| поискавой системы для электроныых деталей |
|
1553F-R3 дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() DigiKey | 1553H4-12.000J33DTSTK | Hang Crystal International | 5032,12MHZ,HCMOS,3.3V,/-30PPM,- |
| 56,712 | |
| 1553H4-12.000J33DTSTK | Hang Crystal International | 5032,12MHZ,HCMOS,3.3V,/-30PPM,- |
| 56,320 | ||
| 1553D-156.250K18DTK | Hang Crystal International | 5032,6P,156.25MHZ,LVDS,1.8V,+/-1 |
| 29,345 | ||
| 1553D-156.250K18DTK | Hang Crystal International | 5032,6P,156.25MHz,LVDS,1.8V,+/-1 |
| 29,344 | ||
| 1553D-125.000K18DTK | Hang Crystal International | 5032,6P,125MHZ,LVDS,1.8V,+/-10PP |
| 29,343 | ||
| 1553D-125.000K18DTK | Hang Crystal International | 5032,6P,125MHz,LVDS,1.8V,+/-10pp |
| 29,342 | ||
| 4-1415536-2 | TE Connectivity | RELAY GEN PURPOSE SPST 16A 12V RoHS : Compliant |
| 5,675 | ||
| 1553 VI005 | Alpha Wire | HOOK-UP STRND 20AWG VIOLET |
| 1,300 | ||
| 1553212007 | POWELL ELECTRONICS | CABLE 8COND 12AWG/16AWG 100M |
| 25 | ||
| 1553212008 | POWELL ELECTRONICS | CABLE 8COND 12AWG/16AWG 250M |
| 25 | ||
| 2-1415538-8 | JRH ELECTRONICS | V23047-A1015-A501 |
| 18 | ||
| 1415539-5 | JRH ELECTRONICS | RELAY SPDT 12A 24V |
| 16 | ||
| 1553BRDBK | Hammond Manufacturing | BOX ABS RED 4.62"L X 3.11"W RoHS : Compliant |
| 7 | ||
| 15536 | Variohm EuroSensor | EPT3100-A-25000-B-2-F (94012016) |
| 5 | ||
| 1553 GR001 | Alpha Wire | HOOK-UP STRND 20AWG GREEN 1000' |
| 2 | ||
![]() Avnet Americas | SI1553CDL-T1-GE3 | Vishay Intertechnologies | - Tape and Reel (Alt: SI1553CDL-T1-GE3) RoHS : Compliant |
| 6,000 | |
| M39014/01-1553 | KEMET Corporation | Multilayer Ceramic Capacitor, 0.1 uF, 50 V, ? 10%, Radial Leaded, BX, 5.08 mm, 4.83 mm, 2.29 mm - Bulk (Alt: M39014/01-1553) RoHS : Not Compliant |
| 3,700 | ||
| M39014/01-1553 | Kyocera AVX Components | Multilayer Ceramic Capacitor, 0.1 uF, 50 V, ? 10%, BX, 5.08 mm, Radial Box - 2 Pin, CKR05 Series - Bulk (Alt: M39014/01-1553) RoHS : Not Compliant |
| 1,507 | ||
| B-155-3803 | TE Connectivity | - Bag (Alt: E38778-000) RoHS : Compliant |
| 707 | ||
| 102155-3 | TE Connectivity | Conn Ejector Header HDR 16 POS 2.54mm Solder ST Thru-Hole - Trays (Alt: 102155-3) RoHS : Not Compliant |
| 406 | ||
| PL155-33 | Bel Fuse | - Bag (Alt: PL155-33) RoHS : Compliant |
| 54 | ||
| TQ1553-45B | iNRCORE LLC | - Rail/Tube (Alt: TQ1553-45B) RoHS : Not Compliant | 13 | |||
| 76155-3607 | Molex | - Trays (Alt: 0761553607) RoHS : Compliant |
| 0 | ||
| TLN1553-45 | iNRCORE LLC | - Rail/Tube (Alt: TLN1553-45) RoHS : Not Compliant |
| 0 | ||
| TLN1553-5 | iNRCORE LLC | - Rail/Tube (Alt: TLN1553-5) RoHS : Not Compliant |
| 0 | ||
| STQ1553-1 | iNRCORE LLC | - Rail/Tube (Alt: STQ1553-1) RoHS : Not Compliant |
| 0 | ||
| 1-1553325-2 | TE Connectivity | - Bulk (Alt: 1-1553325-2) RoHS : Compliant | 0 | |||
| 1-1553353-1 | TE Connectivity | - Cable Rools/Shrink Tubing (Alt: 1-1553353-1) RoHS : Compliant | 0 | |||
| 1-1553406-2 | TE Connectivity | - Bulk (Alt: 1-1553406-2) RoHS : Compliant | 0 | |||
| 2-1415538-8 | TE Connectivity | - Trays (Alt: 2-1415538-8) RoHS : Compliant |
| 0 | ||
![]() Newark | 081.55.332 | ETTINGER | SCREW, PAN HEAD TORX, STEEL, M3, 8MM; RoHS : Compliant |
| 25,114 | |
| 1553WDBK | Hammond Manufacturing | HANDHELD ENCLOSURE, WATERTIGHT, BLK/GREY; (Alternate Part Number: 623980402673 RoHS : Compliant |
| 1,100 | ||
| M39014/01-1553V | Kyocera AVX Components | CAP, MLCC, 0.1UF, 50V, ±10%; RoHS : Compliant |
| 1,000 | ||
| 1553BTBUBKBAT | Hammond Manufacturing | ENCLOSURE PLAST, HANDHELD, ABS, 117.1MM; RoHS : Compliant |
| 983 | ||
| 1553TGYBAT | Hammond Manufacturing | ENCLOSURE, HANDHELD, T, GREY; (Alternate Part Number: 623980027814 RoHS : Compliant |
| 724 | ||
| M39014/01-1553V | KEMET Corporation | CAP, MLCC, 0.1UF, 50V, RADIAL; RoHS : Not Compliant |
| 600 | ||
| B-155-3802 | TE Connectivity | SOLDER SLEEVE, 1.95MM, BOX 100, PK100; RoHS : Compliant |
| 463 | ||
| 1553DBK | Hammond Manufacturing | CASE, ABS, BLACK, 147X89X24MM; (Alternate Part Number: 623980581644 RoHS : Compliant |
| 109 | ||
| 1553DBKBAT | Hammond Manufacturing | CASE, ABS, BLACK, 147X89X24MM; RoHS : Compliant |
| 69 | ||
| 1553CXBK | Hammond Manufacturing | ENCLOSURE PLAST, HANDHELD, ABS, 33.02MM; RoHS : Compliant |
| 24 | ||
| 1553 RD005 | Alpha Wire | HOOK-UP WIRE; RoHS : Compliant |
| 6 | ||
| SC1553A100 | Hammond Manufacturing | SC1553A - PKG OF 100 SCREWS; RoHS : Compliant |
| 5 | ||
| SC1553C100BK | Hammond Manufacturing | SC1553CBK - PKG OF 100 SCREWS; RoHS : Compliant |
| 3 | ||
| 3-1415535-7 | TE Connectivity | RELAY, SPST-NO, 250VAC, 5A; RoHS : Compliant |
| 2 | ||
| 6-1415537-1 | TE Connectivity | POWER RELAY, 3PST-NO/NC, 12VDC, 8A, THT; RoHS : Compliant |
| 1 | ||
![]() RS | C1553ABBRXCE1 | Arcolectric | DPST LIT ROCKER SWITCH W/100K RESISTOR-125/250V-LEGEND |
| 993 | |
| 14-56-3143 (70400-1553) | Molex | HEADERS, CGRID SL IDT OPT G 30 SAU 14CKT |
| 450 | ||
| 1815534 | RS Pro | ALUMINUM ELECTROLYTIC CAPACITOR 100UF 35VDC THROUGH HOLE 8 X 11MM ANSI |
| 186 | ||
| 1SNA115532R0000 (011553200) | TE Connectivity | D2 5/6.DPA TERMINAL BLOCK, ENTRELEC |
| 107 | ||
| 1815536 | RS Pro | ALUMINUM ELECTROLYTIC CAPACITOR 4.7UF 500VDC THROUGH HOLE 10MM DIA X 20MM |
| 48 | ||
| 1553611 (SACC-M12FSD-4Q SH) | Phoenix Contact | FIELDBUS CONNECTOR WITH QUICKON CONNECTION METHOD 4 POS ANGLED PLUG |
| 48 | ||
| 1SNA115537R0500 (011553705) | TE Connectivity | D2 5/6.DL TERMINAL BLOCK, ENTRELEC |
| 25 | ||
| PT5L7SB5 (1-1415535-3) | TE Connectivity | RELAY;GEN-PURP;4PDT;6A;CTRL-V 115AC;VOL-RTG 240AC;W/SOCKET, CLIP, MODULE, TAG |
| 5 | ||
| RSFV 36-0.3M/NPT (U-01553) | TURCK Inc | CIRCULAR 7/8" PLUG, 3 POSITION, 10A, 600V, 0.3 METER, PVC, RSFV SERIES |
| 4 | ||
| 1SNA115530R1200 (011553012) | TE Connectivity | MA2 5/5.D1.1 TERMINAL, ENTRELEC |
| 4 | ||
| 1553 YL001 (NULL) | Alpha Wire | HOOK-UP WIRE, TC, 20 AWG, 10X30, YELLOW PVC INSULATED, -40 TO +80C, 1000V |
| 3 | ||
| 1553161 (SACC-M12MS-4CON-PG 7-VA) | Phoenix Contact | SACC SERIES 4 POLE CONN PLUG MALE CONTACTS SCREW ON MATING IP65 IP67 IP69K |
| 3 | ||
| B-155-3801 (5425599) | TE Connectivity | SOLDER SLEEVE SHIELD TERMINATOR, 1.65MM, 0.065IN INSIDE, SHRINKS TO 0.035IN |
| 2 | ||
| 1553 | RACO | COUPLNG COMB RIGID - FLEX 3/4" MALL IRON |
| 0 | ||
| 1553 | Adafruit Industries | MOJO FPGA DEVELOPMENT BOARD |
| 0 | ||
![]() Microchip Technology Inc | MIC1553YM5-TR | Microchip Technology Inc | 500 kHz, 2.7V to 18V, '555' RC Timer/Oscillator with Shutdown, SOT-23, Projected EOL: 2051-02-07 RoHS : Compliant |
| 0 | |
| CORE1553-DEV-KIT-2 | Microchip Technology Inc | CORE1553 DEVELOPMENT KIT, Projected EOL: - Contact for Pricing | 0 | |||
![]() Rochester Electronics | LTC1553CG#PBF | Analog Devices Inc | IC VOLT REG 1 OUT 1.8V - 3.5V 19A 20-SOP Tube RoHS : Compliant |
| 165 | |
| HD1-15530B3976 | Harris Semiconductor | CMOS MANCHESTER ENCODER-Decoder RoHS : Not Compliant |
| 100 | ||
| HD1-15531-9 | Harris Semiconductor | Manchester Encoder/Decoder, CMOS, CDIP40 RoHS : Not Compliant |
| 237 | ||
| HD1-15531B-9 | Harris Semiconductor | Manchester Encoder/Decoder, CMOS, CDIP40 RoHS : Not Compliant |
| 259 | ||
| HD3-15531B-9 | Harris Semiconductor | Manchester Encoder/Decoder, CMOS, PDIP40 RoHS : Not Compliant |
| 1,314 | ||
LTC1553CSW#PBF![]() | Linear Technology | IC VOLT REG 1 OUT 1.8V - 3.5V 19A 20-SOIC Tube RoHS : Compliant |
| 38 | ||
DS1553W-120![]() | Maxim Integrated Products | DS1553W120 64Kbyte, Nonvolatile, Year-2000-Compliant Timekeeping Ram RoHS : Not Compliant |
| 1,110 | ||
DS1553W-150![]() | Maxim Integrated Products | DS1553W150 64Kbyte, Nonvolatile, Year-2000-Compliant Timekeeping Ram RoHS : Not Compliant |
| 72 | ||
| DS1553WP-150 | Maxim Integrated Products | Real Time Clock, Non-Volatile, 0 Timer(s), CMOS RoHS : Not Compliant |
| 5,221 | ||
MAX1553ETA-T![]() | Maxim Integrated Products | LED Driver, 1-Segment, BICMOS RoHS : Not Compliant |
| 2,029 | ||
| COM1553A/B | Rochester Electronics LLC | COM1553A/B - Mil-Std-1553B Smart Controller RoHS : Unknown |
| 74 | ||
COM1553B![]() | SMSC | Mil-Std-1553 Controller, 1 Channel(s), 0.125MBps, MOS, PDIP40 RoHS : Not Compliant |
| 509 | ||
| COM1553BCD | SMSC | Serial I/O Controller, 1 Channel(s), MOS, CDIP40 RoHS : Not Compliant |
| 93 | ||
| COM1553BHR | SMSC | Serial I/O Controller, 1 Channel(s), MOS, CDIP40 RoHS : Not Compliant |
| 178 | ||
![]() Sager | 1-5536280-1 | TE Connectivity | Board to Board & Mezzanine Connectors 240 PLUG VT 095 30AU RoHS : Compliant | 0 | ||
| 2-1415538-8 | TE Connectivity | Safety Relays V23047-A1015-A501 RoHS : Compliant |
| 0 | ||
| 4-1415536-2 | TE Connectivity | General Purpose Relays 16A, 12VDC 1 Form A(NO)PCB MNT RoHS : Compliant | 0 | |||
| 1532155-3 | TE Connectivity | D-Sub Micro-D Connectors 094-7306-5000=MCK-C2-LM-21SS | 0 | |||
| 1553112008 | Molex | Multi-Conductor Cables | 0 | |||
| 1553212007 | Molex | Multi-Conductor Cables |
| 0 | ||
| 1553312006 | Molex | Multi-Conductor Cables | 0 | |||
| 15536 | Keystone Electronics Corp | PCBs & Breadboards 2 ROW TURRET BRD 10P RoHS : Compliant |
| 0 | ||
| 1415539 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-3P-M12MR/0 6-PVC M 8FR RoHS : Compliant |
| 0 | ||
| 1415539-5 | TE Connectivity | General Purpose Relays RT314A24WG RoHS : Compliant | 0 | |||
| PS-11553-B | BUD Industries Inc | PLASTIBOX STYLE F PLASTIC ELECTRONIC ENCLOSURE BLACK (1.5 X 4.9 X 6.9 IN) |
| 0 | ||
| 1553112009 | Molex | Multi-Conductor Cables | 0 | |||
| 1553212008 | Molex | Multi-Conductor Cables |
| 0 | ||
| 1553312007 | Molex | Multi-Conductor Cables | 0 | |||
| 15537 | Keystone Electronics Corp | PCBs & Breadboards TERMINAL BOARD |
| 0 | ||
![]() TME | C1553ALNAK | Bulgin | ROCKER |
| 5,200 | |
| C1553ALMBG3 | Bulgin | ROCKER; DPST; Pos: 2; ON-OFF; 16A/250VAC; 20A/28VDC; green; 1550 |
| 2,077 | ||
| 2271553-1 | TE Connectivity | Splice terminal: rail; 15A; for DIN rail mounting; spring clamp RoHS : Compliant |
| 1,235 | ||
| 1-5535676-3 | TE Connectivity | Connector: pin strips; female; PIN: 14; soldering,THT; Inom: 2A RoHS : Compliant |
| 560 | ||
| SA10101553 | Cyntech Inc | Sensor: temperature; Pt100; 100Ω; cl.B 0,2 %; Body dim: Ø3x6mm; THT |
| 226 | ||
| 1415539-5 | TE Connectivity | Relay: electromagnetic; Ucoil: 24VDC; SPDT; Icontacts max: 16A; RT1 RoHS : Compliant |
| 25 | ||
| 1553DBK | Hammond Manufacturing | Enclosure: multipurpose; X: 89mm; Y: 147mm; Z: 25mm; 1553; ABS; black RoHS : Compliant |
| 20 | ||
| 1553 RD005 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 20AWG; PVC; red; 1kV; 30.5m; 1x20AWG |
| 16 | ||
| 1553BTBUBKBAT | Hammond Manufacturing | Enclosure: multipurpose; X: 79mm; Y: 117mm; Z: 24mm; 1553; ABS; blue RoHS : Compliant |
| 1 | ||
| 1553 GR001 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 20AWG; PVC; green; 1kV; 305m |
| 0 | ||
| 1553 VI005 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 20AWG; PVC; violet; 1kV; 30.5m |
| 0 | ||
| 19041553 | CML Innovative Technologies | Indicator: LED; prominent; red; 36VDC; Ø8mm; metal |
| 0 | ||
| 1553BRDBK | Hammond Manufacturing | Enclosure: multipurpose; X: 79mm; Y: 117mm; Z: 24mm; 1553; ABS; red RoHS : Compliant |
| 0 | ||
| 1553TGYBAT | Hammond Manufacturing | Enclosure: for devices with displays; X: 100mm; Y: 210mm; Z: 32mm RoHS : Compliant |
| 0 | ||
| 1015533 | Phoenix Contact | Automation module: safety relay; 24VDC; IN: 2; PSRmini; -35÷60°C RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | BA15532F-E2![]() | ROHM Semiconductor | RoHS : Compliant |
| 90 | |
![]() ComSIT USA | 3D1Y305KV15531028018 | Songtian Electronics (STE) | AVAILABLE EU | 4,166 | ||
| SI1553CDLT1GE3 | Vishay Intertechnologies | AVAILABLE EU | 1,458 | |||
![]() ComSIT USA | L1553IDTTNR254P | Kingbright | 5 X 5 MM SQUARE TOP LED LAMP Single Color LED, High Efficiency Red, Diffused Red, 5mm RoHS : Compliant | 5,000 | ||
| L1553IDT | Kingbright | LED Red 1 LED Diffused Radial RoHS : Compliant | 4,000 | |||
| LTC1553CGTR | Linear Technology | 5-BIT PROGRAMMABLE SYNCHRONOUS SWITCHING REGULATOR CONTROLLER FOR PENTIUM II PROCESSOR Switching Controller, Voltage-mode, 19A, 350kHz Switching Freq-Max, CMOS, PDSO20 RoHS : Not Compliant | 3,570 | |||
| SI1553DLT1E3 | Vishay Intertechnologies | COMPLEMENTARY 2.5 V (G-S) MOSFET Small Signal Field-Effect Transistor, 0.66A I(D), 20V, 2-Element, N-Channel and P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 3,230 | |||
BA15532FE2![]() | ROHM Semiconductor | Op Amp Standard 20MHz 8-SOIC T/R RoHS : Compliant | 2,500 | |||
| L1553YDT | Kingbright | 5 X 5 MM SQUARE TOP LED LAMP Single Color LED, Yellow, Diffused, 5mm RoHS : Compliant | 2,000 | |||
| L1553HDT | Kingbright | 5 X 5 MM SQUARE TOP LED LAMP Single Color LED, Bright Red, Diffused Red, 5mm RoHS : Compliant | 1,000 | |||
![]() Interstate Connecting Components | 2-1415538-8 | TE Connectivity | V23047-A1015-A501 RoHS : Compliant |
| 0 | |
| 155341-3005 | ITT Interconnect Solutions | MKJ3A7T6-6SN | 0 | |||
| 155345-3001 | ITT Interconnect Solutions | MKJ3A7T8-13SN | 0 | |||
| 155346-3000 | ITT Interconnect Solutions | MKJ3A7T10-26PN | 0 | |||
| 155381-0002 | ITT Interconnect Solutions | MKJ3A1F6-6PN | 0 | |||
| 155382-0001 | ITT Interconnect Solutions | MKJ3A1F7-10SN | 0 | |||
| 155383-0000 | ITT Interconnect Solutions | MKJ3A1F9-19PN | 0 | |||
| 155391-3033 | ITT Interconnect Solutions | MKJ3B1T6-6SZ | 0 | |||
| 155393-3031 | ITT Interconnect Solutions | MKJ3B1T9-19SZ | 0 | |||
| 155394-3030 | ITT Interconnect Solutions | MKJ3B1T12-37PZ | 0 | |||
| 155396-2011 | ITT Interconnect Solutions | MKJ3B1Z10-26SX | 0 | |||
| 155305-0003 | ITT Interconnect Solutions | NDD-9PBR-TT | 0 | |||
| 155308-0000 | ITT Interconnect Solutions | NDD-15S0PY18T | 0 | |||
| 155346-3001 | ITT Interconnect Solutions | MKJ3A7T10-26SN | 0 | |||
| 155381-0003 | ITT Interconnect Solutions | MKJ3A1F6-6SN | 0 | |||
![]() PEI Genesis | TET-1553-1-78 | Trompeter |
| 80 | ||
| TET-1553-3-2K | Trompeter |
| 0 | |||
| MDM96515-538 | ITT Interconnect Solutions |
| 0 | |||
| 913-1553-1631-525 | Dialight |
| 0 | |||
| 12311553 | SOURIAU-SUNBANK |
| 0 | |||
| 031-5539-RFX | Amphenol RF |
| 0 | |||
| TET-1553-1-3K | Trompeter |
| 0 | |||
| Y1553P | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| BKAD2-155-31201 | ITT Interconnect Solutions |
| 0 | |||
| TET-1553-2-2K | Trompeter |
| 0 | |||
| TET-1553-2-3K | Trompeter |
| 0 | |||
| 10-615534-018 | Amphenol Corporation |
| 0 | |||
| S4966-01-5-5-3.50 | SOURIAU-SUNBANK |
| 0 | |||
| 031-5539 | Amphenol RF |
| 0 | |||
| TET-1553-2-78 | Trompeter |
| 0 | |||
![]() Powell Electronics | B-155-3802 | TE Connectivity | Connectors RoHS : Compliant |
| 2,973 | |
| B-155-3807-CS4143 | TE Connectivity | Connectors |
| 2,310 | ||
| 1553DBK | Hammond Manufacturing | 1553D LRG SOFT TOUCH CASE BK RoHS : Compliant |
| 1,321 | ||
| 2271553-1 | TE Connectivity | Connectors RoHS : Compliant |
| 815 | ||
| 1553BRDBK | Hammond Manufacturing | 1553B IN RED ABS RoHS : Compliant |
| 751 | ||
| 1553BTBUBKBAT | Hammond Manufacturing | 1553B IN TRANS BLUE ABS RoHS : Compliant |
| 636 | ||
| 1-5535676-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 370 | ||
| 15536002 | Hartmann Electronic | AERO RELAY/CONTACTOR 15536002 |
| 298 | ||
| 1553TGYBAT | Hammond Manufacturing | 1553 SOFT TOUCH CASE BAT RoHS : Compliant |
| 275 | ||
| B-155-3801 | TE Connectivity | Connectors RoHS : Compliant |
| 191 | ||
| 1553CXBK | Hammond Manufacturing | 1553CX SOFT TOUCH CASE 2-PANEL RoHS : Compliant |
| 73 | ||
| 4-1415536-2 | TE Connectivity | Relays RoHS : Compliant |
| 46 | ||
| 1-1415538-4 | TE Connectivity | Relays RoHS : Compliant |
| 11 | ||
| 6-1415537-1 | TE Connectivity | Relays RoHS : Compliant |
| 9 | ||
| SC1553A100 | Hammond Manufacturing | SC1553A - PKG OF 100 SCREWS |
| 3 | ||
![]() Chip 1 Exchange | 501951-5530 | Molex | INSTOCK | 18,200 | ||
| 7-1415538-8 | TE Connectivity | INSTOCK RoHS : Compliant | 15,710 | |||
| C1553ALNAK | Bulgin | INSTOCK | 6,630 | |||
| 3-1415532-1 | TE Connectivity | INSTOCK | 6,500 | |||
| B-155-3807-CS4143 | TE Connectivity | INSTOCK | 4,550 | |||
| 5-1415539-3 | TE Connectivity | INSTOCK RoHS : Compliant | 4,482 | |||
| 1553210001- | Molex | INSTOCK | 4,170 | |||
| 4-1415536-2 | TE Connectivity | INSTOCK RoHS : Compliant | 3,798 | |||
| 1553219007- | Molex | INSTOCK | 3,385 | |||
| 1-1415538-4 | TE Connectivity | INSTOCK RoHS : Compliant | 3,250 | |||
| 223893115538- | YAGEO Corporation | INSTOCK | 2,323 | |||
| P1553AB | INSTOCK | 380 | ||||
| L-1553IDT | Kingstate Electronics Corporation | INSTOCK | 191 | |||
| LTC1553CG | Analog Devices Inc | INSTOCK RoHS : Not Compliant | 82 | |||
| DS1553WP-150 | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 16 | |||
![]() Avnet Abacus | 8-1415537-0 | TE Connectivity | Safety Relay 24 VDC 4PSTNO DPSTNC SR6 Series Through Hole 8 A Solder (Alt: 8-1415537-0) RoHS : Compliant | 3,470 | ||
| 8-1415536-7 | TE Connectivity | General Purpose Relay 41083 Series Power Non Latching SPSTNO 12 VDC 16 A (Alt: 8-1415536-7) RoHS : Compliant | 3,300 | |||
| 1-1415536-9 | TE Connectivity | Power Relay SPSTNO 12 VDC 16 A RT1 Series Through Hole Non Latching (Alt: 1-1415536-9) RoHS : Compliant | 2,380 | |||
| 3-1415535-7 | TE Connectivity | (Alt: 3-1415535-7) RoHS : Compliant | 1,500 | |||
| 6-1415537-5 | TE Connectivity | Power Relay SR6 Series (Alt: 6-1415537-5) RoHS : Compliant | 70 | |||
| 761553608 | Molex | (Alt: 761553608) RoHS : Compliant | 0 | |||
| 1415539-5 | TE Connectivity | TE RT314A24WG (Alt: 1415539-5) RoHS : Compliant | 0 | |||
| 1415539-5 | TE Connectivity | TE RT314A24WG (Alt: 1415539-5) RoHS : Compliant | 0 | |||
| 1553361111 | Weidmüller Interface GmbH & Co. KG | WDM1553361111 (Alt: 1553361111) RoHS : Compliant | 0 | |||
| 1-5536280-1 | TE Connectivity | Conn Backplane M 240 POS 127mm Solder ST ThruHole (Alt: 1-5536280-1) RoHS : Compliant | 0 | |||
| 2-1415538-8 | TE Connectivity | (Alt: 2-1415538-8) RoHS : Compliant | 0 | |||
| 4-1415536-2 | TE Connectivity | (Alt: 4-1415536-2) RoHS : Compliant | 0 | |||
| 7-1415534-7 | TE Connectivity | Electromechanical Relay SPSTNO 16A 12VDC 360Ohm Through Hole (Alt: 7-1415534-7) RoHS : Compliant | 0 | |||
| 7-1415534-7 | TE Connectivity | Electromechanical Relay SPSTNO 16A 12VDC 360Ohm Through Hole (Alt: 7-1415534-7) RoHS : Compliant | 0 | |||
| 6-1415538-2 | TE Connectivity | (Alt: 6-1415538-2) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 6-1415537-1 | TE Connectivity | (Alt: 6-1415537-1) RoHS : Compliant | 0 | ||
| M39014/01-1553V | Kyocera AVX Components | Multilayer Ceramic Capacitor, 0.1 uF, 50 V, ? 10%, Radial Leaded, X7R, 5.08 mm (Alt: M39014/01-1553V) RoHS : Not Compliant | 0 | |||
| 3-1415535-7 | TE Connectivity | (Alt: 3-1415535-7) RoHS : Compliant |
| 0 | ||
| GLN1553-45 | iNRCORE LLC | (Alt: GLN1553-45) RoHS : Compliant | 0 | |||
| 31-5539-1010 | Amphenol Corporation | RF / Coaxial Connector, BNC Coaxial, Straight Bulkhead Jack, Through Hole, 50 ohm, Phosphor Bronze (Alt: 31-5539-1010) RoHS : Compliant | 0 | |||
| DGL1553-45 | iNRCORE LLC | TRANSFORMER,MIL PBC (Alt: DGL1553-45) RoHS : Not Compliant | 0 | |||
| SMQ1553-45 | iNRCORE LLC | (Alt: SMQ1553-45) RoHS : Compliant | 0 | |||
| DTLN1553-45 | iNRCORE LLC | TRANSFORMER PBC (Alt: DTLN1553-45) RoHS : Not Compliant | 0 | |||
| 6-1415537-5 | TE Connectivity | Power Relay, SR6 Series (Alt: 6-1415537-5) RoHS : Compliant | 0 | |||
| SI1553CDL-T1-GE3 | Vishay Intertechnologies | (Alt: SI1553CDL-T1-GE3) RoHS : Compliant | 0 | |||
| 7-1415537-6 | TE Connectivity | Electromechanical Relay 4PST-NO/DPST-NC 8A 12VDC 180Ohm Through Hole (Alt: 7-1415537-6) RoHS : Compliant | 0 | |||
| DTL1553-45 | iNRCORE LLC | TRANSFORMER,MIL PBC (Alt: DTL1553-45) RoHS : Not Compliant | 0 | |||
| M39014/01-1553 | KEMET Corporation | Multilayer Ceramic Capacitor, 0.1 uF, 50 V, ? 10%, Radial Leaded, BX, 5.08 mm, 4.83 mm, 2.29 mm (Alt: M39014/01-1553) RoHS : Not Compliant | 0 | |||
| 8-1415537-0 | TE Connectivity | Safety Relay, 24 VDC, 4PST-NO, DPST-NC, SR6 Series, Through Hole, 8 A, Solder (Alt: 8-1415537-0) RoHS : Compliant | 0 | |||
| 7-1415537-8 | TE Connectivity | (Alt: 7-1415537-8) RoHS : Compliant | 0 | |||
![]() Avnet Silica | HD1-15530-8 | Renesas Electronics Corporation | (Alt: HD1-15530-8) RoHS : Not Compliant | 0 | ||
| CORE1553BRM-OM | Microchip Technology Inc | IP Module Core1553BRM License (Alt: CORE1553BRM-OM) RoHS : Not Compliant | 0 | |||
| CORE1553BRT-OM | Microchip Technology Inc | CORE (Alt: CORE1553BRT-OM) RoHS : Not Compliant | 0 | |||
| F15538_JENNY-20 | LEDIL | Lens Silicone Clear 20 Beam Pin Fastening Box (Alt: F15538_JENNY-20) RoHS : Compliant | 0 | |||
| F15539_JENNY-40 | LEDIL | Round LED Lens 35mm x 35mm Silicone Clear Box (Alt: F15539_JENNY-40) RoHS : Compliant | 0 | |||
| C11553_BARBARA-W | LEDIL | Reflector Is Made Of Aluminum Coated PC (Alt: C11553_BARBARA-W) RoHS : Compliant | 0 | |||
| CORE1553BRT-OMFL | Microchip Technology Inc | IP Module Core1553BRT License (Alt: CORE1553BRT-OMFL) RoHS : Not Compliant | 0 | |||
| GN3155-3EA3AA6E3 | Semtech Corporation | SR Super High Gain Rchip 113Gbps 33V SFP (Alt: GN3155-3EA3AA6E3) RoHS : Compliant | 0 | |||
| CORE1553-DEV-KIT-2 | Microchip Technology Inc | Core1553 Actel FPGA Development Kit (Alt: CORE1553-DEV-KIT-2) RoHS : Compliant | 0 | |||
| S4507932P1553 (ALS) | Sanmina Corporation | (Alt: S4507932P1553) RoHS : Not Compliant | 0 | |||
![]() DB Roberts | M2155-3005-S-12 | RAF Electronic Hardware |
| 219 | ||
| 15536 | Heyco | HPLPA 250-098 NATURAL | 0 | |||
| 52-15-53-4-000 | Southco | Captive fastening in tight spaces is no problem with the reduced footprint of these Miniature Series captive screws. Combination tool-head recesses and knurled screw options provide lots of versatility for fastening/unfastening by hand or with tools. | 0 | |||
| 47-15-532-14 | Southco | 0 | ||||
| 15534B | Heyco | HPLPA 250-079 BLACK | 0 | |||
| C2-42-155-3 | Southco | C2-42-155-3 | 0 | |||
| NTA15535WPM | Essentra Components | CABLE TIE, PUSH MOUNT, 6.10 LO | 0 | |||
| 15532B | Heyco | HPLPA 201-098 BLACK | 0 | |||
| C2-43-155-3 | Southco | C2-43-155-3 | 0 | |||
| 461553 | Essentra Components | 0 | ||||
| 51553 | Pop Rivets | AD620SS 001-5C | 0 | |||
| 2155-3005-SS | RAF Electronic Hardware | 0 | ||||
| RCR111553A | Essentra Components | 75 X 50MM RECT TUBE GLIDE TEXT | 0 | |||
| 15530B | Heyco | HPLPA 201-079 BLACK | 0 | |||
| M2155-3005-AL | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | SI1553CDL-T1-GE3 | Vishay Intertechnologies | (Alt: SI1553CDL-T1-GE3) RoHS : Compliant | 18,000 | ||
| CORE1553-SA | Microchip Technology Inc | CORE1553 Daughter Card (Alt: CORE1553-SA) RoHS : Compliant | 0 | |||
| CORE1553BRM-OM | Microchip Technology Inc | IP Module Core1553BRM License (Alt: CORE1553BRM-OM) RoHS : Not Compliant | 0 | |||
| CORE1553BRT-RM | Microchip Technology Inc | IP Module Core1553BRT License (Alt: CORE1553BRT-RM) RoHS : Not Compliant | 0 | |||
| CORE1553BBC-AR | Microchip Technology Inc | (Alt: CORE1553BBC-AR) RoHS : Not Compliant | 0 | |||
| CORE1553BRT-OM | Microchip Technology Inc | CORE (Alt: CORE1553BRT-OM) RoHS : Not Compliant | 0 | |||
| CORE1553BRM-RM | Microchip Technology Inc | Embedded IP Core (Alt: CORE1553BRM-RM) RoHS : Not Compliant | 0 | |||
| CORE1553BRT-AN | Microchip Technology Inc | Core1553BRT MilSTD1553B Remote Terminal (Alt: CORE1553BRT-AN) RoHS : Not Compliant | 0 | |||
| F15538_JENNY-20 | LEDIL | Lens Silicone Clear 20 Beam Pin Fastening Box (Alt: F15538_JENNY-20) RoHS : Compliant | 0 | |||
| F15539_JENNY-40 | LEDIL | Round LED Lens 35mm x 35mm Silicone Clear Box (Alt: F15539_JENNY-40) RoHS : Compliant | 0 | |||
| C11553_BARBARA-W | LEDIL | Reflector Is Made Of Aluminum Coated PC (Alt: C11553_BARBARA-W) RoHS : Compliant | 0 | |||
| CORE1553BRT-OMFL | Microchip Technology Inc | IP Module Core1553BRT License (Alt: CORE1553BRT-OMFL) RoHS : Not Compliant | 0 | |||
| CORE1553-DEV-KIT | Microchip Technology Inc | Development Kit Allows Users To Evaluate The Functionality Of Core1553BRM (Alt: CORE1553-DEV-KIT) RoHS : Compliant | 0 | |||
| CORE1553BRT-EBR-AR | Microchip Technology Inc | (Alt: CORE1553BRT-EBR-AR) RoHS : Not Compliant | 0 | |||
| CORE1553-DEV-KIT-2 | Microchip Technology Inc | Core1553 Actel FPGA Development Kit (Alt: CORE1553-DEV-KIT-2) RoHS : Compliant | 0 | |||
![]() Master Electronics | 25.130.1553.0 | Wieland Electric GmbH | Conn Cage Clamp Terminal Block 15 POS 5mm Solder ST Thru-Hole 15A RoHS : Compliant |
| 100 | |
| 1.14.001.553/0000 | RAFI GmbH & Co Kg | RACON 12 i - Tactile switch solder terminals for PCB yellow RoHS : Compliant |
| 0 | ||
| 2-1415538-8 | TE Connectivity | V23047-A1015-A501 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 4-1415536-2 | TE Connectivity | RTHH4012WG RoHS : Compliant |
| 0 | ||
| 155301-1023 | ITT Interconnect Solutions | MKJ0C7W6-7DY; Trinity MKJ; Circular RoHS : Not Compliant |
| 0 | ||
| 155302-1022 | ITT Interconnect Solutions | MKJ0C7W7-10CY / 155302-1022 / Circular RoHS : Not Compliant |
| 0 | ||
| 155303-1021 | ITT Interconnect Solutions | MKJ0C7W9-19DY RoHS : Not Compliant |
| 0 | ||
| 155304-1020 | ITT Interconnect Solutions | MKJ0C7W12-37BY / 155304-1020 / Circular RoHS : Not Compliant |
| 0 | ||
| 155320-0030 | ITT Interconnect Solutions | Connector Bayonet Coupling Socket 3 Position Crimp Straight Cable Mount 3 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 155321-1001 | ITT Interconnect Solutions | Conn Circular PIN 4 POS Crimp ST Cable Mount 4 Terminal 1 Port Automotive Medical RoHS : Not Compliant |
| 0 | ||
| 155322-1000 | ITT Interconnect Solutions | Conn Circular SKT 10 POS Crimp ST Cable Mount 10 Terminal 1 Port Automotive Medical RoHS : Not Compliant |
| 0 | ||
| 155323-1531 | ITT Interconnect Solutions | MKJ3A6W9-4PZ RoHS : Not Compliant |
| 0 | ||
| 155330-0020 | ITT Interconnect Solutions | Connector Bayonet Coupling Socket 3 Position Crimp Straight Cable Mount 3 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 155333-1521 | ITT Interconnect Solutions | MKJ3B6F9-19SZ; Trinity MKJ; Circular RoHS : Not Compliant |
| 0 | ||
| 155341-2033 | ITT Interconnect Solutions | Connector Bayonet Coupling Socket 7 Position Crimp Straight Jam Nut 7 Terminal 1 Port RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1553DBK | Hammond Manufacturing | Enclosures, Boxes, & Cases Handheld RoHS : Compliant |
| 50 | |
| 1553TGYBAT | Hammond Manufacturing | Enclosure,Tee,Handheld,UL94V-0,Gray,8.27x3.94x1.26 In,Soft Side,1553T Series RoHS : Compliant |
| 50 | ||
| 1553BTBUBKBAT | Hammond Manufacturing | Enclosures, Boxes, & Cases Handheld+Battery/ABS 4.62x3.11" ClearBlue RoHS : Compliant |
| 50 | ||
| 1553CXBK | Hammond Manufacturing | Enclosures, Boxes, & Cases 1553CX SOFT TOUCH CASE 2-PANEL RoHS : Compliant |
| 50 | ||
| 1553DBKBAT | Hammond Manufacturing | Enclosures, Boxes, & Cases Handheld+Battery/ABS 5.8x3.5x0.98" Black RoHS : Compliant |
| 50 | ||
| 1553WDBK | Hammond Manufacturing | Enclosures, Boxes, & Cases RoHS : Compliant |
| 50 | ||
| 1553190 | Phoenix Contact | Circular Metric Connectors SACC-M12MS-5CON -PG 9-VA RoHS : Compliant |
| 50 | ||
| 1553271 | Phoenix Contact | Circular Metric Connectors SACC-M12FS-5CON -PG 9-VA RoHS : Compliant |
| 50 | ||
| 1553640 | Phoenix Contact | Circular Metric Connectors SACC-M12FS-8Q SH BUS SYSTEM RoHS : Compliant |
| 50 | ||
| 1553BBKBKBAT | Hammond Manufacturing | Enclosures for Single Board Computing RoHS : Compliant |
| 50 | ||
| 1553064 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-3P-M 8MS/ 5,0- PUR/M8FR-2L RoHS : Compliant |
| 25 | ||
| 1553019 | Phoenix Contact | Circular Metric Connectors SACC-DSI-FS-5 CON-L180/SCO SH RoHS : Compliant |
| 18 | ||
| 1553 BL001 | Alpha Wire | Hook-up Wire 20AWG 10/30 PVC 1000ft SPOOL BLUE |
| 14 | ||
| 1553 OR001 | Alpha Wire | Hook-up Wire 20AWG 10/30 PVC 1000ft SPOOL ORANGE |
| 2 | ||
| 1553307 | Phoenix Contact | Circular Metric Connectors SACC-M12FR-5CON -PG 9-VA RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C1553/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated BNC Male to N Male Low Loss Cable 12 Inch Length Using LMR-195-FR Coax with HeatShrink., Radio frequency assembly fire rated BNC male to N male low loss cable 12 inch length using LMR-195-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to N male low loss cable 12 inch length using LMR-195-FR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a type N cable connection on the other. Our low loss BNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1553/HS-12 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1553/HS-12 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Our BNC male to type N male cable has a maximum VSWR of 1.4:1. BNC plug to type N plug cable assembly PE3C1553/HS-12 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1553/HS-12 can also be used in the other direction and will be a type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 4,139 | |
| PE3C1553/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated BNC Male to N Male Low Loss Cable 24 Inch Length Using LMR-195-FR Coax with HeatShrink., Radio frequency assembly fire rated BNC male to N male low loss cable 24 inch length using LMR-195-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to N male low loss cable 24 inch length using LMR-195-FR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a type N cable connection on the other. Our low loss BNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1553/HS-24 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1553/HS-24 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Our BNC male to type N male cable has a maximum VSWR of 1.4:1. BNC plug to type N plug cable assembly PE3C1553/HS-24 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1553/HS-24 can also be used in the other direction and will be a type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 2,351 | ||
| PE3C1553/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated BNC Male to N Male Low Loss Cable 48 Inch Length Using LMR-195-FR Coax with HeatShrink., Radio frequency assembly fire rated BNC male to N male low loss cable 48 inch length using LMR-195-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to N male low loss cable 48 inch length using LMR-195-FR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a type N cable connection on the other. Our low loss BNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1553/HS-48 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1553/HS-48 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Our BNC male to type N male cable has a maximum VSWR of 1.4:1. BNC plug to type N plug cable assembly PE3C1553/HS-48 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1553/HS-48 can also be used in the other direction and will be a type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,175 | ||
| PE3C1553/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated BNC Male to N Male Low Loss Cable 60 Inch Length Using LMR-195-FR Coax with HeatShrink., Radio frequency assembly fire rated BNC male to N male low loss cable 60 inch length using LMR-195-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to N male low loss cable 60 inch length using LMR-195-FR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a type N cable connection on the other. Our low loss BNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1553/HS-60 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1553/HS-60 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Our BNC male to type N male cable has a maximum VSWR of 1.4:1. BNC plug to type N plug cable assembly PE3C1553/HS-60 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1553/HS-60 can also be used in the other direction and will be a type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 940 | ||
| PE3W01553 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MHV, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. MHV Female Bulkhead to MHV Female Bulkhead Cable Using RG223 Coax., Radio frequency assembly MHV female bulkhead to MHV female bulkhead cable using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHV female bulkhead to MHV female bulkhead cable using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHV to MHV cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MHV bulkhead cable connection on one end and a MHV bulkhead cable connection on the other. Our MHV to MHV cable assembly has a female gender on end 1 and a female on end 2. PE3W01553 can also be known as a MHV jack to MHV jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01553 RF cable has a PVC jacket of 0.210-inch diameter. The flexible RF cable has an in-series connection. MHV jack to MHV jack cable assembly PE3W01553 is built with RG223 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. MHV jack bulkhead to MHV jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHV to MHV RF cable assembly as per your requirements. | 120 | |||
| PE3W01553-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MHV, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MHV Female Bulkhead to MHV Female Bulkhead Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly MHV female bulkhead to MHV female bulkhead cable 12 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHV female bulkhead to MHV female bulkhead cable 12 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHV to MHV cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MHV bulkhead cable connection on one end and a MHV bulkhead cable connection on the other. Our MHV to MHV cable assembly has a female gender on end 1 and a female on end 2. PE3W01553-12 can also be known as a MHV jack to MHV jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01553-12 RF cable has a PVC jacket of 0.210-inch diameter. The flexible RF cable has an in-series connection. MHV jack to MHV jack cable assembly PE3W01553-12 is built with RG223 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. MHV jack bulkhead to MHV jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHV to MHV RF cable assembly as per your requirements. |
| 24 | ||
| PE3W01553-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MHV, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. MHV Female Bulkhead to MHV Female Bulkhead Cable 72 Inch Length Using RG223 Coax., Radio frequency assembly MHV female bulkhead to MHV female bulkhead cable 72 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHV female bulkhead to MHV female bulkhead cable 72 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHV to MHV cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MHV bulkhead cable connection on one end and a MHV bulkhead cable connection on the other. Our MHV to MHV cable assembly has a female gender on end 1 and a female on end 2. PE3W01553-72 can also be known as a MHV jack to MHV jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01553-72 RF cable has a PVC jacket of 0.210-inch diameter. The flexible RF cable has an in-series connection. MHV jack to MHV jack cable assembly PE3W01553-72 is built with RG223 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. MHV jack bulkhead to MHV jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHV to MHV RF cable assembly as per your requirements. |
| 24 | ||
| PE3W15536-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to QMA Male Right Angle Low Loss Cable 24 Inch Length Using PE-P195 Coax., Radio frequency assembly SMA male to QMA male right angle low loss cable 24 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to QMA male right angle low loss cable 24 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle QMA cable connection on the other. Our low loss SMA to right angle QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W15536-24 can also be known as a low loss SMA plug to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15536-24 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our SMA male to right angle QMA male cable has a maximum VSWR of 1.4:1. SMA plug to QMA plug cable assembly PE3W15536-24 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle QMA cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15536-24 can also be used in the other direction and will be a right angle QMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to QMA cable assembly for quick shipment worldwide. Variations of SMA and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to QMA low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15536-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to QMA Male Right Angle Low Loss Cable 36 Inch Length Using PE-P195 Coax., Radio frequency assembly SMA male to QMA male right angle low loss cable 36 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to QMA male right angle low loss cable 36 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle QMA cable connection on the other. Our low loss SMA to right angle QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W15536-36 can also be known as a low loss SMA plug to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15536-36 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our SMA male to right angle QMA male cable has a maximum VSWR of 1.4:1. SMA plug to QMA plug cable assembly PE3W15536-36 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle QMA cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15536-36 can also be used in the other direction and will be a right angle QMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to QMA cable assembly for quick shipment worldwide. Variations of SMA and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to QMA low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W21553 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.4mm Female Bulkhead to 2.4mm Female Bulkhead Cable Using PE-P086HF Coax. PE3W21553 is a 2.4mm female bulkhead to 2.4mm female bulkhead cable using PE-P086HF coax. This Pasternack 2.4mm female bulkhead to 2.4mm female bulkhead cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.4mm for connector 2. Our female 2.4mm bulkhead to female 2.4mm bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21553 2.4mm female bulkhead to 2.4mm female bulkhead cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3W15534 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. N Female to BNC Female Cable Using RG213 Coax. PE3W15534 is a N female to BNC female cable using RG213 coax. This Pasternack N female to BNC female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our female N to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15534 N female to BNC female cable assembly is constructed with RG213 coax. | 0 | |||
| PE3W15538LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to N Female Cable Using RG316 Coax with HeatShrink, LF Solder. PE3W15538LF/HS is a SMA male to N female cable using RG316 coax. This Pasternack SMA male to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15538LF/HS SMA male to N female cable assembly is constructed with RG316 coax. | 0 | |||
| PE34155-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to N Female Bulkhead Cable 36 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male to N female bulkhead cable 36 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 36 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE34155-36, can also be known as a SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to N type jack cable assembly PE34155-36 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34155-36 can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 36 inch length using PE-SR405AL coax. |
| 0 | ||
| PE3W15532 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. White FAKRA Jack to FAKRA Plug Cable Using RG316 Coax. PE3W15532 is a FAKRA jack to FAKRA plug cable using RG316 coax. This Pasternack FAKRA jack to FAKRA plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack FAKRA to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15532 FAKRA jack to FAKRA plug cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W15531 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. QMA Female Bulkhead to SMA Male Right Angle Cable Using PE-SR402AL Coax. PE3W15531 is a QMA female bulkhead to SMA male right angle cable using PE-SR402AL coax. This Pasternack QMA female bulkhead to SMA male right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. QMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female QMA bulkhead to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W15531 QMA female bulkhead to SMA male right angle cable assembly is constructed with PE-SR402AL coax. | 0 | |||
![]() TE Connectivity | B-155-3802 | TE Connectivity | B-155-3802 Operating Temperature (Max): 125 °C Operating Temperature (Max): 257 °F Expanded Inside Diameter (Min): 1.91 mm Expanded Inside Diameter (Min): .075 in Recovered Inside Diameter (Max): 1.14 mm Solder Sleeve Shield Terminator | Max Temp: 125 °C 257 °F | Part Number: B-155-3802 | Internal Number: D26022-000 | Alias Number: 1201999-1 | 1.91 mm | TE Connectivity RoHS : Compliant |
| 4,210 | |
| 5102155-3 | TE Connectivity | A/L UNIV HDR 16P VERT Connector System: Wire-to-Board Number of Positions: 16 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: With Wire-to-Board 16 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5102155-3 | Internal Number: 5102155-3 | TE Connectivity RoHS : Compliant |
| 1,546 | ||
| 8-1415537-0 | TE Connectivity | SR6B6K24 Relay & Contactor Type: Force-Guided Relay Coil Magnetic System: Monostable Contact Arrangement: 4A (NO) + 2B (NC) Contact Current Rating: 8 A Coil Voltage Rating: 24 VDC Force-Guided Relay Monostable 4A (NO) + 2B (NC) 8 A | Force Guided Relay With 6 Contact | Part Number: 8-1415537-0 | Internal Number: 8-1415537-0 | Alias Number: SR6B6K24 | TE Connectivity RoHS : Compliant |
| 1,086 | ||
| 6-1415537-5 | TE Connectivity | SR6A6K24 Relay & Contactor Type: Force-Guided Relay Coil Magnetic System: Monostable Contact Arrangement: 3A (NO) + 3B (NC) Contact Current Rating: 8 A Coil Voltage Rating: 24 VDC Force-Guided Relay Monostable 3A (NO) + 3B (NC) 8 A | Force Guided Relay With 6 Contact | Part Number: 6-1415537-5 | Internal Number: 6-1415537-5 | Alias Number: SR6A6K24 | TE Connectivity RoHS : Compliant |
| 1,078 | ||
| 8-1415536-7 | TE Connectivity | 0410 83 050 001WG Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form X SPST-NO-DM Contact Current Rating: 16 A General Purpose Power Relay DC Monostable 1 Form X SPST-NO-DM | Electromechanical Relay | Part Number: 8-1415536-7 | Internal Number: 8-1415536-7 | Alias Number: 41083050001WG | TE Connectivity RoHS : Compliant |
| 767 | ||
| 1-5530843-8 | TE Connectivity | CONN SEC II 30 POS 100C/L Connector System: Board-to-Board Number of Positions: 60 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in Contact Current Rating (Max): 3 A Board-to-Board 60 2.54 mm .1" | Card Edge Power Connector | Part Number: 1-5530843-8 | Internal Number: 1-5530843-8 | TE Connectivity RoHS : Compliant |
| 614 | ||
| 1-55323-0 | TE Connectivity | 10 POWER TAP ASSY .125 Power Terminal Type: Power Tap Terminal Number of Positions: 10 Contact Current Rating (Max): 25 A Product Terminates To: Printed Circuit Board Centerline (Pitch): 3.18 mm Power Tap Terminal 10 25 A Printed Circuit Board | Power Terminal | Part Number: 1-55323-0 | Internal Number: 1-55323-0 | 3.18 mm | TE Connectivity RoHS : Compliant |
| 352 | ||
| 3-1415535-7 | TE Connectivity | REL34024 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 5 A General Purpose Power Relay DC Monostable 1 Form A SPST-NO | Electromechanical Relay | Part Number: 3-1415535-7 | Internal Number: 3-1415535-7 | Alias Number: REL34024 | TE Connectivity RoHS : Compliant |
| 286 | ||
| 1-5530843-0 | TE Connectivity | CONN SEC II 43 POS 100C/L Connector System: Board-to-Board Number of Positions: 86 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in Contact Current Rating (Max): 3 A Board-to-Board 86 2.54 mm .1" | Card Edge Power Connector | Part Number: 1-5530843-0 | Internal Number: 1-5530843-0 | TE Connectivity RoHS : Compliant |
| 126 | ||
| 5-1415539-3 | TE Connectivity | PTML0060 Product Mount Type: Socket Mount Relay Accessory Type: Accessory LED Module Socket Mount Accessory | Relay Accessories | Part Number: 5-1415539-3 | Internal Number: 5-1415539-3 | Alias Number: PTML0060 | TE Connectivity RoHS : Compliant |
| 101 | ||
| 1-5530841-1 | TE Connectivity | CONN SEC II 50 POS 100C/L Connector System: Board-to-Board Number of Positions: 50 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in Contact Current Rating (Max): 3 A Board-to-Board 50 2.54 mm .1" | Card Edge Power Connector | Part Number: 1-5530841-1 | Internal Number: 1-5530841-1 | TE Connectivity RoHS : Compliant |
| 35 | ||
| 8-1415534-9 | TE Connectivity | PT2L7LC4 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 12 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: 8-1415534-9 | Internal Number: 8-1415534-9 | Alias Number: PT2L7LC4 | TE Connectivity RoHS : Compliant |
| 14 | ||
| 1415535-9 | TE Connectivity | PT5L7LC4 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 4 Form C 4PDT-CO Contact Current Rating: 6 A General Purpose Power Relay DC Monostable 4 Form C 4PDT-CO | Electromechanical Relay | Part Number: 1415535-9 | Internal Number: 1415535-9 | Alias Number: PT5L7LC4 | TE Connectivity RoHS : Compliant |
| 13 | ||
| 8-1415534-7 | TE Connectivity | PT2L7LB2 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 12 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: 8-1415534-7 | Internal Number: 8-1415534-7 | Alias Number: PT2L7LB2 | TE Connectivity RoHS : Compliant |
| 12 | ||
| 1-1415535-3 | TE Connectivity | PT5L7SB5 Relay & Contactor Type: General Purpose Power Relay Current Type: AC Coil Magnetic System: Monostable Contact Arrangement: 4 Form C 4PDT-CO Contact Current Rating: 6 A General Purpose Power Relay AC Monostable 4 Form C 4PDT-CO | Electromechanical Relay | Part Number: 1-1415535-3 | Internal Number: 1-1415535-3 | Alias Number: PT5L7SB5 | TE Connectivity RoHS : Compliant |
| 3 | ||
![]() Vyrian | 4-1415539-8 | TE Connectivity | Power/Signal Relay, 1 Form C, 0.033A (Coil), 12VDC (Coil), 400mW (Coil), 16A (Contact), 300VDC (Contact), DC Input, Panel Mount RoHS : Compliant | 12,176 | ||
| 1553019 | Phoenix Contact | Circular Connector, 5 Contact(s), Zinc Alloy, Female, Solder Terminal, Socket RoHS : Compliant | 12,135 | |||
| 1553271 | Phoenix Contact | Circular Connector, 5 Contact(s), Female, Screw Terminal, Socket RoHS : Compliant | 11,988 | |||
| XF2B-6155-31A | OMRON Corporation | FFC/FPC Connector, 61 Contact(s), 1 Row(s), Female, Straight, 0.012 inch Pitch, Solder Terminal, Locking, Natural Insulator RoHS : Compliant | 11,420 | |||
| 1553190 | Phoenix Contact | Circular Connector, 5 Contact(s), Male, Screw Terminal RoHS : Compliant | 9,707 | |||
| 5962-9155301MLX | Texas Instruments | Registered Bus Transceiver, BCT/FBT Series, 1-Func, 8-Bit, True Output, BICMOS, CDFP24 | 9,095 | |||
| FS155-30T | Littelfuse Inc | Solid State Module | 7,955 | |||
| 1553226 | Phoenix Contact | Circular Connector, 4 Contact(s), Male, Screw Terminal, Plug RoHS : Compliant | 7,695 | |||
P1553ABL60RP![]() | Littelfuse Inc | Silicon Surge Protector, 30A RoHS : Compliant | 4,859 | |||
| 3-1415535-8 | TE Connectivity | Power/Signal Relay, 1 Form A, SPST, Momentary, 0.008A (Coil), 48VDC (Coil), 360mW (Coil), 5A (Contact), DC Input, AC Output, Panel Mount RoHS : Compliant | 4,429 | |||
| 6-1415537-2 | TE Connectivity | Power/Signal Relay, 0.053A (Coil), 15VDC (Coil), 800mW (Coil), 8A (Contact), Panel Mount RoHS : Compliant | 4,131 | |||
| COM1553BHR | Microchip Technology Inc | Serial IO/Communication Controller, MOS, CDIP40 RoHS : Not Compliant | 2,628 | |||
| 25.640.1553.0 | Wieland Electric | Modular Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) | 693 | |||
| SMQ1553-70 | Pulse Electronics Corporation | Pulse Transformer, GENERAL PURPOSE Application(s), 1CT:3CT; 1CT:2.15CT | 514 | |||
| Q1553-20 | Pulse Specialty Components | Pulse Transformer, GENERAL PURPOSE Application(s), 1:1.41 | 319 | |||
![]() Win Source Electronics | SI1553CDL-T1-GE3 | Vishay Huntington | MOSFET N/P-CH 20V SC70-6 |
| 28,000 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |