be right angle TC-250-4310M-RA-LP 4.3-10 male to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-RA-LP 4.3-10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-250-4310M-RA-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 4.3-10 male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 8 | ||
| PE33176LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 36 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 36 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 36 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33176LF-36, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33176LF-36 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 36 inch length using RG405 coax, RoHS. |
| 6 | ||
| PE3C4017-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 6 inches. Snap-On MMBX Plug to SMA Female Bulkhead Cable 6 Inch Length Using RG316 Coax., Radio frequency assembly snap-on MMBX plug to SMA female bulkhead cable 6 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to SMA female bulkhead cable 6 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and SMA bulkhead cable connection on the other. Our MMBX to SMA cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to SMA cable is a plug to female coax assembly, PE3C4017-6, can also be known as a MMBX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA jack cable assembly PE3C4017-6 is built with RG316 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMBX plug to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4017-6 can also be used in the other direction and will be SMA female bulkhead to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to SMA female bulkhead cable 6 inch length using RG316 coax. |
| 0 | ||
| PE3M0176-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Temperature Conditioned N Male to N Male Right Angle Low Loss Cable 200 cm Length Using PE-P142LL Coax., Pasternack temperature conditioned N male to N male right angle low loss cable 200 cm length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0176-200CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability type N to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with N type connection on one end and right angle N type connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly. PE3M0176-200CM can also be known as a temperature conditioned low loss type N plug to right angle type N plug cable assembly and will be shipped the same day after it is purchased. N type plug to type N plug cable assembly PE3M0176-200CM is built with PE-P142LL which is a flexible coax. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency N type male to N type right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0176-200CM can be used in the other direction and will be right angle type N male to type N male cable assembly. Pasternack high reliability low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for same-day shipment worldwide. Variations of PE44825 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N male to N male right angle low loss cable 200 cm length using PE-P142LL coax. |
| 0 | ||
| PE3W01768/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to MMCX Plug Right Angle Low Loss Cable 24 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly SMA male right angle to MMCX plug right angle low loss cable 24 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MMCX plug right angle low loss cable 24 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MMCX cable connection on the other. Our low loss right angle SMA to right angle MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W01768/HS-24 can also be known as a low loss right angle SMA plug to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01768/HS-24 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MMCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MMCX male cable assembly PE3W01768/HS-24 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01768/HS-24 can also be used in the other direction and will be a right angle MMCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W12176 | Pasternack Enterprises | Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. NMO Mount Sexless to UHF Male Cable Using LMR-195 Coax. PE3W12176 is a NMO Mount sexless to UHF male cable using LMR-195 coax. This Pasternack NMO Mount sexless to UHF male cable assembly uses a 50 Ohm NMO Mount for connector 1 and a 50 Ohm UHF for connector 2. Our sexless NMO Mount to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12176 NMO Mount sexless to UHF male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W17621 | Pasternack Enterprises | Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Receptacle, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to BNC Female Cable Using RG142 Coax. PE3W17621 is a D-Sub receptacle to BNC female cable using RG142 coax. This Pasternack D-Sub receptacle to BNC female cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm BNC for connector 2. Our receptacle D-Sub to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17621 D-Sub receptacle to BNC female cable assembly is constructed with RG142 coax. | 0 | |||
| PE3176LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to TNC Male Cable 48 Inch Length Using RG214 Coax, RoHS., Radio frequency assembly SMA male to TNC male cable 48 inch length using RG214 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 48 inch length using RG214 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3176LF-48, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3176LF-48 is built with RG214 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3176LF-48 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 48 inch length using RG214 coax, RoHS. |
| 0 | ||
| PE34417-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 60 inches. MHV Male to SHV Plug Cable 60 Inch Length Using RG316 Coax., Radio frequency assembly MHV male to SHV plug cable 60 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to SHV plug cable 60 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and SHV cable connection on the other. Our MHV to SHV cable assemblies have a male gender on end 1 and plug on end 2. This MHV to SHV cable is a male to plug coax assembly, PE34417-60, can also be known as a MHV plug to SHV male cable assembly and will be shipped same-day as it is purchased. MHV plug to SHV male cable assembly PE34417-60 is built with RG316 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MHV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34417-60 can also be used in the other direction and will be SHV plug to MHV male cable assembly if the opposite connectivity is required. MHV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to SHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to SHV plug cable 60 inch length using RG316 coax. |
| 0 | ||
| PE3FCA176-3M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual SC APC to ST UPC, SM OS2, 2.0mm Plenum, Yellow-3M. Pasternack’s PE3FCA176-3M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long patch cable assembly is equipped with duplex SC/APC to ST/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA176-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/APC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3M0176-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Temperature Conditioned N Male to N Male Right Angle Low Loss Cable 12 Inch Length Using PE-P142LL Coax., Pasternack temperature conditioned N male to N male right angle low loss cable 12 inch length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0176-12 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability N type to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with type N connection on one end and right angle type N connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly. PE3M0176-12 can also be known as a temperature conditioned low loss type N plug to right angle N type plug cable assembly and will be shipped the same day after it is purchased. type N plug to type N plug cable assembly PE3M0176-12 is built with PE-P142LL which is a flexible coax. The Pasternack flexible type N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency type N male to type N right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0176-12 can be used in the other direction and will be right angle type N male to N type male cable assembly. Pasternack high reliability low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for same-day shipment worldwide. Variations of PE44825 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N male to N male right angle low loss cable 12 inch length using PE-P142LL coax. |
| 0 | ||
| PE3W17624 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW240, RF Cable Type: LMR-LW240, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to QD QMA Male Cable Using LMR-LW240 Coax. PE3W17624 is a QMA male right angle to QMA male cable using LMR-LW240 coax. This Pasternack QMA male right angle to QMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm QMA for connector 2. QMA right angle to QMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA right angle to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17624 QMA male right angle to QMA male cable assembly is constructed with LMR-LW240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 176282-1 | TE Connectivity | AMP UNIVERSAL POWER CAP 2P Number of Positions: 2 Connector & Housing Type: Cap Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 2 Cap Housing With | Part Number: 176282-1 | Internal Number: 176282-1 | Alias Number: 5028 | TE Connectivity RoHS : Compliant |
| 289,251 | |
| 34176 | TE Connectivity | TERMINAL,PG SPD 12-10 10 Spade Terminal Type: Spade Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 2.62 – 5.64 mm² Wire Size: 5180 – 13100 CMA Stud Size: #10 Spade Tongue Terminal 12 – 10 AWG 2.62 – 5.64 mm² 5180 – 13100 CMA | Spade Terminal | Part Number: 34176 | Internal Number: 34176 | Alias Number: AMPS-0-0034176-0 | TE Connectivity RoHS : Compliant |
| 6,748 | ||
| 1761681-5 | TE Connectivity | IDC LOW PRO HDR 14P VERT HT BLACK Connector System: Wire-to-Board Number of Positions: 14 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 14 2.54 mm .1" | Ribbon Cable Connector | Part Number: 1761681-5 | Internal Number: 1761681-5 | TE Connectivity RoHS : Compliant |
| 2,612 | ||
| 176976-1 | TE Connectivity | AMP UNIVERSAL POWER PLG 3C PCB PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | PCB Header & Receptacle | Part Number: 176976-1 | Internal Number: 176976-1 | TE Connectivity RoHS : Compliant |
| 2,402 | ||
| 1-1761987-8 | TE Connectivity | ReceptacleConnAssm38PosTape/Re Pluggable Form Factor: QSFP+ Pluggable I/O Product Type: Connector Centerline (Pitch): .8 mm Centerline (Pitch): .032 in Sealable: No QSFP+ Connector .8 mm .032" | High Speed I/o | Part Number: 1-1761987-8 | Internal Number: 1-1761987-8 | TE Connectivity RoHS : Compliant |
| 2,296 | ||
| 176285-1 | TE Connectivity | AMP UNIVERSAL POWER CAP 6P Number of Positions: 6 Connector & Housing Type: Cap Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 6 Cap Housing With | Part Number: 176285-1 | Internal Number: 176285-1 | Alias Number: 0-0176285-1 | TE Connectivity RoHS : Compliant |
| 2,168 | ||
| 2311768-2 | TE Connectivity | AMPL REC, HD22, R/A, 26P, S/L Number of Positions: 26 Connector & Housing Type: Receptacle Connector System: Wire-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 26 Receptacle Wire-to-Board Board Mount | Part Number: 2311768-2 | Internal Number: 2311768-2 | TE Connectivity RoHS : Compliant |
| 1,634 | ||
| 1761608-6 | TE Connectivity | IDC LOW PRO HDR 16P VERT SHT LAT BLK Connector System: Wire-to-Board Number of Positions: 16 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 16 2.54 mm .1" | Ribbon Cable Connector | Part Number: 1761608-6 | Internal Number: 1761608-6 | TE Connectivity RoHS : Compliant |
| 1,121 | ||
| 1586176-1 | TE Connectivity | 12P UMNL PIN HDR 94VO NDH PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 12 Number of Rows: 3 PCB Mount Header Vertical Wire-to-Board 12 | PCB Header & Receptacle | Part Number: 1586176-1 | Internal Number: 1586176-1 | TE Connectivity RoHS : Compliant |
| 635 | ||
| 2-1761608-9 | TE Connectivity | IDC LOW PRO HDR 26P VERT SHT LAT BLUE Connector System: Wire-to-Board Number of Positions: 26 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 26 2.54 mm .1" | Ribbon Cable Connector | Part Number: 2-1761608-9 | Internal Number: 2-1761608-9 | TE Connectivity RoHS : Compliant |
| 549 | ||
| 1801176-1 | TE Connectivity | 2W RECEPTACLE HPSL CONNECTOR BLACK Nominal Voltage Architecture: 16 V Number of Positions: 2 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.5 mm 48V Ready 1.5Mm Sealed Connector | 16 V 2 Housing for Female Terminals Wire-to-Wire | Part Number: 1801176-1 | Internal Number: 1801176-1 | 1.5 mm | TE Connectivity RoHS : Compliant |
| 479 | ||
| 6-176146-6 | TE Connectivity | .187 PLUG HSG ASSY 2P GRAY Nominal Voltage Architecture: 12 V Number of Positions: 2 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 4.8 mm Econoseal & Connector Housing | 12 V Housing for Female Terminals Wire-to-Wire | Part Number: 6-176146-6 | Internal Number: 6-176146-6 | 4.8 mm | TE Connectivity RoHS : Compliant |
| 299 | ||
| 211769-4 | TE Connectivity | 17-9 CPC RECEPT REV SEX Number of Positions: 9 Connector Product Type: Housing Operating Voltage: 600 VDC Connector System: Wire-to-Wire Sealable: No Circular Power Connector | 9 Housing 600 VDC Wire-to-Wire | Part Number: 211769-4 | Internal Number: 211769-4 | TE Connectivity RoHS : Compliant |
| 244 | ||
| 5176139-2 | TE Connectivity | CONN SEC II 49 POS 100C/L Connector System: Board-to-Board Number of Positions: 98 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Contact Current Rating (Max): 3 A Board-to-Board 98 .1" 2.54 mm | Card Edge Power Connector | Part Number: 5176139-2 | Internal Number: 5176139-2 | .1" | TE Connectivity RoHS : Compliant |
| 163 | ||
| 3-1761608-3 | TE Connectivity | IDC LOW PRO HDR 40P VERT SHT L Connector System: Wire-to-Board Number of Positions: 40 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 40 2.54 mm .1" | Ribbon Cable Connector | Part Number: 3-1761608-3 | Internal Number: 3-1761608-3 | TE Connectivity RoHS : Compliant |
| 1 | ||
![]() Teledyne HiRel | 5962-9217601MRA![]() | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
| 5962-9217601MSA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
5962-9217601M2A![]() | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | TFCR0402-16W-C-1761BT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;1.76K;�0.1% RoHS : Compliant | 0 | ||
| TFCR0402-16W-C-1762DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;17.6K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-1763FT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;176K ;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-1762CT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;17.6K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-1762DT | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;17.6K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-1761FT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;1.76K;�1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-1762CT | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;17.6K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-4W-K-1760DT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�100PPM;176R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-1763DT | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;176K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-K-1762DT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;17.6K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-1761DT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;1.76K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-1762DT | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;17.6K;�0.5% RoHS : Compliant | 0 | |||
| TFCR2010-4W-C-1763BT | VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;176K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-K-1760DT-1K | VENKEL LTD | Thin Film CR;2010;1/4W;�100PPM;176R;�0.5% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-1760FT | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;176R;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | 51760-10405604CBLF | Amphenol Communications Solutions | Board Connector, 64 Contact(s), 4 Row(s), Female, Right Angle, Press Fit Terminal, Guide Pin, Receptacle | 16,821 | ||
| 51762-10404800AALF | Amphenol Communications Solutions | Board Connector, 52 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal, Guide Pin, Receptacle | 13,357 | |||
2-2176088-4![]() | TE Connectivity | Fixed Resistor, Thin Film, 0.166W, 1330ohm, 100V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 0603 RoHS : Compliant | 12,564 | |||
| AD9176BBP-CSH | Analog Devices Inc | DAC 16BIT RoHS : Not Compliant | 11,941 | |||
| ADP1763ACPZ-1.0-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 1V, CMOS RoHS : Compliant | 11,302 | |||
| MAXM17631AME | Analog Devices (Maxim Integrated) | 10,108 | ||||
| MAXM17630AME+ | Analog Devices Inc | Switching Regulator/Controller RoHS : Compliant | 8,681 | |||
| ADP1764ACPZ0.95-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 0.95V, CMOS RoHS : Compliant | 8,660 | |||
| PIC32MZ2025DAR176T-V/2J | Microchip Technology Inc | RISC Microcontroller, 32-Bit, FLASH, PIC32 CPU, 200MHz, CMOS, PQFP176 RoHS : Compliant | 8,497 | |||
| ADP1762ACPZ-0.9-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 0.9V, CMOS RoHS : Compliant | 6,220 | |||
| ADP1765ACPZ-1-2-R7 | Analog Devices Inc | 5,149 | ||||
| MAXM17630AME-T | Analog Devices (Maxim Integrated) | 5,136 | ||||
| ADP1763WACPZ-1.0-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 1V, CMOS RoHS : Compliant | 5,055 | |||
| PIC16LF1765-I/ST | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDSO14 RoHS : Compliant | 2,026 | |||
| R176404000 | Radiall | RF F Connector, 1 Contact(s), Female, Panel Mount, Cable And Panel Mount, Solder Terminal, Receptacle RoHS : Compliant | 559 | |||
![]() Waytek, Inc. | 91767 | FTZ Industries | 2/0 GA 3/8 Stud Tinned Copper Eyelet Heavy Duty Orange Code ALTERNATE 36359 |
| 2,947 | |
| 40176 | Hillsdale Terminal & Tool Inc | 22-18 GA Female Disconnect Red Heat Shrink .250 X .032 |
| 1,264 | ||
| 11-763 | Pollak | Trailer Connector Cable Guard Spring |
| 700 | ||
| 176-S0-150-2 | MP | 150A Trip/Reset 1/4"Stud Surface Mount Circuit Breaker Hi Amp Manual Recessed Button |
| 434 | ||
| 91769 | FTZ Industries | 2/0 GA 1/2 Stud Tinned Copper Eyelet Heavy Duty Orange Code ALT 36360 |
| 333 | ||
| 11-761 | Pollak | Boot for Socket |
| 148 | ||
| 176-S0-030-2 | MP | 30A Trip/Reset 1/4" Studs Surface Mount Circuit Breaker Hi Amp Manual Rescessed Button |
| 109 | ||
| 176-S0-100-2 | MP | 100A Trip/Reset 1/4"Stud Surface Mount Circuit Breaker Hi Amp Manual Recessed Button |
| 97 | ||
| 176-S2-200-2 | MP | 200A Trip/Reset 3/8"Stud Surface Mount Circuit Breaker Hi Amp Manual Recessed Button |
| 69 | ||
| 176-S0-050-2 | MP | 50A Trip/Reset 1/4" Studs Surface Mount Circuit Breaker Hi Amp Manuel Recessed Button |
| 27 | ||
| 61-765 | Ideal Industries Inc | Clamp Meter 660A Ideal 61-765 AC / DC Case & Test Leads Disc Way No Repl |
| 12 | ||
| 176-S0-080-2 | MP | 80A Manual Trip/Reset 1/4"Stud Surface Mount Circuit Breaker Hi Amp Recessed Button |
| 0 | ||
![]() Win Source Electronics | SN65176BDR/SN65176B | Texas Instruments |
| 150,000 | ||
| LM5176QPWPRQ1/LM5176QPWPTQ1 | Texas Instruments |
| 45,170 | |||
LT1761ES5-SD#TRMPBF![]() | Linear Technology | IC REG LDO ADJ 0.1A TSOT23-5 RoHS : Compliant |
| 9,630 | ||
| PIC16F1769-I/SS | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 20SSOP / PIC PIC® XLP™ 16F Microcontroller IC 8-Bit 32MHz 14KB (8K x 14) FLASH 20-SSOP RoHS : Compliant |
| 7,150 | ||
DS91C176TMAX/NOPB![]() | Texas Instruments | IC TXRX MULTIPOINT-LVDS 8SOIC RoHS : Compliant |
| 5,700 | ||
DS91C176TMAX![]() | Texas Instruments | IC TRANSCEIVER HALF 1/1 8SOIC RoHS : Not Compliant |
| 5,650 | ||
| ADP1762ACPZ-R7 | Analog Devices Inc | IC REG LINEAR POS ADJ 2A 16LFCSP RoHS : Compliant |
| 4,800 | ||
| PIC32MZ2064DAH176-I/2J | Microchip Technology Inc | IC MCU 32BIT 2MB FLASH 176LQFP / MIPS32® microAptiv™ PIC® 32MZ DA Microcontroller IC 32-Bit Single-Core 200MHz 2MB (2M x 8) FLASH 176-LQFP (20x20) RoHS : Compliant |
| 4,348 | ||
| SI32176-B-FM1R | Silicon Laboratories Inc | IC PROSLIC FXS DC-DC -110V 42QFN RoHS : Compliant |
| 2,660 | ||
LT1761ES5-2.5![]() | Linear Technology | 100mA, Low Noise, LDO Micropower Regulators in SOT-23 RoHS : Not Compliant |
| 2,300 | ||
DS75176BMX![]() | Texas Instruments | IC TXRX MULT PT RS485/422 8SOIC RoHS : Not Compliant |
| 2,200 | ||
| MAX17651AZT+T | Maxim Integrated Products | LDO Regulator Pos 1.2V to 18.5V 0.1A 8-Pin HVSSOP EP T/R RoHS : Compliant |
| 2,190 | ||
DS75176BMX/NOPB![]() | Texas Instruments | IC TXRX MULT PT RS485/422 8SOIC RoHS : Compliant |
| 2,180 | ||
| 1-917657-2 | TE Connectivity | CONN HEADER VERT 10POS 5.08MM / Connector Header Through Hole 10 position 0.200" (5.08mm) RoHS : Compliant |
| 1,350 | ||
ISP1763AHNUM![]() | ST-Ericsson | USB Transceiver 1TR 480.24Mbps 64-Pin VFQFPN EP T/R RoHS : Compliant |
| 393 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |