поискавой системы для электроныых деталей
  Russian  ▼
ALLDATASHEETRU.COM

X  



1085D2T12-R дистрибьютор

дистрибьюторномер деталипроизводительподробное описание деталиPriceQty.
BuyNow

GLYN GmbH & Co. KG
ES51085FLW

Emerging Display Technolgies LCD 128 x 64, FSTN positive, white LED Sitronix S
17

NexGen Digital
LT1085CT-3.3

Linear Technology
RoHS : Not Compliant
15

Braemac Americas-Symmetry
WH-PS710-850

Nipron Co Peripheral cable
1 : $35.71
1
WH-PP610-850

Nipron Co
RoHS : Compliant
1 : $18.57
0
CAB.01085

Taoglas Antenna Solutions IPEX MHFI(U.FL) to 200mm 1.37mm Black SMA(F)BKST
1 : $3.34
0

Flip Electronics
NCP81085MTTXG

onsemi Stock, Ship Today
RoHS : Compliant
1 : $0.94
4,000
SI1085-A-GMR

Silicon Laboratories Inc Stock, Ship Today
1 : $3.99
1,568

Pasternack Enterprises US
PE3C10858

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Non-Magnetic Cable Using PE-SR405-NM Coax., Pasternack’s PE3C10858 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements.
50
PE3C10858-36

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMP Female Non-Magnetic Cable 36 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10858-36 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858-36 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858-36 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858-36 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements.
1 : $247.99
25 : $235.59
50 : $223.19
100 : $213.27
10
PE3C10858-18

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMP Female Non-Magnetic Cable 18 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10858-18 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858-18 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858-18 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858-18 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements.
1 : $226.99
25 : $215.64
50 : $204.29
100 : $195.21
10
PE3C10850-9

Pasternack Enterprises Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female to SMP Female Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10850-9 non-magnetic SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10850-9 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10850-9 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements.
1 : $230.99
25 : $219.44
50 : $207.89
100 : $198.65
9
PE3C10859-6

Pasternack Enterprises Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female to SMP Female Non-Magnetic Cable 6 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10859-6 non-magnetic SMP female to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10859-6 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10859-6 SMP jack to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements.
1 : $197.99
25 : $188.09
50 : $178.19
100 : $170.27
5
PE3C10855-12

Pasternack Enterprises Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 12 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-12 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-12 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-12 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements.
1 : $454.99
25 : $432.24
50 : $409.49
100 : $391.29
1
PE3C10855-24

Pasternack Enterprises Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 24 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-24 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-24 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-24 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-24 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements.
1 : $466.99
25 : $443.64
50 : $420.29
100 : $401.61
1
PE3C10851-12

Pasternack Enterprises Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to SMP Female Right Angle Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10851-12 non-magnetic right angle SMP female to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10851-12 can also be known as a non-magnetic right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10851-12 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a bronze body with copper-tin-zinc alloy over silver plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements.
1 : $66.19
25 : $62.88
50 : $59.57
100 : $56.92
0
PE3W10851LF

Pasternack Enterprises Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. C Female to N Female Cable Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements.
0
PE3W10855

Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMC Jack Cable Using RG316 Coax. PE3W10855 is a BNC male to SMC jack cable using RG316 coax. This Pasternack BNC male to SMC jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. Our male BNC to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10855 BNC male to SMC jack cable assembly is constructed with RG316 coax.
0
PE3C10853-6

Pasternack Enterprises Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-6 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-6 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-6 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-6 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements.
1 : $129.99
25 : $123.49
50 : $116.99
100 : $111.79
0
PE3W21085LF/HS

Pasternack Enterprises Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to SMA Male Cable Using PE-P086HF Coax with HeatShrink, LF Solder. PE3W21085LF/HS is a SMP male bulkhead to SMA male cable using PE-P086HF coax. This Pasternack SMP male bulkhead to SMA male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. Our male SMP bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21085LF/HS SMP male bulkhead to SMA male cable assembly is constructed with PE-P086HF coax.
0
PE3C10852-18

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMP Female Right Angle Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10852-18 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852-18 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852-18 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852-18 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements.
1 : $140.99
25 : $133.94
50 : $126.89
100 : $121.25
0
PE3C1085

Pasternack Enterprises
0
PE3C10854

Pasternack Enterprises Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Non-Magnetic Cable Using PE-SR047-NM Coax., Pasternack’s PE3C10854 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements.
0

Waytek, Inc.
12110853-L

Aptiv PLC Metri-Pack 280 Tangless Female Terminal 12-10 Ga Loose Piece
100 : $0.2099
200 : $0.1871
500 : $0.1784
1,000 : $0.1651
5,543

Win Source Electronics
CLA4611-085LF

Skyworks Solutions Inc 2 X 2 QFN PIN LIMITER DIODE
RoHS : Compliant
43 : $7.0819
34 : $7.3697
27 : $7.6576
19 : $8.2334
12 : $8.5213
6 : $9.097
50,000
TPS61085PWR

Texas Instruments IC REG BOOST ADJ 2A 8TSSOP
RoHS : Compliant
590 : $0.5106
440 : $0.5695
340 : $0.5891
250 : $0.6088
160 : $0.6284
70 : $0.7659
32,215
TPS61085TPWR

Texas Instruments IC REG BOOST ADJ 2A 8TSSOP / Boost Switching Regulator IC Positive Adjustable 2.8V 1 Output 2A (Switch) 8-TSSOP (0.173", 4.40mm Width)
RoHS : Compliant
320 : $0.9424
240 : $1.0511
185 : $1.0873
135 : $1.1236
90 : $1.1598
40 : $1.4135
22,000
ADM1085AKS

Analog Devices Inc Supervisory Circuit 1-Channel SC-70
760 : $0.397
565 : $0.4428
440 : $0.4581
320 : $0.4733
205 : $0.4886
85 : $0.5955
15,000
TPS61085PW

Texas Instruments IC REG BOOST ADJ 2A 8TSSOP
RoHS : Compliant
610 : $0.4958
455 : $0.553
350 : $0.5721
255 : $0.5911
165 : $0.6102
70 : $0.7437
13,446
LM1085IT-ADJ

Texas Instruments IC REG LDO ADJ 3A TO220-3
RoHS : Not Compliant
215 : $1.3978
172 : $1.4546
133 : $1.5114
93 : $1.6251
60 : $1.6819
28 : $1.7955
10,800
LM1085ISX-3.3

Texas Instruments IC REG LDO 3.3V 3A DDPAK
RoHS : Not Compliant
200 : $1.5023
160 : $1.5634
124 : $1.6245
86 : $1.7466
56 : $1.8077
26 : $1.9298
9,000
LM1085IS-3.3/NOPB

Texas Instruments IC REG LDO 3.3V 3A DDPAK
RoHS : Compliant
161 : $1.8637
129 : $1.9394
100 : $2.0152
70 : $2.1667
45 : $2.2425
21 : $2.394
8,590
LM1085ISX-3.3/NOPB

Texas Instruments LDO Regulator Pos 3.3V 3A 4-Pin(3+Tab) DDPAK T/R / IC REG LDO 3.3V 3A DDPAK
RoHS : Compliant
200 : $1.5023
160 : $1.5634
124 : $1.6245
86 : $1.7466
56 : $1.8077
26 : $1.9298
8,230
LM1085IT-ADJ/NOPB

Texas Instruments LM1085 3A Low Dropout Positive Regulators
RoHS : Compliant
215 : $1.3978
172 : $1.4546
133 : $1.5114
93 : $1.6251
60 : $1.6819
28 : $1.7955
5,740
LT1085CM-3.3

Linear Technology 3A, 5A, 7.5A Low Dropout Positive Fixed Regulators
RoHS : Not Compliant
19 : $16.4416
14 : $18.3387
11 : $18.971
8 : $19.6034
5 : $20.2358
3 : $24.6623
1,250
LM1085IS-12/NOPB

Texas Instruments LM1085 3A Low Dropout Positive Regulators
RoHS : Compliant
180 : $1.6674
135 : $1.8598
104 : $1.9239
76 : $1.9881
49 : $2.0522
20 : $2.5011
1,230
LT1085CM-3.3#TRPBF

Linear Technology IC REG LDO 3.3V 3A D2PAK
RoHS : Compliant
12 : $25.7702
9 : $28.7436
7 : $29.7348
5 : $30.7259
4 : $31.7171
2 : $38.6552
1,027
LT1085CM-3.3#PBF

Linear Technology IC REG LDO 3.3V 3A D2PAK
RoHS : Compliant
20 : $15.5213
15 : $17.3122
12 : $17.9091
9 : $18.5061
6 : $19.1031
3 : $23.2819
530
LT1085CT#PBF

Linear Technology IC REG LDO ADJ 3A TO220-3
RoHS : Compliant
11 : $29.771
8 : $33.2062
6 : $34.3512
5 : $35.4962
3 : $36.6413
2 : $44.6565
180

ссылки URL



Вашему бизинису помогли Аллдатащит?  [ DONATE ]  

Что такое Аллдатащит   |   реклама   |   контакт   |   Конфиденциальность   |   Ссылка на техническое описание    |   обмен ссыками   |   поиск по производителю
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com