| поискавой системы для электроныых деталей |
|
1085D2M90-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() Avnet Americas | LD1085D2M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator, 6.3V to 30V, 1.3V drop, 3.3V/3A out, TO-263AA-3 - Tape and Reel (Alt: LD1085D2M33R) RoHS : Compliant |
| 11,000 | |
| 26-48-1085 | Molex | Pin Header, 8 Contacts, 1 Row, 3.96mm, Matte Tin, 5A, Straight, Partially Shrouded, Brass, THT, PET - Bulk (Alt: 0026481085) RoHS : Compliant |
| 10,800 | ||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator, 3V to 30V, 1.3V drop, 1.8V to 28V/3A out, TO-263-3 - Tape and Reel (Alt: LD1085D2T-R) RoHS : Compliant | 2,000 | |||
| 52207-1085 | Molex | FFC / FPC Board Connector, 10 Contacts, 1 Row, 1mm, Top, Tin-Bismuth Plated, SMT, Right Angle, 0.3mm - Tape and Reel (Alt: 0522071085) RoHS : Compliant |
| 1,000 | ||
ATS-PCBT1085![]() | Advanced Thermal Solutions Inc | BOARD LEVEL HEAT SINK - Bulk (Alt: ATS-PCBT1085) RoHS : Compliant |
| 1,000 | ||
| MTMS-108-52-L-D-196 | Samtec Inc | .050" x .100" Variable Post Height Micro Term - Rail/Tube (Alt: MTMS-108-52-L-D-196) RoHS : Compliant |
| 0 | ||
| 11108523-00 | TE Connectivity | - Bag (Alt: 11108523-00) RoHS : Not Compliant |
| 0 | ||
| 1010850177 | Weidmüller Interface GmbH & Co. KG | IE-C5DB4RE0177MCSMCS-E - Bulk (Alt: 1010850177) RoHS : Not Compliant |
| 0 | ||
| ZML-108-54-G-D-670-SM | Samtec Inc | - Rail/Tube (Alt: ZML-108-54-G-D-670-SM) RoHS : Compliant |
| 0 | ||
| HC1381-08-500 | Amphenol Corporation | PCB HEADER, SHROUDED, HORIZONTAL, PITCH: 3.81MM, 10A, 300V, 8-POS - Bulk (Alt: HC1381-08-500) RoHS : Compliant |
| 0 | ||
| 1010850160 | Weidmüller Interface GmbH & Co. KG | IE-C5DB4RE0160MCSMCS-E - Bulk (Alt: 1010850160) RoHS : Not Compliant |
| 0 | ||
| 11108508-00 | TE Connectivity | AST4520Y00015P4X1355:CTO-13000000-03 - Bag (Alt: 11108508-00) RoHS : Not Compliant |
| 0 | ||
| 11108553-00 | TE Connectivity | AST4530I00208H4X9355:CTO-13000000-02 - Bag (Alt: 11108553-00) RoHS : Not Compliant |
| 0 | ||
| 1010850080 | Weidmüller Interface GmbH & Co. KG | IE-C5DB4RE0080MCSMCS-E - Bulk (Alt: 1010850080) RoHS : Not Compliant |
| 0 | ||
| 1085221-1 | TE Connectivity | - Bag (Alt: 1085221-1) RoHS : Compliant |
| 0 | ||
![]() Newark | HTMS-108-54-G-S | Samtec Inc | Pin Header, Htms-108-54-G-S; |Samtec, Inc. HTMS-108-54-G-S RoHS : Compliant |
| 187 | |
| MTMS-108-51-S-S-140 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 8Pos; |Samtec, Inc. MTMS-108-51-S-S-140 RoHS : Compliant |
| 175 | ||
| MTMS-108-52-G-D-100 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 16Pos; |Samtec, Inc. MTMS-108-52-G-D-100 RoHS : Compliant |
| 173 | ||
| ZW-12-14-G-S-1085-108 | Samtec Inc | Conn Stack Brd, 2.54Mm, 12Pos, Hdr; |Samtec, Inc. ZW-12-14-G-S-1085-108 RoHS : Compliant |
| 173 | ||
| TMS-108-58-S-S | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 8Pos; |Samtec, Inc. TMS-108-58-S-S RoHS : Compliant |
| 170 | ||
| DW-09-14-T-T-1085 | Samtec Inc | Conn Stack Brd, 2.54Mm, 27Pos, Hdr; |Samtec, Inc. DW-09-14-T-T-1085 RoHS : Compliant |
| 148 | ||
| 1085 | Weller Hand Tools GmbH | Baffle Kit; |Weller (Apex Tool Group) 1085 RoHS : Not Compliant |
| 144 | ||
| HTMS-108-55-S-D-SM | Samtec Inc | Pin Header, Htms-108-55-S-D-Sm; |Samtec, Inc. HTMS-108-55-S-D-SM RoHS : Compliant |
| 139 | ||
| FMC0421085/SP1-48 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 4 Ft, 1.21M; |Fairview Microwave FMC0421085/SP1-48 RoHS : Not Compliant |
| 131 | ||
| PTT-11085-C | BUD Industries Inc | Plastic Enclosure, Junction Box, Abs; |Bud Industries PTT-11085-C RoHS : Compliant |
| 42 | ||
| 241085 | Vermason | Rigid Conductive, Box, 230 X 128 X 30Mm; |Desco Europe/vermason 241085 RoHS : Not Compliant |
| 10 | ||
| ARK1085CHFSSLF | FIBOX | Enclosure Plast, Small, Polycarbonate; |Fibox ARK1085CHFSSLF RoHS : Compliant |
| 5 | ||
| MB 10859 II | FIBOX | Enclosure Accessory, Fanholder; |Fibox MB 10859 II RoHS : Compliant |
| 4 | ||
| 1085 | Pelican Products Inc | 1085 Hardback Case; |Pelican Products 1085 RoHS : Not Compliant |
| 0 | ||
| 1085 | Adafruit Industries | Ads1115 16-Bit Adc - 4 Channel With Programmable Gain Amplifier - Stemma Qt/Qwiic Rohs Compliant: Yes |Adafruit 1085 RoHS : Compliant |
| 0 | ||
![]() RS | 1710853 | RS Pro | ELECTROMECHANICAL BUZZER INTERNAL DRIVE 75DB 30MA 3V 3KHZ 9.6MM X 5MM |
| 150 | |
| 97-3101A-28(621)(0850) | Amphenol Industrial Operations | CABLE RECEPTACLE SHELL, METAL SZ 28, BLACK, MIL-5015 TYPE 97 SERIES |
| 88 | ||
| 1085162 (FL SWITCH 1108NT) | Phoenix Contact | UNMANAGED SWITCH 8 X RJ45 PORTS, 10/100/1000 MBPS |
| 26 | ||
| 26-48-1085 (A-41671-C08A197) | Molex | HEADERS VERT B/A HDR 8P TIN FRICTION LOCK |
| 24 | ||
| 1671085 (SAC-3P- 5 0-PUR/M 8FR-2L) | Phoenix Contact | CABLE ASSEMBLY WITH A 3 POLE RIGHT ANGLE M8 SOCKET AND AN UNTERMINATED END |
| 10 | ||
| 2451907 (25531085) (MPRI0-400870-100RS) | RS Pro | SCREW, #4-40 X 7/8 PHILLIPS ROUND MACHINE, ZINC PLATED |
| 5 | ||
| 56108 (56108-5) | Klein Tools Inc | POLY PULL LINE WITH ORANGE TRACER 500-FEET |
| 3 | ||
| ICN1P32N35I (913710852301) | Advance by Signify | ELECTRONIC BALLAST, ICN1P32N35I, T8 1 LAMP INSTANT START 120-277 VOLT |
| 2 | ||
| 1085TW-N | Edwards Signaling | SURFACE TERMINAL/CLOSED LOOP/W |
| 1 | ||
| PTT-11085-C | BUD Industries Inc | TERMINAL BLOCK BOX, ABS, 10 SIDE, CLEAR, 75 X 125 X 43MM, PTT SERIES |
| 1 | ||
| LMF04 (10853) | Banner Engineering Corp | IVU MICROVIDEO 4.3 MM LENS, IMAGER SIZE: 1/3 IN, METAL HOUSING |
| 1 | ||
| AR1085CHFSC (8561659) | FIBOX | PC ENCLOSURE, 8" WIDE X 5" DEEP X 10" HIGH, HINGED OPAQUE FLAT SCREW COVER |
| 1 | ||
| 1085163 (FL SWITCH 1105NT) | Phoenix Contact | UNMANAGED SWITCH 5 X RJ45 PORTS, 10/100/1000 MBPS |
| 1 | ||
| 1085 | Adafruit Industries | ADS1115 16-BIT ADC - 4 CHANNEL WITH PROGRAMMABLE GAIN AMPLIFIER |
| 0 | ||
| 1085 | Apex Tool Group LLC | WELLER, 3-PIECE BAFFLE KIT FOR THE 6970, 1095 HEAT GUNS |
| 0 | ||
![]() Microchip Technology Inc | GC1610-85 | Microchip Technology Inc | Si TVAR Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | ||
TC1108-5.0VDBTR![]() | Microchip Technology Inc | 300mA LDO, SOT-223, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070 | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070T | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| OX-1740-BEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-BEE-1085-10M0000000, Projected EOL: 2051-03-16 - Contact for Pricing RoHS : Unknown | 0 | |||
| OH-1730-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1730-DAX-1085-10M0000000, Projected EOL: 2051-05-12 - Contact for Pricing | 0 | |||
| OX-1740-DEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-DEE-1085-10M0000000, Projected EOL: 2051-08-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| OH-1710-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
| OH-2010-DEX-1085-10M0000000 | Microchip Technology Inc | OH-2010-DEX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
| OH-1710-DAE-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAE-1085-10M0000000, Projected EOL: 2051-08-02 - Contact for Pricing | 0 | |||
![]() Rochester Electronics | LT1085CT-5#PBF | Analog Devices Inc | IC VOLT REG Fixed 1 REG 5V 3A TO-220-3 Tube RoHS : Compliant |
| 229 | |
TPS61085PW![]() | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 2.8V - 18.5V 2A (Switch) 8-SOP Tube RoHS : Compliant |
| 43 | ||
TPS61085DGKT![]() | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 2.8V - 18.5V 2A (Switch) 8-SOP T/R RoHS : Compliant |
| 25 | ||
TPS61085TPWR![]() | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 2.8V - 18.5V 2A (Switch) 8-SOP T/R RoHS : Compliant |
| 12,984 | ||
LT1085CT![]() | Linear Technology | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant |
| 6 | ||
LT1085CT-5#PBF![]() | Linear Technology | IC VOLT REG Fixed 1 REG 5V 3A TO-220-3 Tube RoHS : Compliant |
| 43 | ||
DS1085LZ-25+![]() | Maxim Integrated Products | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant |
| 5,067 | ||
DS1085LZ-25B2+![]() | Maxim Integrated Products | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant |
| 3,900 | ||
DS1085Z-50![]() | Maxim Integrated Products | 3.3V EconOscillator Frequency Synthesizer RoHS : Not Compliant |
| 63 | ||
DS1085Z-50+![]() | Maxim Integrated Products | Clock Generator, 133MHz, CMOS, PDSO8 RoHS : Compliant |
| 5,520 | ||
| LM1085IS-12 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant |
| 1,670 | ||
| LM1085IT-12/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 12V 3A TO-220-3 Tube RoHS : Compliant |
| 118 | ||
LD1085D2T33R![]() | STMicroelectronics | IC VOLT REG Fixed 1 REG 3.3V 3A TO-263-3 T/R RoHS : Compliant |
| 3,000 | ||
| SIT8008BC-12-33E-10.850316D | SiTime Corporation | SiT8008B - 1 to 110 MHz, Low Power Oscillator RoHS : Compliant |
| 3,000 | ||
| SP1085V1-L/TR | Sipex Corporation | Adjustable Positive LDO Regulator, 1.5V Dropout RoHS : Compliant |
| 101,750 | ||
![]() Sager | 1085255 | Phoenix Contact | Unmanaged Ethernet Switches FL SWITCH 1016N RoHS : Compliant |
| 405 | |
| 1085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 1633108-5 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMBINATION | 0 | |||
| 1108529-1 | TE Connectivity | Heavy Duty Power Connectors HE.24.STI.C/SB+2EB RoHS : Compliant | 0 | |||
| 1108574-1 | TE Connectivity | Heavy Duty Power Connectors Size 3 Hood PG13 Side Clip Side Entry RoHS : Compliant | 0 | |||
| 11108523-00 | TE Connectivity | AST4520Y00208H4X1353:CTO-13000000-03 |
| 0 | ||
| 1085174 | Phoenix Contact | UM-PRO 122 PROFIL L220 KMGY |
| 0 | ||
| 340108501B | C&K Switches | D-Sub Standard Connectors | 0 | |||
| 510-91-085-13-042001 | Mill-Max Mfg Corp | IC & Component Sockets STANDRD SOLDER TAIL PGA SOCKET RoHS : Not Compliant | 0 | |||
| 464-11061-085 | Carling Technologies | Rocker Switches ROCKER VV-A OR B9H00 | 0 | |||
| 0417910855 | Molex | Headers & Wire Housings KK 156 Hdr Assy FrLk 08 Ckt 30 SGold RoHS : Compliant |
| 0 | ||
| ZML-108-54-G-D-670-SM | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Micro Shrouded Terminal Strip RoHS : Compliant |
| 0 | ||
| 0026481085 | Molex | Headers & Wire Housings HDR VT 1X08P .156 450/172 SN RoHS : Compliant |
| 0 | ||
| HMTMS-108-53-S-D-230 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HMTMS-108-59-S-D-535 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() TME | 3-1419108-5 | TE Connectivity | Relay: electromagnetic; Ucoil: 12VDC; SPST-NO; Icontacts max: 16A RoHS : Compliant |
| 4,353 | |
| 97-3102A-16S(621)(0850) | Amphenol Corporation | 97-3102A-16S(621)(0850) |
| 27 | ||
| 11108524-00 | TE Connectivity | 11108524-00 RoHS : Not Compliant |
| 6 | ||
| 108 525 E | RUKO GmbH | Drill bit; core; Ø: 25mm; L: 88mm; high speed steel cobalt HSS-E |
| 0 | ||
| 108 538 F | RUKO GmbH | Drill bit; core; Ø: 38mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
| 108 542 F | RUKO GmbH | Drill bit; core; Ø: 42mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
| 108 545 | RUKO GmbH | Drill bit; core; Ø: 45mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
| 10850 | ProLinear/PONTECH Inc | Screwdriver bit: Torx®; TX30; 3/8"; Overall len: 30mm; 2pcs. |
| 0 | ||
| 1108550000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; SL; 17A; 320V RoHS : Compliant |
| 0 | ||
| 208310 85 000 100 | RECA | Screw; M10; M10x85; Head: cheese head; hex key; HEX 8mm; steel; none |
| 0 | ||
| 281 085 EF | RUKO GmbH | Drill bit; for metal; Ø: 8.5mm; L: 117mm; Working part len: 75mm |
| 0 | ||
| 008001085 000 100 | RECA | Screw; M10; M10x85; Head: cheese head; hex key; HEX 8mm; steel |
| 0 | ||
| 1010850250 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M12; PIN: 4; male; shielded,straight; IE; IP67 RoHS : Compliant |
| 0 | ||
| 108 512 E | RUKO GmbH | Drill bit; core; Ø: 12mm; L: 88mm; high speed steel cobalt HSS-E |
| 0 | ||
| 108 525 F | RUKO GmbH | Drill bit; core; Ø: 25mm; L: 88mm; high speed steel; weldon; 3/4" |
| 0 | ||
![]() Ameya Holding Limited | LM1085IT-5.0/NOPB![]() | Texas Instruments | IC: voltage regulator; LDO,fixed; 5V; 3A; TO220-3; THT; tube; ±4% RoHS : Compliant | 65,656 | ||
LM1085ISX-ADJ/NOPB![]() | Texas Instruments | IC REG LDO ADJ 3A DDPAK RoHS : Compliant | 45,692 | |||
LD1085D2M33R![]() | STMicroelectronics | LD1085 Series 3.3 V 3 A Adjustable & Fixed Positive Voltage Regulator - D2PAK RoHS : Compliant | 32,540 | |||
LM1085IS-12/NOPB![]() | Texas Instruments | Hong Kong RoHS : Compliant | 30,482 | |||
LD1085D2T33R![]() | STMicroelectronics | LD1085 Series 3 A 3.3 V Fixed Output Positive Voltage LDO Regulator - D2PAK RoHS : Compliant | 25,543 | |||
LD1085D2T-R![]() | STMicroelectronics | LD1085 Series 3 A Adjustable Output Positive Voltage LDO Regulator - D2PAK RoHS : Compliant | 23,456 | |||
LD1085V![]() | STMicroelectronics | LD1085 Series 3 A Adjustable Output Positive Voltage LDO Regulator - TO-220 RoHS : Compliant | 11,735 | |||
LD1085D2M18R![]() | STMicroelectronics | LD1085 Series 1.8 V 3 A Low Drop Positive Voltage Regulator - D2PAK-3 RoHS : Compliant | 9,084 | |||
LD1085D2M25R![]() | STMicroelectronics | LD1085 Series 3 A 2.5 V Fixed Output Positive Voltage LDO Regulator - D2PAK RoHS : Compliant | 7,477 | |||
LD1085P![]() | STMicroelectronics | LDO VREG ADJ 3A 2% TO220FP RoHSconf RoHS : Compliant | 4,707 | |||
TPS61085ATDGKRQ1![]() | Texas Instruments | RoHS : Compliant | 3,578 | |||
TPS61085DGKT![]() | Texas Instruments | MSOP 8/I°/18.5V, 2A, 650KHZ, 1.2MHZ STEP-UP DC-DC CONVERTER RoHS : Compliant | 1,645 | |||
TPS61085ATDGKTQ1![]() | Texas Instruments | RoHS : Compliant | 1,420 | |||
LM1085ISX-5.0/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,000 | |||
TPS61085PW![]() | Texas Instruments | IC: PMIC; DC/DC converter; Uin: 2.3÷6V; Uout: 18.5V; TSSOP8; boost RoHS : Compliant | 282 | |||
![]() ComSIT USA | BI30001085 | AVED ELECTRONICS | AVAILABLE EU | 26 | ||
| 1085880000 | Weidmüller Interface GmbH & Co. KG | AVAILABLE EU RoHS : Compliant | 1,897 | |||
| BI20001085 | IMESA | AVAILABLE EU | 23 | |||
![]() ComSIT USA | BUK10850DL | NXP Semiconductors | POWERMOS TRANSISTOR LOGIC LEVEL TOPFET Buffer/Inverter Based Peripheral Driver, PSSO2 RoHS : Compliant | 52,295 | ||
LD1085D2M18R![]() | STMicroelectronics | 3 AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 3,000 | |||
| LT1085IM36TR | Linear Technology | 3A LOW DROPOUT POSITIVE FIXED REGULATOR Fixed Positive LDO Regulator, 3.6V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 1,118 | |||
LT1085CT![]() | Linear Technology | 3 AMPERE LOW DROPOUT POSITIVE ADJUSTABLE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 1,019 | |||
| LM1085ISX33NOPB | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 745 | |||
EZ1085CMTR![]() | Semtech Corporation | 3 AMP POSITIVE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.3V Min, 5.7V Max, 1.35V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 505 | |||
| LM1085ISADJ | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 472 | |||
| LD1085V | SGS Semiconductor Ltd | 3 AMP LOW DROP POSITIVE ADJUSTABLE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar RoHS : Compliant | 350 | |||
| LM1085IT33 | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 209 | |||
| LH1085 | Siemens | Electronic Component RoHS : Not Compliant | 200 | |||
| LM1085ISADJNOPB | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 154 | |||
| 2510108530 | Wieland Electric GmbH | Electronic Component RoHS : Not Compliant | 143 | |||
| LD1085D2T25 | SGS Semiconductor Ltd | 3A LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 2.5V, 1.5V Dropout, BIPolar, PSSO2 RoHS : Not Compliant | 125 | |||
| LM1085IT12 | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 109 | |||
| MRF21085 | Freescale Semiconductor | THE RF MOSFET LINE N-CHANNEL ENHANCEMENT-MODE LATERAL RF POWER MOSFET RF Power Field-Effect Transistor, 1-Element, S Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 12 | |||
![]() GLYN GmbH & Co. KG | ES51085FLW | Emerging Display Technolgies | LCD 128 x 64, FSTN positive, white LED Sitronix S | 17 | ||
![]() PEI Genesis | 031-0859-001 | ITT Interconnect Solutions |
| 0 | ||
| J1085D-12T-12N | SOURIAU-SUNBANK |
| 0 | |||
| D110853-1 | ITT Interconnect Solutions |
| 0 | |||
| C146-10R010-852-8 | Amphenol Tuchel |
| 0 | |||
| J1085B-12S-1RN | SOURIAU-SUNBANK |
| 0 | |||
| C146-10R010-852-1 | Amphenol Tuchel |
| 0 | |||
| D110853 | ITT Interconnect Solutions |
| 0 | |||
| J94-28108-5 | SOURIAU-SUNBANK |
| 0 | |||
| 217-1085-001 | ITT Interconnect Solutions |
| 0 | |||
| 4214108-57 | SOURIAU-SUNBANK |
| 0 | |||
| C146-21R010-852-1 | Amphenol Tuchel |
| 0 | |||
| TP1085-3 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TP1085-4 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| M85049/10-85Z | Amphenol PCD |
| 0 | |||
| J1085A-12S-1RN | SOURIAU-SUNBANK |
| 0 | |||
![]() Chip 1 Exchange | 12110853 | INSTOCK | 14,000 | |||
| 272217108576 | TDK Corporation | INSTOCK | 2,286 | |||
| LT1085CT | INSTOCK | 2,032 | ||||
| 1211085 | INSTOCK | 2,000 | ||||
| LD1085V36 | INSTOCK | 1,200 | ||||
| L6410854 | LSI Corporation | INSTOCK | 1,056 | |||
| ACS108-55N | INSTOCK | 880 | ||||
| 1928301085 | Bosch Sensortec | INSTOCK | 785 | |||
| 0026481085 | INSTOCK | 547 | ||||
TJA1085HN,118![]() | NXP Semiconductors | INSTOCK RoHS : Compliant | 365 | |||
| LT1085CT#PBF | INSTOCK | 300 | ||||
| LH701085 | Sharp Microelectronics of the Americas | INSTOCK | 200 | |||
| SR130/1085A | Advanced-Connectek Inc | INSTOCK | 146 | |||
| LM1085ITADJ | INSTOCK | 105 | ||||
| 33108561 | INSTOCK | 28 | ||||
![]() Avnet Abacus | 522071085 | Molex | FFC FPC Board Connector Right Angle 1 mm 10 Contacts Receptacle EasyOn 52207 Surface Mount - Tape and Reel (Alt: 522071085) RoHS : Compliant | 4,000 | ||
| VC121085S151DP | Kyocera AVX Components | TVS Varistor 60 V 85 V 150 V 1210 3225 Metric Multilayer Varistor MLV (Alt: VC121085S151DP) RoHS : Compliant | 4,000 | |||
| 3KYY1108-554 | Grayhill Inc | CAN Keypad custom (Alt: 3KYY1108-554) RoHS : Compliant | 103 | |||
| 1085255 | Phoenix Contact | FL SWITCH 1016N FLSWITCH1016N (Alt: 1085255) RoHS : Compliant | 0 | |||
| 26481085 | Molex | (Alt: 26481085) RoHS : Compliant | 0 | |||
| 26481085 | Molex | (Alt: 26481085) RoHS : Compliant | 0 | |||
| 1108529-1 | TE Connectivity | (Alt: 1108529-1) RoHS : Compliant | 0 | |||
| 1108574-1 | TE Connectivity | (Alt: 1108574-1) RoHS : Compliant | 0 | |||
| 417910851 | Molex | (Alt: 417910851) RoHS : Compliant | 0 | |||
| 1051085-1 | TE Connectivity | Conn SMA RCP 0Hz to 18GHz 50Ohm Solder ST Flange Mount Gold (Alt: 1051085-1) RoHS : Compliant | 0 | |||
| 1085221-1 | TE Connectivity | (Alt: 1085221-1) RoHS : Compliant | 0 | |||
| 1085221-1 | TE Connectivity | (Alt: 1085221-1) RoHS : Compliant | 0 | |||
| 1-66108-5 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip (Alt: 1-66108-5) RoHS : Compliant | 0 | |||
| XXX09571085 | Molex | Conn Unshrouded Header HDR 8 POS 396mm Solder ST ThruHole (Alt: XXX9571085) RoHS : Compliant | 0 | |||
| TMS-108-58-S-S | Samtec Inc | Pin Header BoardtoBoard 127 mm 1 Rows 8 Contacts Through Hole TMS Series (Alt: TMS-108-58-S-S) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BPMI0011085075NK0E | Pulse Electronics Corporation | (Alt: BPMI0011085075NK0E) RoHS : Compliant |
| 1,000 | |
| 10127721-085GRLF | Amphenol Corporation | (Alt: 10127721-085GRLF) RoHS : Compliant | 0 | |||
| 301085589 | Qnity Laird | MEC FOAM LOSSY 9X6X3.17MM (Alt: 301085589) RoHS : Compliant | 0 | |||
| VSMA1085250 | Vishay Intertechnologies | HiPow IR Emitting Diode 850nm -e3 (Alt: VSMA1085250) RoHS : Compliant | 0 | |||
| 2410850-2 | TE Connectivity | RCPT CONN QSFP 112 STACKED, W/STOPPER (Alt: 2410850-2) RoHS : Compliant | 0 | |||
| X1E000021085300 | Epson Electronics America Inc | (Alt: X1E000021085300) RoHS : Compliant | 0 | |||
| 10127721-085SLF | Amphenol Corporation | (Alt: 10127721-085SLF) RoHS : Compliant | 0 | |||
| 1-2410850-1 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-1) RoHS : Compliant | 0 | |||
| 1-2410850-2 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-2) RoHS : Compliant | 0 | |||
| 095-900-10852-1 | Amphenol Corporation | (Alt: 095-900-10852-1) RoHS : Compliant |
| 0 | ||
| 0522071085 | Molex | FFC / FPC Board Connector, 10 Contacts, 1 Row, 1mm, Top, Tin-Bismuth Plated, SMT, Right Angle, 0.3mm (Alt: 0522071085) RoHS : Compliant | 0 | |||
| 2108517-2 | TE Connectivity | Stamped Antenna, Dual Band, 2.4 GHz to 2.5 GHz, 5.15 GHz to 5.875 GHz, Surface Mount (Alt: 2108517-2) RoHS : Compliant | 0 | |||
| 811085-000 | TE Connectivity | (Alt: 811085-000) RoHS : Compliant | 0 | |||
| 0417910852 | Molex | Pin Header, 5 Contacts, 1 Row, 3.96mm, Gold, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board (Alt: 0417910852) RoHS : Compliant | 0 | |||
| 2-1419108-5 | TE Connectivity | (Alt: 2-1419108-5) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LD1085D2M25R![]() | STMicroelectronics | LDO Regulator Pos 25V 3A 4Pin3Tab D2PAKA TR (Alt: LD1085D2M25R) RoHS : Compliant | 274,000 | ||
LD1085D2M18R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 425V to 30V 13V drop 18V3A out TO263AA3 (Alt: LD1085D2M18R) RoHS : Compliant | 105,000 | |||
LD1085D2M-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 76,000 | |||
LD1085D2M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 63V to 30V 13V drop 33V3A out TO263AA3 (Alt: LD1085D2M33R) RoHS : Compliant | 76,000 | |||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2T-R) RoHS : Compliant | 58,000 | |||
LD1085D2T33R![]() | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| STA1085POA | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 600MHz 33V 361Pin LFBGA Tray (Alt: STA1085POA) RoHS : Compliant | 0 | |||
| STA1085ELA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3) RoHS : Compliant | 0 | |||
| STA1085EUA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085EUA3) RoHS : Compliant | 0 | |||
| P3T1085UKAZ | NXP Semiconductors | (Alt: P3T1085UKAZ) RoHS : Compliant | 0 | |||
| STA1085EOA3TR | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA TR (Alt: STA1085EOA3TR) RoHS : Compliant | 0 | |||
TJA1085HN,118![]() | NXP Semiconductors | FlexRay Transceiver 4TX 4RX 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085HN,118) RoHS : Compliant | 0 | |||
| STA1085POA3TR | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 600MHz 33V 361Pin LFBGA TR (Alt: STA1085POA3TR) RoHS : Compliant | 0 | |||
| TJA1085GHN/0Z | NXP Semiconductors | FlexRay Transceiver 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085GHN/0Z) RoHS : Compliant | 0 | |||
TC1108-5.0VDBTR![]() | Microchip Technology Inc | LDO Regulator Pos 5V 03A 4Pin3Tab SOT223 TR (Alt: TC1108-5.0VDBTR) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | WH-PS710-850 | Nipron Co | Peripheral cable |
| 1 | |
| WH-PP610-850 | Nipron Co | RoHS : Compliant |
| 0 | ||
| CAB.01085 | Taoglas Antenna Solutions | IPEX MHFI(U.FL) to 200mm 1.37mm Black SMA(F)BKST |
| 0 | ||
![]() Component Electronics, Inc | TMS-108-52-T-S | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | |
| AME1085ACDT-3 | AME Inc | IN STOCK SHIP TODAY | 120 | |||
| AME1085ACDT | AME Inc | IN STOCK SHIP TODAY | 100 | |||
| 97-3106B-14S621-0850 | Amphenol Corporation | IN STOCK SHIP TODAY |
| 58 | ||
LT1085CM-3.3#TRPBF![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 54 | ||
| 07.311.0853.9 | Weiland Electric GmbH | IN STOCK SHIP TODAY |
| 46 | ||
| 07.311.0853.5 | Weiland Electric GmbH | IN STOCK SHIP TODAY |
| 45 | ||
| AV108-59 | Alpha Industries | IN STOCK SHIP TODAY |
| 40 | ||
EZ1085CM![]() | Semtech Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 30 | ||
| 0522071085 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
| 52207-1085 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
| MB100H-10.855275MHZ | MMD | IN STOCK SHIP TODAY | 16 | |||
| LM1085IS-3.3 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12 | ||
| LM1085IT-ADJ/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
LT1085CT![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
![]() EBV Elektronik | LD1085V![]() | STMicroelectronics | LDO Regulator Pos 125V to 28V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V) RoHS : Compliant | 1,100 | ||
LD1085D2M-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 1,000 | |||
LD1085D2T33R![]() | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| VSMA1085600 | Vishay Intertechnologies | (Alt: VSMA1085600) RoHS : Compliant | 600 | |||
| FP11085_LISA2-RS-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11085_LISA2-RS-CLIP) RoHS : Compliant | 100 | |||
| SIM7912G-M2 S2-1085F-Z306Z | SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085F-Z306Z) RoHS : Compliant | 2 | |||
| P3T1085UKZ | NXP Semiconductors | Temperature Sensor IC Digital 05C 40 C 125 C WLCSP 6 Pins (Alt: P3T1085UKZ) RoHS : Compliant | 0 | |||
| STA1085EOA | STMicroelectronics | MID INFOTAINMENT (Alt: STA1085EOA) RoHS : Compliant | 0 | |||
| STA1085ELA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3) RoHS : Compliant | 0 | |||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2T-R) RoHS : Compliant | 0 | |||
TJA1085HN,118![]() | NXP Semiconductors | FlexRay Transceiver 4TX 4RX 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085HN,118) RoHS : Compliant | 0 | |||
| TJA1085GHN/0Z | NXP Semiconductors | FlexRay Transceiver 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085GHN/0Z) RoHS : Compliant | 0 | |||
| VSMA1085750X02 | Vishay Intertechnologies | HiPow IR Emitting Diode 850nm e3 (Alt: VSMA1085750X02) RoHS : Compliant | 0 | |||
| SIM7912G-M2 S2-1085D | SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085D) RoHS : Compliant | 0 | |||
| SIM7906E-M2 S2-1085A-Z30KQ | SIMCom | Cellular Module DL CA LTEFDD LTETDD WCDMA 3135V to 44V 42mm x 30mm x 23mm (Alt: SIM7906E-M2 S2-1085A-Z30KQ) RoHS : Compliant | 0 | |||
![]() ECCO | 97-3102A-18(621)(0850) | Amphenol Industrial Operations |
| 2,614 | ||
| 97-3102A-22(621)(0850) | Amphenol Industrial Operations |
| 1,685 | |||
| 97-3106A-22(621)(0850) | Amphenol Industrial Operations |
| 546 | |||
| 97-3106A-22(621)(0850) | Amphenol Industrial Operations |
| 546 | |||
| 97-3100A-14S(621)(0850) | Amphenol Industrial Operations |
| 428 | |||
| 97-3101A-14S(621)(0850) | Amphenol Industrial Operations |
| 182 | |||
| 97-3106A-20(B)(621)(0850) | Amphenol Industrial Operations |
| 128 | |||
| 97-3102A-12S(621)(0850) | Amphenol Industrial Operations |
| 100 | |||
| 97-3102A-12S(621)(0850) | Amphenol Industrial Operations |
| 100 | |||
| 97-3108B-14S(621)(0850) | Amphenol Industrial Operations |
| 72 | |||
| 97-3101A-18(621)(0850) | Amphenol Industrial Operations |
| 50 | |||
| 97-3101A-28(621)(0850) | Amphenol Industrial Operations |
| 24 | |||
| 97-3101A-28(621)(0850) | Amphenol Industrial Operations |
| 24 | |||
| 97-3108A-28(621)(0850) | Amphenol Industrial Operations | 1 | ||||
| 97-3100A-18(621)(0850) | Amphenol Industrial Operations |
| 1 | |||
![]() Flip Electronics | NCP81085MTTXG | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,000 | |
| SI1085-A-GMR | Silicon Laboratories Inc | Stock, Ship Today |
| 1,568 | ||
![]() Master Electronics | 2110855-1 | TE Connectivity | AMP MTA-100 Connector Kit: 2 3 4 6 8 and 10 Circuit Through Hole Flat Single Row Straight and Right Angle Header and 22 AWG Closed End Connector Kit RoHS : Compliant |
| 0 | |
| 1633108-5 | TE Connectivity | ANVIL COMBINATION .070 RoHS : Not Compliant |
| 0 | ||
| 132041-0859 | ITT Interconnect Solutions | Circular Plastic Push Pull Inline Receptacle Gray 7 Pin 5 A PLC Series | ITT Cannon PLC1G523H07 RoHS : Compliant |
| 0 | ||
| 1108574-1 | TE Connectivity | HB.6.STS.1.13 RoHS : Compliant |
| 0 | ||
| 11108523-00 | TE Connectivity | AST4520Y00208H4X1353:CTO-13000000-03 RoHS : Compliant |
| 0 | ||
| 121085-0000 | ITT Interconnect Solutions | Circular Connector - Box Mount - Contact Arrangement: 12S-3 - Pins - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 1085174 | Phoenix Contact | UM-PRO 122 PROFIL L220 KMGY RoHS : Compliant |
| 0 | ||
| 096511-0850 | ITT Interconnect Solutions | Connector Micro D Subminiature Receptacle 9 Position 1.27mm Solder Right Angle Through Hole RoHS : Not Compliant |
| 0 | ||
| 31-085-1 | Mode Electronics | Auto Power Plug c/w Led RoHS : Compliant |
| 0 | ||
| S1SS-05-28-GF-10.85-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZML-108-54-G-D-670-SM | Samtec Inc | Conn Elevated Shrouded Header HDR 16 POS 1.27mm Solder ST SMD Tube RoHS : Compliant |
| 0 | ||
| RCV-00108565 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| HMTMS-108-52-S-D-000 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HMTMS-108-53-S-D-230 | Samtec Inc | Conn Unshrouded Header HDR 16 POS 1.27mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| HMTMS-108-53-S-S-000 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE51085 | Pasternack Enterprises | Key Specifications, Antenna Type: Portable, Polarization: Vertical, Minimum Frequency: 3.4 GHz, Maximum Frequency: 3.8 GHz, Connector 1 Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Nominal Gain: 5 dB, Maximum Input VSWR: 2:1. 5 dBi Rubber Duck Portable Antenna 3,400-3,800 MHz Reverse Polarity SMA Male Connector. Rubber duck portable antenna PE51085 from Pasternack (also known as a rubber duck antenna) is part of our extensive in-stock omni-directional radio antenna selection. This single band rubber duck portable antenna has a frequency range of 3.4 GHz to 3.8 GHz and a 5 nominal dBi gain. Our portable rubber duck antenna uses reverse polarity SMA male connector and is rated for 0 Watts input. PE51085 rubber duck portable radio antenna is one of over 40,000 RF, microwave and millimeter wave components supplied from Pasternack. Our portable rubber duck aerial can be bought and shipped worldwide the same-day as with our other available RF parts. |
| 31 | |
| PE3C10859 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm. SMP Female to SMP Female Non-Magnetic Cable Using PE-SR405-NM Coax., Pasternack’s PE3C10859 non-magnetic SMP female to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10859 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10859 SMP jack to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. | 25 | |||
| PE3C10857-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMA Male Non-Magnetic Cable 6 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10857-6 non-magnetic SMA male to SMA male RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10857-6 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10857-6 SMA plug to SMA plug cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 11 | ||
| PEWCP1085N-40 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-75, Flange Size: None, Flange Type : UG Cover, Minimum Frequency: 9.84 GHz, Maximum Frequency: 15 GHz, Maximum VSWR: 1.25:1, Coupling: 40 dB. WR-75 Waveguide 40 dB Crossguide Coupler, UG Cover Flange, N Female Coupled Port, 9.84 GHz to 15 GHz, Brass. The PEWCP1085N-40 is a 40 dB WR-75 three port crossguide coupler with intergrated N Female connector for the coupled port. This coupler can be mounted directly into the waveguide signal path, connected via coax to allow signal sampling /monitoring. The coupler has a typical VSWR of 1.1:1 and are made of Brass with UG Cover flanges. The PEWCP1085N-40 is part of a family of cross guide couplers offered by Pasternack with coupling values ranging from 20 to 50 dB. |
| 6 | ||
| PE15A1085 | Pasternack Enterprises | Key Specifications, Gain: 50 dB, Power Output: 19 dBm P1dB, Frequency, Min: 50 MHz, Frequency, Max: 8 GHz, Noise Figure, Max: 3 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 290 mA, Connector Series: SMA. 2.0 dB NF Low Noise Amplifier, Operating from 50 MHz to 8 GHz with 50 dB Gain, 19 dBm P1dB and SMA. The PE15A1085 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This DC powered low noise amplifier has a female gender configuration for input and output ports. This SMA low noise amplifier has a minimum frequency of 50 MHz and maximum frequency of 8 GHz. The PE15A1085 low noise amplifier has 1.9:1 of typical VSWR (Voltage Standing Wave Ratio). This radio frequency amplifier has impressive typical performance that includes a very low noise figure of 2 dB, small signal gain of 50 dB, and gain flatness of 2 dB. Our 007 ADCC powered low noise amplifier is designed to operate on a 9/15 VDC voltage. The PE15A1085 007 low noise amplifier operates over the temperature range of -40 deg C and 85 deg C. This low noise amplifier has 19 dB of typical 1dB compression power and a maximum RF input power of -10 dBm. The Pasternack low noise amplifier features 240 mA typical DC current. Additional specs for this low noise amplifier can be found on its PDF specification datasheet and CAD drawings above. Our DC powered low noise radio frequency amplifier is part of over 40,000 RF, microwave, and millimeter wave components available from Pasternack. This coaxial low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 007 DC powered low noise amplifier for your requirement. |
| 1 | ||
| PE3C10851-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to SMP Female Right Angle Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10851-12 non-magnetic right angle SMP female to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10851-12 can also be known as a non-magnetic right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10851-12 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a bronze body with copper-tin-zinc alloy over silver plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10851LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. C Female to N Female Cable 36 Inch Length Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable 36 inch length using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable 36 inch length using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF-36 can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF-36 RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF-36 is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF-36 can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10855/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMC Jack Cable Using RG316 Coax with HeatShrink. PE3W10855/HS is a BNC male to SMC jack cable using RG316 coax. This Pasternack BNC male to SMC jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. Our male BNC to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10855/HS BNC male to SMC jack cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C10853-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-18 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-18 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-18 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-18 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10854-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female Right Angle to SMP Female Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10854-6 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854-6 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854-6 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854-6 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10856-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Non-Magnetic Cable 24 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-24 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-24 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-24 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-24 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10856-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Non-Magnetic Cable 36 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-36 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-36 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-36 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-36 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PEWCT1085 | Pasternack Enterprises |
| 0 | |||
| PE3C10854-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to SMP Female Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10854-12 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854-12 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854-12 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854-12 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10852-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMP Female Right Angle Non-Magnetic Cable 24 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10852-24 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852-24 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852-24 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852-24 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | LT1085IM-3-6-TRPBF | Analog Devices Inc | 11,855 | |||
| 1051085-1 | TE Connectivity | RF SMA Connector, 1 Contact(s), Female, Panel Mount, Solder Terminal, Jack RoHS : Compliant | 10,789 | |||
| LT1085CT-PBF | Analog Devices Inc | 10,697 | ||||
| RH1085K#PBF | Analog Devices Inc | Regulator, 1 Output, BIPolar RoHS : Compliant | 9,901 | |||
LD1085CDT![]() | STMicroelectronics | RoHS : Compliant | 9,684 | |||
| LT1085IT-PBF | Analog Devices Inc | 9,635 | ||||
LD1085PY![]() | STMicroelectronics | 9,501 | ||||
| OM11085-598 | NXP Semiconductors | 8,292 | ||||
| LM1085IS-5-0-NOPB | Texas Instruments | 7,451 | ||||
LD1085V90![]() | STMicroelectronics | RoHS : Not Compliant | 5,803 | |||
LD1085D2T18![]() | STMicroelectronics | 5,551 | ||||
LD1085D2T15![]() | STMicroelectronics | RoHS : Compliant | 5,033 | |||
| STA1085POA | STMicroelectronics | RoHS : Compliant | 3,910 | |||
| LM1085ISX-ADJ | National Semiconductor Corporation | Adjustable Positive LDO Regulator, 1.25V Min, 27.5V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 839 | |||
TDA1085CD![]() | onsemi | Universal Motor Controller, 0.2A, BIPolar, PDSO16 RoHS : Not Compliant | 681 | |||
![]() Win Source Electronics | TPS61085DGKR![]() | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant |
| 100,000 | |
| CLA4611-085LF | Skyworks Solutions Inc | 2 X 2 QFN PIN LIMITER DIODE RoHS : Compliant |
| 50,000 | ||
LM1085ISX-ADJ![]() | Texas Instruments | LM1085 3A Low Dropout Positive Regulators | IC REG LIN POS ADJ 3A DDPAK RoHS : Not Compliant |
| 31,500 | ||
LM1085IS-ADJ/NOPB![]() | Texas Instruments | IC REG LDO ADJ 3A DDPAK RoHS : Compliant |
| 28,480 | ||
TPS61085TPWR![]() | Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP / Boost Switching Regulator IC Positive Adjustable 2.8V 1 Output 2A (Switch) 8-TSSOP (0.173", 4.40mm Width) RoHS : Compliant |
| 22,000 | ||
| ADM1085AKSZ | Analog Devices Inc | Processor Supervisor 0.6V 1 Active High/Open Drain 6-Pin SC-70 Reel |
| 15,000 | ||
ADM1085AKS-REEL7![]() | Analog Devices Inc | Volt Supervisor Sequencer 0V to 22V 6-Pin SC-70 T/R RoHS : Not Compliant |
| 13,630 | ||
TPS61085PW![]() | Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP RoHS : Compliant |
| 13,446 | ||
LM1085IS-3.3![]() | Texas Instruments | IC REG LDO 3.3V 3A DDPAK RoHS : Not Compliant |
| 8,810 | ||
| 52207-1085 | Molex | 1.00mm (.039") Pitch FFC/FPC Connector, SMT, Right Angle, ZIF, Top Contact StyleReceptacle, 10 Circuits, Lead-free, High Barrier Packaging RoHS : Compliant |
| 3,610 | ||
TPS61085DGKT![]() | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant |
| 1,293 | ||
LT1085CM-3.3#TRPBF![]() | Linear Technology | IC REG LDO 3.3V 3A D2PAK RoHS : Compliant |
| 1,027 | ||
LT1085CT![]() | Linear Technology | LT1085 - 1 to 60 MHz, Stratum 3 RoHS : Not Compliant |
| 1,000 | ||
LT1085CT#PBF![]() | Linear Technology | IC REG LDO ADJ 3A TO220-3 RoHS : Compliant |
| 920 | ||
LD1085D2T-R![]() | STMicroelectronics | IC REG LDO ADJ 3A D2PAK RoHS : Compliant |
| 386 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |