| поискавой системы для электроныых деталей |
|
1074N1-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | 11074 | Keystone Electronics Corp | Circuit Board Hardware - PCB Insulated 0.585 in x 0.172 in RoHS : Compliant | 16,218 | ||
| MCR006YLPF1074 | ROHM Semiconductor | 方形贴片电阻器 (MCR系列) <车载品 *对应AEC-Q200> RoHS : Compliant |
| 15,000 | ||
| LT1074IT7#PBF | Analog Devices Inc | RoHS : Compliant | 50 | |||
![]() ComSIT USA | C10747795000 | APXRF | AVAILABLE EU | 651 | ||
![]() NexGen Digital | 2107-4062 | Molex | 521 | |||
| C10-747795-000 | Amphenol Corporation | RoHS : Compliant | 40 | |||
| 66107-4 | TE Connectivity | RoHS : Compliant | 20 | |||
![]() Richardson RFPD | LT1074IT#06PBF | Analog Devices Inc | Conv DC-DC 7.3V to 45V Step Down Single-Out 2.21V RoHS : Compliant |
| 0 | |
| ADP1074-EVALZ | Analog Devices Inc | ADP1074 Current Mode PWM Controller 12.1VDC Output RoHS : Compliant |
| 0 | ||
| R141074000W | Radiall | RF Coax Cable Mt Con RoHS : Compliant | 0 | |||
| 85107422 | HUBER+SUHNER | Multi-Coaxial Jumper, 2x8, (Male) to (Male), 50 Oh RoHS : Compliant |
| 0 | ||
| R141074000 | Radiall | Conn BNC 0Hz to 4GHz 50Ohm Crimp ST Cable Mount PL RoHS : Compliant | 0 | |||
| SI5332ED10747-GM1 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 333.33MHz-OUT 3 RoHS : Compliant | 0 | |||
| LT1074CT7#06PBF | Analog Devices Inc | Conv DC-DC 7.3V to 45V Synchronous Step Down Singl RoHS : Compliant |
| 0 | ||
| LT1074HVCT7#PBF | Analog Devices Inc | Conv DC-DC 7.3V to 64V Synchronous Step Down Singl RoHS : Compliant |
| 0 | ||
| 107482-HMC340ALP5 | Analog Devices Inc | HMC340ALP5/HMC340ALP5E Up-Down Converter and Mixer RoHS : Compliant | 0 | |||
| SI5341A-D11074-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 1028MHz-OUT 64- RoHS : Compliant | 0 | |||
| LT1074HVIT#30PBF | Analog Devices Inc | Conv DC-DC 7.3V to 64V Step Down Single-Out 2.21V RoHS : Compliant |
| 0 | ||
| SI5345A-D10741-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
SMS7621-074LF![]() | Skyworks Solutions Inc | Diode RF Schottky 2V 75mW 3-Pin SC-70 T/R RoHS : Compliant | 0 | |||
| ADP1074WARWZ-RL | Analog Devices Inc | DC/DC Cntrlr Single-OUT Flyback 660kHz Automotive RoHS : Compliant |
| 0 | ||
| LT1074HVIT7#PBF | Analog Devices Inc | Conv DC-DC 7.3V to 64V Synchronous Step Down Singl RoHS : Compliant |
| 0 | ||
![]() Rutronik | P/N1074 | Keystone Electronics Corp | HOLDERCOIN20MM V THM SLIMLINE RoHS : Compliant |
| 200 | |
![]() Avnet Asia | RK73H1JTTD1074F | KOA Speer Electronics Inc | THICK FILM RESISTORS 1.07M OHM 1% (Alt: RK73H1JTTD1074F) RoHS : Compliant | 0 | ||
| 1074959 | Qorvo | (Alt: 1074959) RoHS : Compliant | 0 | |||
| NCP81074BMNTBG | onsemi | (Alt: NCP81074BMNTBG) RoHS : Compliant | 0 | |||
| 10-748171-P13 | Amphenol Corporation | (Alt: 10-748171-P13) RoHS : Compliant | 0 | |||
| 0513381074 | Molex | Mezzanine Connector, Receptacle, 100 Contacts, 2 Rows, 0.4mm, Gold, SMT, Straight, Phosphor Bronze (Alt: 0513381074) RoHS : Compliant | 0 | |||
| 34-1074 | Amphenol Corporation | (Alt: 34-1074) RoHS : Compliant | 0 | |||
| 0559091074 | Molex | Mezzanine Connector, Plug, 100 Contacts, 2 Rows, 0.4mm, Gold, SMT, Straight, Brass, Solder (Alt: 0559091074) RoHS : Compliant | 0 | |||
| NOMC107-443T5 | Vishay Intertechnologies | RESISTOR NETWORKS & ARRAYS MOLDEDCUSTOM (Alt: NOMC107-443T5) RoHS : Compliant | 0 | |||
| NOMCT107-443T5 | Vishay Intertechnologies | (Alt: NOMCT107-443T5) RoHS : Compliant | 0 | |||
| NCP81074AMNTBG | onsemi | Small (Alt: NCP81074AMNTBG) RoHS : Compliant | 0 | |||
| R7FA0L1074CFJ#YJ1 | Renesas Electronics Corporation | (Alt: R7FA0L1074CFJ#YJ1) RoHS : Compliant | 0 | |||
| 0529011074 | Molex | (Alt: 0529011074) RoHS : Compliant | 0 | |||
| 0688010745 | Molex | (Alt: 0688010745) RoHS : Compliant | 0 | |||
| 0688010747 | Molex | (Alt: 0688010747) RoHS : Compliant | 0 | |||
0877591074![]() | Molex | Pin Header, 10 Contacts, 2 Rows, 2mm, Gold, 2A, Straight, Unshrouded, Phosphor Bronze, SMT (Alt: 0877591074) RoHS : Compliant | 0 | |||
![]() Avnet Silica | NCP81074ADR2G | onsemi | Small (Alt: NCP81074ADR2G) RoHS : Compliant | 0 | ||
| NCP81074BDR2G | onsemi | Small (Alt: NCP81074BDR2G) RoHS : Compliant | 0 | |||
| NCP81074BMNTBG | onsemi | Small (Alt: NCP81074BMNTBG) RoHS : Compliant | 0 | |||
| NCP81074AMNTBG | onsemi | Small (Alt: NCP81074AMNTBG) RoHS : Compliant | 0 | |||
BUK7107-40ATC,118![]() | Nexperia | Trans MOSFET NCH 40V 140A 5Pin4Tab D2PAK TR (Alt: BUK7107-40ATC,118) RoHS : Compliant | 0 | |||
| R7FA0L1074CFL#BA0 | Renesas Electronics Corporation | (Alt: R7FA0L1074CFL#BA0) RoHS : Compliant | 0 | |||
| R7FA0L1074CSC#HA0 | Renesas Electronics Corporation | (Alt: R7FA0L1074CSC#HA0) RoHS : Compliant | 0 | |||
| R7FA2T1074CFL#UA0 | Renesas Electronics Corporation | ARM CM23 64MHz ROMRAM64KB8KB Data Flash 2KB 125 48Pin LQFP (Alt: R7FA2T1074CFL#UA0) RoHS : Compliant | 0 | |||
| R7FA0L1074CFL#UA0 | Renesas Electronics Corporation | (Alt: R7FA0L1074CFL#UA0) RoHS : Compliant | 0 | |||
DSC1001DI1-074.2500![]() | Microchip Technology Inc | MEMS Oscillator 7425 MHz SMD 25mm x 2mm 50 ppm 33 V DSC1001 (Alt: DSC1001DI1-074.2500) RoHS : Compliant | 0 | |||
| EX-4000-EAE-1074-40M0000000 | Microchip Technology Inc | Oscillator 40 MHz 100 ppb Through Hole 208mm x 132mm 33 V HCMOS EMXO (Alt: EX-4000-EAE-1074-40M0000000) RoHS : Not Compliant | 0 | |||
| SIT9375AI-02B3-3310-74.250000 | SiTime Corporation | (Alt: SIT9375AI-02B3-3310-74.250000) RoHS : Compliant | 0 | |||
| SIT9396AE-02B3-2510-74.250000G | SiTime Corporation | SiT9396 40 to 105C UltraLow Jitter Differential XO for Automotive 74250000 MHz (Alt: SIT9396AE-02B3-2510-74.250000G) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | 301-1010-74 | Digi International Inc | Digi Hubport/7c 5.5-30VDC powered USB 2.0 hub, extended temp -40C to 70C, non-captive USB connector (includes 1meter power connector pigtail and 5 meter A to B USB cable) |
| 0 | |
| CAB.01074 | Taoglas Antenna Solutions | IPEX MHF4L(HSC comp) to 200mm 1.13mm Black IPEX MHF4L(HSC comp) |
| 0 | ||
![]() Chip-Germany GmbH | 87759-1074 | Molex | RoHS : Compliant | 10 | ||
![]() DB Roberts | BN1074M4 | Bossard Group |
| 2,215 | ||
| 1074 | Heyco | SR 3A-4 BLACK | 0 | |||
| 1107-4-AMODL=.200-7 | RAF Electronic Hardware | 0 | ||||
| 10743 | Heyco | HSCBS5-09 NATURAL | 0 | |||
| 1107-4-SSMODL=1/16 | RAF Electronic Hardware | 0 | ||||
| 12SWS1074B | Essentra Components | SHOULDER WASHER, .197 ID, .394 | 0 | |||
| 10740F | Heyco | HSCBS5-06 V-0 NATURAL | 0 | |||
| 110746 | Essentra Components | 0 | ||||
| X107451 | RAF Electronic Hardware | 0 | ||||
| 110742 | Essentra Components | 0 | ||||
| 2107-440-AL-9 | RAF Electronic Hardware | 2107-440-AL STND ALM STND OFF F/F AOLDINE 1200 FINISH | 0 | |||
| 2107-440-AL-7 | RAF Electronic Hardware | 2107-440-AL-7 STAND ALUM F-F STANDOFF CLR IRIDITE | 0 | |||
| 110740 | Essentra Components | 0 | ||||
| X107451 ISSUE.1-12 | RAF Electronic Hardware | 0 | ||||
| 1107-4-AL-24 | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | NCP81074ADR2G | onsemi | Small (Alt: NCP81074ADR2G) RoHS : Compliant | 0 | ||
| NCP81074BDR2G | onsemi | Small (Alt: NCP81074BDR2G) RoHS : Compliant | 0 | |||
| NCP81074BMNTBG | onsemi | Small (Alt: NCP81074BMNTBG) RoHS : Compliant | 0 | |||
| BCM8910740BFBG | Broadcom Limited | Communication ICs (Alt: BCM8910740BFBG) RoHS : Compliant | 0 | |||
| NCP81074AMNTBG | onsemi | Small (Alt: NCP81074AMNTBG) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 66107-4 | TE Connectivity | Backshells & Ac RoHS : Compliant | 3 | ||
| 440HS069N2107-4 | Glenair Inc | Backshells & Ac RoHS : Not Compliant | 0 | |||
| 801-074-07M16-12PSA | Glenair Inc | Connector | 0 | |||
| 107-4-J-WM250 | HellermannTyton | Harness Mgmt | 0 | |||
| 1107-4-G | HellermannTyton | Harness Mgmt | 0 | |||
| 107-4-J-W1 | HellermannTyton | Harness Mgmt | 0 | |||
| 107-4-J-W21 | HellermannTyton | Harness Mgmt | 0 | |||
| 107-4-G-W1 | HellermannTyton | Harness Mgmt | 0 | |||
| 1107-4-B7 | HellermannTyton | Harness Mgmt | 0 | |||
| A1074C | TE Connectivity | Relays | 0 | |||
| 1107-4-G-WM250 | HellermannTyton | Harness Mgmt | 0 | |||
| 1107-4-G-W21 | HellermannTyton | Harness Mgmt | 0 | |||
| M85049/10-74N | Glenair Inc | Connector | 0 | |||
| M85049/10-74N | Amphenol PCD | Backshells & Ac |
| 0 | ||
| 440GS074NF1107-4K | Glenair Inc | Connector | 0 | |||
![]() Flip Electronics | R7FA0L1074CSC#HA0 | Renesas Electronics Corporation | Stock | 4,000 | ||
| R7FA2T1074CFJ#BA0 | Renesas Electronics Corporation | Stock | 2,000 | |||
![]() Maritex | 536471074 | Molex | Rectangular Connectors - Arrays, Edge Type, Mezzanine (Board-to-Board); 536471074; MOLEX; 2; Gold; Vertical; Yes RoHS : Compliant |
| 15,329 | |
| 99.610.7491.0 | Wieland Electric GmbH | Connector RST20I3K1B-15H 20SW; 3-pin; plug; female; 16A; black; cable length 2000 |
| 4 | ||
![]() Master Electronics | 901-10743 | Amphenol RF | The 901-10743 is an IP67-rated 50 Ohm SMA bulkhead crimp jack designed for use with RG-316DB cable. RoHS : Compliant |
| 100 | |
| 1074 | Heyco | SR 3A-4 BLACK Heyco® Original Strain Relief Bushings Straight-Thru SR for Flat RoHS : Compliant |
| 0 | ||
| 096521-0747 | ITT Interconnect Solutions | MDM96521-747 / 096521-0747 / Micro RoHS : Compliant |
| 0 | ||
| 2-1470107-4 | TE Connectivity | 2.0MM PITCH CRIMP HOUSING 24P MOQ Reduction RoHS : Compliant |
| 0 | ||
| 99-9107-490-03 | Franz Binder GmbH & Co | Snap-In IP67 (miniature) Male panel mount connector Contacts: 3 unshielded THT IP67 RoHS : Compliant |
| 0 | ||
| 52885-1074-TR250 | Molex | Conn Board to Board RCP 100 POS 0.635mm Solder ST SMD SlimStack™ T/R RoHS : Compliant |
| 0 | ||
| 702171074 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| HTSW-107-41-G-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-107-41-STL-S-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-107-41-T-Q-RA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-107-42-LM-D-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-171-074 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| K1121074 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| RCV-00110742 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| MW-15-03-G-D-141-074-ES-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1610740000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories PTSC KA 2.2X4.5 WN1412 RoHS : Compliant |
| 50 | |
| 3-107-465 | Schurter Electronic Components | AC Power Entry Modules DD12 IEC Appliance Inlet C14 with Filter, 1 A, Standard Version, Snap-in mounting, Fuseholder 2-pole, Line Switch 2-pole, non-illuminated, black RoHS : Compliant |
| 50 | ||
| 1074600000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories WAP WTR2.5/ZZ RoHS : Compliant |
| 50 | ||
| 301-1010-74 | Digi International Inc | Digi Hubport/7c 5.5-30VDC powered USB 2.0 hub, extended temp -40C to 70C, non-captive USB connector (includes 1meter power connector pigtail and 5 meter A to B USB cable) |
| 50 | ||
| 1410745 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-5P-3,0- PUR/M12 FRB RoHS : Compliant |
| 50 | ||
| 1074000000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks WZR WDK2.5 RoHS : Compliant |
| 15 | ||
| 3-107-466 | Schurter Electronic Components | AC Power Entry Modules DD12 IEC Appliance Inlet C14 with Filter, 2 A, Standard Version, Snap-in mounting, Fuseholder 2-pole, Line Switch 2-pole, non-illuminated, black RoHS : Compliant |
| 9 | ||
| PSGV 3M-1-RSK 4T/S1057/CS10743 | TURCK Inc | Cordset; P1: Str M8 Male 3pos to P2: Str M12 Male 4 pos, P11/P21/P23: NC, P13-P24, P14-P22, 2 Wire; 1m; PVC; Black; U0950-55 |
| 0 | ||
| 107405 | Basler AG | Vision Sensors The acA4024-29uc USB 3.0 camera with the IMX226 CMOS sensor delivers 31 frames per second at 12.2 MP Resolution. RoHS : Compliant |
| 0 | ||
| AXG1074101429/1 | Axiom Manufacturing | AXIOM 32GB DDR5-4800 RDIMM TAA |
| 0 | ||
| 1074037 | SICK AG | Inductive prox sensor; IME08-03BPSZT0K, M8 Barrel Quasi-flush, R: 3mm, 10-30VDC, PNP NO, M8 Conn RoHS : Compliant |
| 0 | ||
| 107404 | Basler AG | Cameras & Camera Modules The acA4024-29um USB 30 camera with the IMX226 CMOS sensor delivers 31 frames per second at 122 MP Resolution |
| 0 | ||
| 107409 | Basler AG | Vision Sensors The acA4024-8gc GigE camera with the IMX226 CMOS sensor delivers 8 frames per second at 12.2 MP Resolution. |
| 0 | ||
| 3-107-467 | Schurter Electronic Components | AC Power Entry Modules DD12 IEC Appliance Inlet C14 with Filter, 4 A, Standard Version, Snap-in mounting, Fuseholder 2-pole, Line Switch 2-pole, non-illuminated, black RoHS : Compliant |
| 0 | ||
| 107408 | Basler AG | Vision Sensors The acA4024-8gm GigE camera with the IMX226 CMOS sensor delivers 8 frames per second at 12.2 MP Resolution. |
| 0 | ||
![]() Pasternack Enterprises US | PE3W10742-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Male to N Female Bulkhead Cable 72 Inch Length Using RG400 Coax., Radio frequency assembly N male to N female bulkhead cable 72 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female bulkhead cable 72 inch length using RG400 coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W10742-72 can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to N type jack cable assembly PE3W10742-72 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10742-72 can also be used in the other direction and will be N type female bulkhead to N type male cable assembly if the opposite connectivity is required. Type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 72 inch length using RG400 coax. |
| 233 | |
| PEWCA1074 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-75, Coax Connector Impedance: 50 Ohm, Coax Connector Series: N, Coax Connector Gender: Female, Waveguide Adapter Style: End Launch, Minimum Frequency: 10 GHz, Maximum Frequency: 15 GHz. WR-75 Square Cover Flange to End Launch Type N Female Waveguide to Coax Adapter, 10 GHz to 15 GHz, M Band, Aluminum, Paint. PEWCA1074 WR-75 waveguide to coax adapter is also known as a WR-75 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR-75 to N type connector and has a female gender. Our WR75 to type N female waveguide adapter transition has a end launch design and has a square cover flange. Pasternack end launch WR-75 to type N waveguide to coaxial cable transition / adapter has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. WR 75 waveguide to N type transition adapter to coax PEWCA1074 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-75 waveguide adapter transition with type N interface can ship worldwide the same day that it is purchased as with our other available RF parts. |
| 4 | ||
| PE3C10745-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 1.85mm Male to 2.4mm Male Cable 9 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10745-9 1.85mm male to 2.4mm male RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.4mm cable connection on the other. Our 1.85mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C10745-9 can also be known as a 1.85mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C10745-9 1.85mm plug to 2.4mm plug cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10745-9 can also be used in the other direction and will be a 2.4mm male to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.4mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10744-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to 1.85mm Female Bulkhead Cable 6 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10744-6 1.85mm male to 1.85mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 1.85mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm bulkhead cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10744-6 can also be known as a 1.85mm plug to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. Our 1.85mm male to bulkhead 1.85mm female cable has a maximum VSWR of 1.4:1. This PE3C10744-6 1.85mm plug to 1.85mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10744-6 can also be used in the other direction and will be a 1.85mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 1.85mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10743-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to 1.85mm Male Cable 6 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10743-6 1.85mm male to 1.85mm male RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 1.85mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a male gender on end 1 and a male on end 2. PE3C10743-6 can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. Our 1.85mm male to 1.85mm male cable has a maximum VSWR of 1.4:1. This PE3C10743-6 1.85mm plug to 1.85mm plug cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. This 1.85mm plug to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm RF cable assembly as per your requirements. |
| 1 | ||
| PE91074 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: ZMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None. Precision SMA Female to ZMA Jack Adapter, 3 Lug. SMA adapter PE91074 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to ZMA adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. SMA female to ZMA jack adapter is one of the many RF components that ship same day as they are ordered. PE91074 female SMA to jack ZMA adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our female SMA to jack ZMA adapter PE91074 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 3 lug SMA to ZMA radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 1 | ||
| PE3C10748-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 2.92mm Male Cable 12 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10748-12 1.85mm male to 2.92mm male RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.92mm cable connection on the other. Our 1.85mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C10748-12 can also be known as a 1.85mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This PE3C10748-12 1.85mm plug to 2.92mm plug cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10748-12 can also be used in the other direction and will be a 2.92mm male to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10740 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Cable Using RG174 Coax. PE3W10740 is a SMA male right angle to SMA male cable using RG174 coax. This Pasternack SMA male right angle to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10740 SMA male right angle to SMA male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C10748 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. 1.85mm Male to 2.92mm Male Cable Using PE-SR405FL Coax., Pasternack’s PE3C10748 1.85mm male to 2.92mm male RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.92mm cable connection on the other. Our 1.85mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C10748 can also be known as a 1.85mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This PE3C10748 1.85mm plug to 2.92mm plug cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10748 can also be used in the other direction and will be a 2.92mm male to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.92mm RF cable assembly as per your requirements. | 0 | |||
| PE3C10742 | Pasternack Enterprises | 0 | ||||
| PE3W21074 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to MMCX Jack Cable Using LMR-100 Coax. PE3W21074 is a BNC female bulkhead to MMCX jack cable using LMR-100A coax. This Pasternack BNC female bulkhead to MMCX jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm MMCX for connector 2. Our female BNC bulkhead to jack MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21074 BNC female bulkhead to MMCX jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C1074/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly MMCX plug right angle to MMCX plug right angle low loss cable 48 inch length using LMR-100 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug right angle to MMCX plug right angle low loss cable 48 inch length using LMR-100 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle MMCX cable connection on one end and a right angle MMCX cable connection on the other. Our low loss right angle MMCX to right angle MMCX cable assembly has a plug gender on end 1 and a plug on end 2. PE3C1074/SP-48 can also be known as a low loss right angle MMCX male to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1074/SP-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle MMCX plug to right angle MMCX plug cable has a maximum VSWR of 1.4:1. MMCX male to MMCX male cable assembly PE3C1074/SP-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss MMCX right angle male to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1074 | Pasternack Enterprises | 0 | ||||
| PE3W10740/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using RG174 Coax with HeatShrink. PE3W10740/HS is a SMA male to SMA male right angle cable using RG174 coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10740/HS SMA male to SMA male right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C10740 | Pasternack Enterprises | 0 | ||||
![]() TE Connectivity | 2308107-4 | TE Connectivity | DDR4 DIMM 288 PIN TH TYPE DRAM Type: Double Data Rate (DDR) 4 Connector System: Board-to-Bus Bar Number of Positions: 288 Termination Method to PCB: Through Hole - Solder Module Orientation: Vertical Double Data Rate (DDR) 4 Board-to-Bus Bar 288 Through Hole - Solder | Dimm | Part Number: 2308107-4 | Internal Number: 2308107-4 | TE Connectivity RoHS : Compliant |
| 6,990 | |
| 2273107-4 | TE Connectivity | M12 Y conn Male to 2xM12 Female A Cable Assembly Type: M12 to M12 Number of Positions: 4 Cable Assembly Length: 1.5 m Cable Assembly Length: 4.9 ft M8/M12 Application Type: Sensor/Actuator M12 to M12 4 1.5 m 4.9 ft | M12 A-Code Y-Cable Assembly | Part Number: 2273107-4 | Internal Number: 2273107-4 | TE Connectivity RoHS : Compliant |
| 25 | ||
![]() Venkel Ltd. | CR0201-20W-1074FT | VENKEL LTD | Chip Resistor;0201;1/20W;1.07M;�1% RoHS : Compliant | 135,000 | ||
| AGCR2512-XL-1074FT | VENKEL LTD | Auto Grade Resistor;2512;1W;�200PPM;1.07M;�1% RoHS : Compliant | 0 | |||
| MELFC0204-TC-1074DT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;1.07M;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-1074BT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;1.07M;�0.1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-1074DT | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;1.07M;�0.5% RoHS : Compliant | 0 | |||
| CR0805-10W-1074DT | VENKEL LTD | Chip Resistor;0805;1/10W;1.07M;�0.5% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-1074DT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;1.07M;�0.5% RoHS : Compliant | 0 | |||
| PWCR0805-RK-1074DT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;1.07M;�0.5% RoHS : Compliant | 0 | |||
| PWCR1210-VK-1074FT | VENKEL LTD | Pulse Withstanding CR;1210;1/2W;�100PPM;1.07M;�1% RoHS : Compliant | 0 | |||
| CR2010-2W-1074FT | VENKEL LTD | Chip Resistor;2010;1/2W;1.07M;�1% RoHS : Compliant | 0 | |||
| CRG1210-U-1074FT | VENKEL LTD | RoHS 10/10 Green CR;1210;1/3W;1.07M;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-K-1074BT | VENKEL LTD | Thin Film CR;2512;1/2W;�100PPM;1.07M;�0.1% RoHS : Compliant | 0 | |||
| HVCR2010-2W-1074FT | VENKEL LTD | High Voltage CR;2010;1/2W;1.07M;�1% RoHS : Compliant | 0 | |||
| CR1206-4W-1074FT | VENKEL LTD | Chip Resistor;1206;1/4W;1.07M;�1% RoHS : Compliant | 0 | |||
| CRG0805-R-1074FT | VENKEL LTD | RoHS 10/10 Green CR;0805;1/8W;1.07M;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | ADP1074-EVALZ | Analog Devices Inc | RoHS : Compliant | 11,675 | ||
BUK7107-40ATC,118![]() | Nexperia | Power Field-Effect Transistor, 75A I(D), 40V, 0.007ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 9,429 | |||
74AC11074PWR![]() | Texas Instruments | D Flip-Flop, AC Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO14 RoHS : Compliant | 9,001 | |||
74AC11074DG4![]() | Texas Instruments | D Flip-Flop, AC Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO14 RoHS : Compliant | 8,895 | |||
74AC11074DRE4![]() | Texas Instruments | D Flip-Flop, AC Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO14 RoHS : Compliant | 7,695 | |||
| LT1074MK | Analog Devices Inc | Switching Regulator/Controller | 6,751 | |||
| 2-1470107-4 | TE Connectivity | Board Connector, 24 Contact(s), 2 Row(s), Female, Crimp Terminal, White Insulator, Receptacle RoHS : Compliant | 6,740 | |||
BUK9107-40ATC,118![]() | Nexperia | Power Field-Effect Transistor, 75A I(D), 40V, 0.0077ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 6,240 | |||
| LT1074IT-PBF | Analog Devices Inc | 6,068 | ||||
74ACT11074DRG4![]() | Texas Instruments | D Flip-Flop, ACT Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO14 RoHS : Compliant | 5,023 | |||
74ACT11074DBRG4![]() | Texas Instruments | D Flip-Flop, ACT Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO14 RoHS : Compliant | 3,849 | |||
| SNJ54ACT11074J | Texas Instruments | D Flip-Flop, 2-Func, Positive Edge Triggered, CMOS, CDIP14 RoHS : Not Compliant | 3,693 | |||
74ACT11074DG4![]() | Texas Instruments | D Flip-Flop, ACT Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO14 RoHS : Compliant | 3,685 | |||
| 74AC11074DBLE | Texas Instruments | Jbar-Kbar Flip-Flop, 2-Func, Positive Edge Triggered, CMOS, PDSO14 RoHS : Not Compliant | 3,223 | |||
LT1074IT#06PBF![]() | Linear Technology | Switching Regulator, 8.5A, 125kHz Switching Freq-Max, BIPolar, PZFM5 RoHS : Compliant | 606 | |||
![]() Win Source Electronics | ASM1074 | Asmedia Technology Inc |
| 32,000 | ||
| ASM1074L | Asmedia Technology Inc |
| 29,780 | |||
| NCP81074AMNTBG | onsemi | IC GATE DRVR LOW-SIDE 8DFN / High Speed Low-Side MOSFET Driver RoHS : Compliant |
| 12,000 | ||
LT1074CT![]() | Linear Technology | Step-Down Switching Regulator RoHS : Not Compliant |
| 3,980 | ||
LT1074CT7#PBF![]() | Linear Technology | IC REG MULT CONFIG INV ADJ TO220 RoHS : Compliant |
| 3,937 | ||
LT1074CT7![]() | Linear Technology | Step-Down Switching Regulator RoHS : Not Compliant |
| 3,937 | ||
| 0513381074 | Molex | CONN RCPT 100POS SMD GOLD RoHS : Compliant |
| 1,600 | ||
| 51338-1074 | Molex | 0.4BTB RECHSGASSYJ-BENDTL100CKTE / Position Connector RoHS : Compliant |
| 301 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |