110-680-R Price, дистрибьютор, Stock

Key Specifications, Termination Type: RF Load, Connector Series: 2.4mm, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 50 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.2:1, Maximum Power: 1 Watt. 1 Watt RF Load Up to 50 GHz with 2.4mm Male. PE6TR1103 1 Watts RF load (also known as termination or dummy load) has a 2.4mm connector that is male. This Pasternack 1 watt 2.4mm male load / termination is rated for a maximum frequency of 50 GHz. Our 2.4mm male termination load is a rf load termination with a 50 Ohm impedance. This 2.4mm load / coax terminator is manufactured with no chain and passivated stainless steel body. Pasternack 50 Ohm 2.4mm coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.2:1. PE6TR1103 1 watt 2.4mm male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our 2.4mm male 1 watt termination load will ship worldwide the same day as purchased.

1 : $685.0
10 : $657.6
25 : $630.2
100 : $602.8

PEWCP1100S-50

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-90, Flange Size: None Flange, Flange Type : UG Cover Flange, Flange Group : Standard, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.35:1, Maximum Insertion Loss: 0.2 dB, Coupling: 50 dB. WR-90 Waveguide 50 dB Loop Coupler, UG Cover Flange, SMA Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. Pasternack’s PEWCP1100S-50 is a WR-90 directional loop coupler. This directional waveguide coupler has SMA connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 8.2 GHz and 12.5 GHz. The PEWCP1100S-50 WR-90 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 50 dB. This 50 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-90 directional waveguide coupler is rated for a maximum input power (CW) of 1,000 Watts. This 12.5 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-90 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 100,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1100S-50 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 1,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG cover flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a UG cover flange has a minimum coupler directivity of 15 dB. This WR-90 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement.

1 : $1,710.0
5 : $1,675.8
10 : $1,641.6
25 : $1,607.4

PE3C1101-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. SMA Male to N Female Bulkhead Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to N female bulkhead low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N female bulkhead low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type bulkhead cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C1101-100CM can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C1101-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1101-100CM can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead low loss cable 100 cm length using LMR-100 coax.

1 : $76.99
25 : $73.14
50 : $69.29
100 : $66.21

PE331-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to N Female Low Loss Test Cable 100 CM Length Using PE-P300LL Coax, RoHS., Radio frequency assembly N male to N female low loss test cable 100 cm length using PE-P300LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female low loss test cable 100 cm length using PE-P300LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss test type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE331-100CM, can also be known as a low loss test N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE331-100CM is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE331-100CM can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Low loss test type N plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female low loss test cable 100 cm length using PE-P300LL coax, RoHS.

1 : $437.99
25 : $416.09
50 : $394.19

PE34110

Pasternack Enterprises

PE3C1101/HS-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. N Female Bulkhead to SMA Male Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Pasternack’s PE3C1101/HS-100CM low loss type N female bulkhead to SMA male RF cable assembly using LMR-100A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and an SMA cable connection on the other. Our type N to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1101/HS-100CM can also be known as a low loss type N jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1101/HS-100CM RF cable has a pvc jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead type N female to SMA male cable has a maximum VSWR of 1.4:1. This PE3C1101/HS-100CM type N jack to SMA plug cable assembly is built with LMR-100A, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C1101/HS-100CM can also be used in the other direction and will be an SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

1 : $96.44
25 : $91.62
50 : $86.8
100 : $82.94

PE3C11029

Pasternack Enterprises

PE3C11067/HS

Pasternack Enterprises

PE3C1107

Pasternack Enterprises

PE3C11074

Pasternack Enterprises

PE3C8571-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. White FAKRA Plug to FAKRA Jack Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly white FAKRA plug to FAKRA jack low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The White FAKRA plug to FAKRA jack low loss cable 100 cm length using LMR-100 coax, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. PE3C8571-100CM can also be known as a low loss FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE3C8571-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8571-100CM can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. Low loss FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this white FAKRA plug to FAKRA jack low loss cable 100 cm length using LMR-100 coax.

1 : $40.99
25 : $38.94
50 : $36.89
100 : $35.25

PE3W03981-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Female to SMA Male Right Angle Cable 100 cm Length Using RG174 Coax., Radio frequency assembly SMA female to SMA male right angle cable 100 cm length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA male right angle cable 100 cm length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly, PE3W03981-100CM, can also be known as a SMA jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W03981-100CM is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03981-100CM can also be used in the other direction and will be right angle SMA male to SMA female cable assembly if the opposite connectivity is required. SMA jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male right angle cable 100 cm length using RG174 coax.

1 : $72.99
25 : $69.34
50 : $65.69
100 : $62.77

PE3W10110

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm.

PE3W11083

Pasternack Enterprises

Teledyne HiRel

5962-9161101MLA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, TTL-COMPATIBLE INPUTS, POSITIVE EDGE-TRIGGERED
RoHS : Not Compliant

M38510/11003BAA

Teledyne HiRel

OP AMP, QUAD
RoHS : Not Compliant

M38510/11003BCA

Teledyne HiRel

OP AMP, QUAD
RoHS : Not Compliant

M38510/11001BDA

Teledyne HiRel

OP AMP, QUAD
RoHS : Not Compliant

5962-8761101CA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

M38510/31101BFA

Teledyne HiRel

MAGNITUDE COMPARATOR, 4-BIT
RoHS : Not Compliant

5962-87611012A

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

5962-89841103A

Teledyne HiRel

CONTACT SALES
RoHS : Not Compliant

5962-8984110KA

Teledyne HiRel

CONTACT SALES
RoHS : Not Compliant

5962-9161101MKA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, TTL-COMPATIBLE INPUTS, POSITIVE EDGE-TRIGGERED
RoHS : Not Compliant

5962-8761101DA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

M38510/31101B2A

Teledyne HiRel

MAGNITUDE COMPARATOR, 4-BIT
RoHS : Not Compliant

M38510/11001BAA

Teledyne HiRel

OP AMP, QUAD
RoHS : Not Compliant

M38510/31101BEA

Teledyne HiRel

MAGNITUDE COMPARATOR, 4-BIT
RoHS : Not Compliant

M38510/11004BAA

Teledyne HiRel

OP AMP, QUAD
RoHS : Not Compliant

Waytek, Inc.

T30XL0M4 111-02903

HellermannTyton

HellermannTyton T30XL0M44 standard cable tie is a self-locking nylon tie with a 14.37" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

1,000 : $0.1684
5,000 : $0.1572

35,000

12110846-L

Aptiv PLC

Metri-Pack 280 Series Female 12110846 22-20GA TERMINAL TANGLESS LOOSE PIECE

50 : $0.1477
200 : $0.1426
500 : $0.1381
1,000 : $0.1313
5,000 : $0.1268

7,907

57120 OR 611-012

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #12 Band 1/2" 1/2" TO 1-1/4"

10 : $1.4053
50 : $1.2543
100 : $1.1381
200 : $1.1033
500 : $1.0627
1,000 : $1.0221

2,705

57200 OR 611-020

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #20 Band 1/2" 3/4" TO 1-3/4"

10 : $1.6386
50 : $1.4625
100 : $1.3271
200 : $1.2865
500 : $1.239
1,000 : $1.1916

983

114-2411-020-02

Trombetta

Bear Series 24V 4 Terminal Solenoid 225 AMP Continuous

1 : $79.24
5 : $73.95
10 : $69.48
25 : $66.23
50 : $63.38

495

1411100RD0048

ShawCor Ltd

DSG-Canusa CFW-1100 extra heavy-duty heat shrink tubing is red adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications.

1 : $26.43
10 : $22.75
50 : $20.69
100 : $18.91
500 : $17.83

473

175-S1-100-2

100A Push Trip Reset 1/4" Stud Surface S X S Circuit Breaker HI AMP SIDE BY SIDE 46985

1 : $32.03
5 : $28.59
10 : $26.79
50 : $25.15
100 : $23.95
200 : $22.9

394

31-106

Pollak

Pollak 31-106 4-position ignition switch is a keyed vehicle ignition switch for multi-position circuit control. It supports 4-position operation in a panel-mounted format, making it suitable for ignition, accessory, and start circuit switching in mobile equipment.

1 : $31.51
5 : $28.19
10 : $26.28
50 : $24.88
100 : $23.72
200 : $22.58

112

181100P-01-1

Eaton Electronics

100 AMP Auto Reset Hi Amp Panel Mount Circuit Breaker 181100P-01-1

1 : $30.83
5 : $27.53
10 : $25.67
50 : $24.23
100 : $23.09
200 : $22.08

106

174-S1-100-2

100A Manual Reset 1/4" Studs Surface S X S Circuit Breaker HI AMP SIDE X SIDE MOUNT 46925

1 : $29.46
5 : $26.29
10 : $24.64
50 : $23.26
100 : $22.16
200 : $21.06

211010-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 211010-0002 H3 100W Bulb 245,000 CANDLE 100 HRS 47858

1 : $203.67
5 : $195.36
10 : $188.08
25 : $177.69

SP41102

Eaton Electronics

Sure Power SP41102 Converter VOLT CONDITIONER 10A 12V / 14V TRAIL CHARGER

1 : $429.36
5 : $408.68
10 : $390.56

211036-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 211036-0002 LED 30 W 12V 215,000 CANDLE 50,000 HOURS

1 : $359.16
5 : $342.43
10 : $325.68

110-88004

HellermannTyton

The HellermannTyton 110-80000 EVO 9 is a heavy-duty cable tie installation tool designed for precise tensioning and flush cutting of larger nylon cable ties. Compatible with 50250 lb. ties and widths up to 13.5 mm (0.53"), it features 33 adjustable tension settings and a quick-adjust override for consistent, repeatable performance. Engineered with ergonomic Tension-Lock-Cut (TLC) technology, it minimizes kickback and operator fatigue while ensuring clean, flush cuts at the selected tension. Built with durable materials and a lightweight, glass fiberreinforced housing, it is ideal for automotive, industrial, and heavy-duty cable management applications.

1 : $572.23
10 : $536.94

211030-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 211030-0002 H3 100W Bulb 245,000 CANDLE 100 HRS 47858

1 : $203.67
5 : $195.36
10 : $188.08
25 : $177.69