 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
1394-1044-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
 Coilcraft Direct | CM1394LC | Coilcraft Inc | Common mode choke, IEEE1394, SMT, RoHS RoHS : Compliant |
| 3,570 | |
| MSS5131-394MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 1,694 | ||
| MSS5121-394MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 414 | ||
| PCV-1-394-05L | Coilcraft Inc | Power inductor, 10% tol, RoHS RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | DS1394U-33+T&R | Analog Devices Inc | DS1394 Series 3.3 V Surface Mount Low-Voltage SPI/3-Wire RTCs - uSOP-10 RoHS : Compliant | 2,999 | ||
 Richardson RFPD | G3R01R013940 | W L Gore & Associates | Microwave/RF Assemblies: 0.290 inch OD cable, stan RoHS : Not Compliant | 0 | ||
| R573413945 | Radiall | RF COAXIAL SWITCH RoHS : Not Compliant | 0 | |||
| SI5344D-D13942-GMR | Skyworks Solutions Inc | 10-Channel, Any-Frequency, Any-Output Jitter Atten RoHS : Compliant | 0 | |||
| SI5395K-A13946-GM | Skyworks Solutions Inc | 12-Channel, Any-Frequency, Any-Output Jitter Atten RoHS : Compliant | 0 | |||
| 22641394 | HUBER+SUHNER | Conn SMA 0Hz to 18GHz 50Ohm ST Flange Mount F Gold RoHS : Compliant |
| 0 | ||
| SI5332HD13940-GM1R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P RoHS : Compliant | 0 | |||
| MASW-010646-13940W | MACOM | RF Switch SPDT 26GHz to 40GHz 29dB 5-Pin Die Waffl RoHS : Compliant |
| 0 | ||
| SI5394D-A13945-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 4 RoHS : Compliant | 0 | |||
| SI5332DD13947-GM2R | Skyworks Solutions Inc | Low Jitter Clock Generator RoHS : Not Compliant | 0 | |||
| LT1394CMS8#TRPBF | Analog Devices Inc | Comparator Single ±6V/12V 8-Pin MSOP T/R RoHS : Compliant |
| 0 | ||
| LT1394IS8#TRPBF | Analog Devices Inc | Comparator Single ±6V/12V 8-Pin SOIC N T/R RoHS : Compliant |
| 0 | ||
| DC1394A | Analog Devices Inc | LT3480EDD DC to DC Converter and Switching Regulat RoHS : Compliant |
| 0 | ||
| SI5332FD11394-GM3 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 48-P RoHS : Compliant | 0 | |||
| LT1394CMS8#PBF | Analog Devices Inc | Comparator Single ±6V/12V 8-Pin MSOP Tube RoHS : Compliant |
| 0 | ||
| SI5332FD11394-GM3R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 48-P RoHS : Compliant | 0 | |||
 Rutronik | Q65113A1394 | ams OSRAM Group | TOPLED BLUE 470NM 355MCD RoHS : Compliant |
| 8,044 | |
 Braemac Americas-Symmetry | ABLS-13.94916MHZ-10-R20-D-T | Abracon Corporation | CRYSTAL 13.94916MHZ 10PF SMD RoHS : Compliant |
| 0 | |
 Chip-Germany GmbH | IEEE1394 | Lumberg Connect GmbH | 80 | |||
 Component Electronics, Inc | 1394RAPC | Switchcraft Conxall | IN STOCK SHIP TODAY RoHS : Not Compliant | 250 | ||
| NA1394-6-W-B | Neutrik USA Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 92 | ||
| 213940-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 75 | ||
| 38-00-1394 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| NA1394-6-W | Neutrik USA Inc | IN STOCK SHIP TODAY |
| 46 | ||
| DS1394U-33+T&R | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 20 | ||
LT1394CS8#PBF | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 15 | ||
| ICS1394M | ICS | IN STOCK SHIP TODAY |
| 12 | ||
| LT1394CS8 | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| A1394 | HAKKO Corporation | IN STOCK SHIP TODAY |
| 2 | ||
| 413940-01 | IN STOCK SHIP TODAY | 1 | ||||
 DB Roberts | 47-61-394-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | ||
| 47-61-394-11 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 01910-11394 | Avdel | MAXLOK COL 1/4 FL ST | 0 | |||
| 47-61-394-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 060113942 | Essentra Components | QUARTER TURN-SPRING LOADED | 0 | |||
| 47-61-394-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| G1394 | Heyco | RG 2000-56-8A | 0 | |||
| 47-91-394-11 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-91-394-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 2139-440-S | RAF Electronic Hardware | 0 | ||||
| 47-91-394-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-91-394-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 1394-6-AL | RAF Electronic Hardware | 0 | ||||
| 1394-8-A-7 | RAF Electronic Hardware | 0 | ||||
| 491394 | Essentra Components | 0 | ||||
 FDH Electronics | GEN 7005-139428 | GENSWISS (GENEVIEVE SWISS INDUSTRIES) | Machine Tooling | 5 | ||
| M85049/139-40D | Glenair Inc | Connector | 0 | |||
| M85049/139-4A | Glenair Inc | Connector | 0 | |||
| M85049/139-4A | Amphenol PCD | Backshells & Ac | 0 | |||
| 84313941 | Crouzet | Circuit Breaker | 0 | |||
| M85049/139-4K | Glenair Inc | Connector | 0 | |||
| M85049/139-40C | Glenair Inc | Connector | 0 | |||
| M85049/139-40K | Glenair Inc | Connector | 0 | |||
| M85049/139-40A | Glenair Inc | Connector | 0 | |||
| M85049/139-40A | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/139-4D | Glenair Inc | Connector | 0 | |||
| M85049/139-4D | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/139-4C | Glenair Inc | Connector | 0 | |||
| M85049/139-4L | Glenair Inc | Connector Acc | 0 | |||
| M85049/139-4L | Amphenol PCD | Backshells & Ac | 0 | |||
 Maritex | 1394511-1 | TE Connectivity | Connectors Accessories; 1394511-1; TE CONNECTIVITY; Yes; White; 1 RoHS : Compliant |
| 5,562 | |
| C11394_TYRA-S | LEDIL | TYRA-S 11394 reflector; spot +-10st; for High Power CREE MP-L series LED; for TYCO LED socket MP-L connector; Ledil; RoHS |
| 42 | ||
 Master Electronics | RCV-00113944 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | |
| 1-448139-4 | TE Connectivity | CNCT SZ 16 PSTD PIN MOQ Reduction RoHS : Compliant |
| 0 | ||
| HTSW-139-42-F-D-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-139-42-G-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-139-42-TM-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FCF8-10-01-L-13.94-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| RCL-00113945 | Carling Technologies | L-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| NBC-R4AC/1-3-94L/R4AC | Phoenix Contact | NBC-R4AC/1 3-94L/R4AC RoHS : Compliant |
| 0 | ||
| RCV-00113947 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| K1139412 | TE Connectivity | Battery Disconnector 35-524-290-R RoHS : Compliant |
| 0 | ||
| LELK11-39433-20 | Sensata Circuit Breakers | Circuit Breaker 2Pole 20A 50kAIC 80Vdc RoHS : Compliant |
| 0 | ||
| 5813942 | TE Connectivity | Push on Wire Marker Legend: Blank 2.0 to 3.2mm Dia Wire White RoHS : Compliant |
| 0 | ||
| R-13946-2 | TE Connectivity | Thick Film Resistors - Smd Stators RoHS : Compliant |
| 0 | ||
| 4607X-101-394LF | Bourns Inc | Array/Network Resistor Bussed Metal Glaze/thick Film 0.88W 390000ohm 100V 2% +/-Tol 100ppm/Cel Through Hole... RoHS : Compliant |
| 0 | ||
| 3-1633139-4 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C4139-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum N Male Right Angle to N Male Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male right angle to N male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male right angle to N male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle N type cable connection on one end and type N cable connection on the other. Our low PIM right angle N type to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3C4139-48, can also be known as a low PIM right angle type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C4139-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with right angle N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N right angle male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4139-48 can also be used in the other direction and will be type N male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM N type right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male right angle to N male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder. |
| 9 | |
| PE3W13944-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. 3.5mm Female Bulkhead to 3.5mm Female Cable Using PE-SR402FLJ Coax in 200CM., Radio frequency assembly 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 200CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 200CM, 3.5mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm bulkhead cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a female gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a female to female coax assembly, PE3W13944-200CM, can also be known as a 3.5mm jack to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to 3.5mm jack cable assembly PE3W13944-200CM is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance. RF specs on this 3.5mm female bulkhead to 3.5mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13944-200CM can also be used in the other direction and will be 3.5mm female to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to 3.5mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 200CM. |
| 3 | ||
| PE3W13944-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 3.5mm Female Bulkhead to 3.5mm Female Cable Using PE-SR402FLJ Coax in 48 Inch., Radio frequency assembly 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 48 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 48 inch, 3.5mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm bulkhead cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a female gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a female to female coax assembly, PE3W13944-48, can also be known as a 3.5mm jack to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to 3.5mm jack cable assembly PE3W13944-48 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance. RF specs on this 3.5mm female bulkhead to 3.5mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13944-48 can also be used in the other direction and will be 3.5mm female to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to 3.5mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 48 inch. |
| 3 | ||
| PE3C1394/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Jack to Reverse Polarity SMA Plug Cable Using RG8X Coax with HeatShrink., Radio frequency assembly reverse polarity SMA jack to reverse polarity SMA plug cable using RG8X coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA jack to reverse polarity SMA plug cable using RG8X coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a jack gender on end 1 and plug on end 2. PE3C1394/HS can also be known as a reverse polarity SMA female to reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA female to reverse polarity SMA male cable assembly PE3C1394/HS is built with RG8X which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity SMA jack to reverse polarity SMA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1394/HS can also be used in the other direction and will be reverse polarity SMA plug to reverse polarity SMA jack cable assembly if the opposite connectivity is required. SMA reverse polarity female to SMA reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA jack to reverse polarity SMA plug cable using RG8X coax with heatshrink. | 0 | |||
| PE3W13943 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Male to BNC Male Cable Using LMR-240-UF Coax. PE3W13943 is a TNC male to BNC male cable using LMR-240-UF coax. This Pasternack TNC male to BNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our male TNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13943 TNC male to BNC male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13942 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Male to N Male Cable Using LMR-240-UF Coax. PE3W13942 is a TNC male to N male cable using LMR-240-UF coax. This Pasternack TNC male to N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13942 TNC male to N male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13945 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using LMR-100-FR Coax. PE3W13945 is a N male right angle to N male cable using LMR-100A-FR coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13945 N male right angle to N male cable assembly is constructed with LMR-100A-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13941 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to TNC Female Cable Using LMR-LW195 Coax. PE3W13941 is a TNC female bulkhead to TNC female cable using LMR-LW195 coax. This Pasternack TNC female bulkhead to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC bulkhead to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13941 TNC female bulkhead to TNC female cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13945/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using LMR-100-FR Coax with HeatShrink. PE3W13945/HS is a N male right angle to N male cable using LMR-100A-FR coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13945/HS N male right angle to N male cable assembly is constructed with LMR-100A-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13947LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-195-UF Coax, LF Solder. PE3W13947LF is a N male to N male right angle cable using LMR-195-UF coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13947LF N male to N male right angle cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C1394/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity SMA Jack to Reverse Polarity SMA Plug Cable 60 Inch Length Using RG8X Coax with HeatShrink., Radio frequency assembly reverse polarity SMA jack to reverse polarity SMA plug cable 60 inch length using RG8X coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA jack to reverse polarity SMA plug cable 60 inch length using RG8X coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a jack gender on end 1 and plug on end 2. PE3C1394/HS-60 can also be known as a reverse polarity SMA female to reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA female to reverse polarity SMA male cable assembly PE3C1394/HS-60 is built with RG8X which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity SMA jack to reverse polarity SMA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1394/HS-60 can also be used in the other direction and will be reverse polarity SMA plug to reverse polarity SMA jack cable assembly if the opposite connectivity is required. SMA reverse polarity female to SMA reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA jack to reverse polarity SMA plug cable 60 inch length using RG8X coax with heatshrink. |
| 0 | ||
| PE3W13940 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to SMA Male Right Angle Cable Using LMR-100A-UF Coax. PE3W13940 is a N male right angle to SMA male right angle cable using LMR-100A-UF coax. This Pasternack N male right angle to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13940 N male right angle to SMA male right angle cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C1394/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Jack to Reverse Polarity SMA Plug Cable 24 Inch Length Using RG8X Coax with HeatShrink., Radio frequency assembly reverse polarity SMA jack to reverse polarity SMA plug cable 24 inch length using RG8X coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA jack to reverse polarity SMA plug cable 24 inch length using RG8X coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a jack gender on end 1 and plug on end 2. PE3C1394/HS-24 can also be known as a reverse polarity SMA female to reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA female to reverse polarity SMA male cable assembly PE3C1394/HS-24 is built with RG8X which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity SMA jack to reverse polarity SMA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1394/HS-24 can also be used in the other direction and will be reverse polarity SMA plug to reverse polarity SMA jack cable assembly if the opposite connectivity is required. SMA reverse polarity female to SMA reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA jack to reverse polarity SMA plug cable 24 inch length using RG8X coax with heatshrink. |
| 0 | ||
| PE3C11394 | Pasternack Enterprises | 0 | ||||
| PE3W13946 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using LMR-100A-UF Coax. PE3W13946 is a N male right angle to N male cable using LMR-100A-UF coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13946 N male right angle to N male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 TE Connectivity | 1394918-3 | TE Connectivity | DUOPLG5.0 BU-STE 3P Connector System: Wire-to-Board Number of Positions: 3 Centerline (Pitch): .197 in Centerline (Pitch): 5 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Wire-to-Board 3 .197" 5 mm | Standard Edge Connector | Part Number: 1394918-3 | Internal Number: 1394918-3 | .197" | TE Connectivity RoHS : Compliant |
| 30,624 | |
| 1394871-1 | TE Connectivity | MQS DICHTSTOPFEN Connector Seal & Plug Type: Sealing Plug Primary Product Color: Black Primary Product Material: PA 66 GF13 Contains Lubricant: No Sealing Plug Black PA 66 GF13 | 3.00Mm - 3.99Mm Diameter Cavity Plug | Part Number: 1394871-1 | Internal Number: 1394871-1 | TE Connectivity RoHS : Compliant |
| 9,490 | ||
| 1394133-1 | TE Connectivity | SWS,AMP MCP 2.8K,CVTY DIA,3.6,BLU Connector Seal & Plug Type: Single Wire Seal (SWS) Primary Product Color: Blue Primary Product Material: Silicone Compatible Insulation Diameter Range: .047 – .062 in Compatible Insulation Diameter Range: 1.2 – 1.6 mm Single Wire Seal (SWS) Blue Silicone .047 – .062" | Part Number: 1394133-1 | Internal Number: 1394133-1 | TE Connectivity RoHS : Compliant |
| 9,140 | ||
| 1761394-1 | TE Connectivity | DUST COVER, SFP, GANGED & STACKED Connector Cover Type: Dust Cover Primary Product Color: Black Primary Product Material: Thermoplastic Operating Temperature (Max): 105 °C Operating Temperature (Max): 221 °F Dust Cover Black | Connector Cap & Cover | Part Number: 1761394-1 | Internal Number: 1761394-1 | Thermoplastic | TE Connectivity RoHS : Compliant |
| 8,877 | ||
| 1394048-1 | TE Connectivity | 12POS MQS REC Nominal Voltage Architecture: 12 V Number of Positions: 12 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Wire-to-Board Mating Tab Width: .64 mm Mqs 0.63Mm Unsealed Connector System | 12 V Housing for Female Terminals Wire-to-Wire | Part Number: 1394048-1 | Internal Number: 1394048-1 | .64 mm | TE Connectivity RoHS : Compliant |
| 4,208 | ||
| 9-1394049-1 | TE Connectivity | COVER F.15P REC-HSG Number of Positions: 15 Primary Product Color: Black Protection & Strain Relief Accessory Type: Cover - Cable Exit Primary Product Material: PA GF Cable Exit Angle: 90 ° Leavyseal Connector Backshell | 15 Black Cover - Cable Exit PA GF | Part Number: 9-1394049-1 | Internal Number: 9-1394049-1 | TE Connectivity RoHS : Compliant |
| 732 | ||
| 9-1394050-1 | TE Connectivity | COVER F.21P REC-HSG Number of Positions: 21 Primary Product Color: Black Protection & Strain Relief Accessory Type: Cover - Cable Exit Primary Product Material: PA GF Cable Exit Angle: 90 ° Leavyseal Connector Backshell | 21 Black Cover - Cable Exit PA GF | Part Number: 9-1394050-1 | Internal Number: 9-1394050-1 | TE Connectivity RoHS : Compliant |
| 612 | ||
| 1-1825139-4 | TE Connectivity | A205P3ZQ04 Contact Current Rating: 5 A Configuration (Pole-Throw): Double Pole - Double Throw Operating Function: (On) Off (On) Number of Positions: 3 Operating Voltage: 28 VDC Toggle Switch | 5 A Double Pole - Double Throw (On) Off (On) 3 | Part Number: 1-1825139-4 | Internal Number: 1-1825139-4 | Alias Number: A205P3ZQ04 | TE Connectivity RoHS : Compliant |
| 476 | ||
| 1825139-4 | TE Connectivity | A203P3ZQ04 Contact Current Rating: 5 A Configuration (Pole-Throw): Double Pole - Double Throw Operating Function: On Off On Number of Positions: 3 Operating Voltage: 28 VDC Toggle Switch | 5 A Double Pole - Double Throw On Off On 3 | Part Number: 1825139-4 | Internal Number: 1825139-4 | Alias Number: A203P3ZQ04 | TE Connectivity RoHS : Compliant |
| 414 | ||
| 1394522-3 | TE Connectivity | MIXED SOCKET HOUSING, 42POS. , Nominal Voltage Architecture: 12 V Number of Positions: 42 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 5.8 mm 2.8 mm 1.6 mm Timer Connector Housing | 12 V 42 Housing for Female Terminals Wire-to-Wire | Part Number: 1394522-3 | Internal Number: 1394522-3 | 5.8 mm | TE Connectivity RoHS : Compliant |
| 155 | ||
 Venkel Ltd. | C1812X7R251-394KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;250V;0.39uF;�10% RoHS : Compliant | 0 | ||
| C1206X7R101-394KNE | VENKEL LTD | Chip Capacitor;1206;X7R;100V;0.39uF;�10% RoHS : Compliant | 0 | |||
| C2225X7R501-394KNE | VENKEL LTD | HV Chip Capacitor;2225;X7R;500V;0.39uF;�10% RoHS : Compliant | 0 | |||
| C1825X7R251-394KNE | VENKEL LTD | HV Chip Capacitor;1825;X7R;250V;0.39uF;�10% RoHS : Compliant | 0 | |||
| C1210X7R251-394KNE | VENKEL LTD | HV Chip Capacitor;1210;X7R;250V;0.39uF;�10% RoHS : Compliant | 0 | |||
| C1825X7R201-394KNE | VENKEL LTD | HV Chip Capacitor;1825;X7R;200V;0.39uF;�10% RoHS : Compliant | 0 | |||
| C1812X7R201-394KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;200V;0.39uF;�10% RoHS : Compliant | 0 | |||
| C1210X7R201-394KNE | VENKEL LTD | HV Chip Capacitor;1210;X7R;200V;0.39uF;�10% RoHS : Compliant | 0 | |||
C1812X7R101-394KNE | VENKEL LTD | Chip Capacitor;1812;X7R;100V;0.39uF;�10% RoHS : Compliant | 0 | |||
C1210X7R101-394JNE | VENKEL LTD | Chip Capacitor;1210;X7R;100V;0.39uF;�5% RoHS : Compliant | 0 | |||
 Vyrian | 1SR139-400T-32 | ROHM Semiconductor | Rectifier Diode, 1 Phase, 1 Element, 1A, 400V V(RRM), Silicon RoHS : Compliant | 13,848 | ||
5962-01-394-3454 | Analog Devices Inc | Mixed Signal Processor, CMOS RoHS : Not Compliant | 11,276 | |||
| 1913947 | Phoenix Contact | Barrier Strip Terminal Block, 4A, 0.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 10,979 | |||
| F313947GFT | Texas Instruments | 9,789 | ||||
ST1394-01SC6 | STMicroelectronics | Terminator, 2-Line, 55ohm, Hybrid, PDSO6 | 9,383 | |||
5962-01-394-0517 | Analog Devices Inc | D/A Converter, 2 Func, CDIP20 RoHS : Not Compliant | 8,947 | |||
| 5962-01-394-9458 | Analog Devices Inc | Operational Amplifier, 2 Func, 2000uV Offset-Max, PDSO8 RoHS : Not Compliant | 7,865 | |||
| 5962-01-051-3940 | Texas Instruments | Jbar-Kbar Flip-Flop, 6-Func, Positive Edge Triggered, TTL, CDIP16 RoHS : Not Compliant | 7,445 | |||
SN74GTLP1394PWRE4 | Texas Instruments | Bus Transceiver, GTLP Series, 1-Func, 2-Bit, Configurable Output, CMOS, PDSO16 RoHS : Compliant | 7,335 | |||
| 6-1394461-4 | TE Connectivity | Circular Connector, 1 Contact(s), Solder Terminal RoHS : Compliant | 6,187 | |||
| 5962-01-394-8417 | Texas Instruments | D Flip-Flop, 8-Func, Positive Edge Triggered, TTL, PDSO20 RoHS : Not Compliant | 4,490 | |||
| 5962-01-394-1568 | AMD Xilinx | Field Programmable Gate Array, 70MHz, 100-Cell, CMOS, CPGA84 | 3,937 | |||
| 5-1394462-5 | TE Connectivity | Interconnection Device RoHS : Compliant | 3,782 | |||
MAX1394ETB | Maxim Integrated Products | ADC, Successive Approximation, 8-Bit, 1 Func, 2 Channel, Serial Access, BICMOS, PDSO10 RoHS : Not Compliant | 113 | |||
| MAX1394MTB-T | Maxim Integrated Products | ADC, Successive Approximation, 8-Bit, 1 Func, 2 Channel, Serial Access, BICMOS, PDSO10 RoHS : Not Compliant | 73 | |||
 Waytek, Inc. | 1394512-1 | TE Connectivity | AMP 6.3 Blue Cable Seal 16-14GA disc way, no repl RoHS : Compliant |
| 31,425 | |
| 1394511-1 | TE Connectivity | AMP 6.3 White Cable Seal 20-18GA RoHS : Compliant |
| 112 | ||
 Win Source Electronics | LT1394IS8#TRPBF | Linear Technology | IC COMPARATOR LOW PWR 7NS 8-SOIC RoHS : Compliant |
| 5,590 | |
| LT1394IS8#PBF | Linear Technology | IC COMPARATOR LOW PWR 7NS 8-SOIC RoHS : Compliant |
| 5,588 | ||
| LT1394IS8 | Linear Technology | 7ns, Low Power, Single Supply, Ground-Sensing Comparator RoHS : Not Compliant |
| 4,227 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼ 
English
Chinese
German
Japanese
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand