048L-100CWC Price, дистрибьютор, Stock

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Female Bulkhead to MCX Plug Right Angle Low Loss Cable 48 Inch Length Using LMR-195 Coax., Radio frequency assembly TNC female bulkhead to MCX plug right angle low loss cable 48 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to MCX plug right angle low loss cable 48 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and right angle MCX cable connection on the other. Our low loss TNC to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. PE3W04810-48 can also be known as a low loss TNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. TNC jack to MCX male cable assembly PE3W04810-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle MCX cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04810-48 can also be used in the other direction and will be right angle MCX plug to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to MCX cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to MCX plug right angle low loss cable 48 inch length using LMR-195 coax.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

1,328

PE3W04805LF/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to TNC Male Right Angle Low Loss Cable Using LMR-400-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male right angle to TNC male right angle low loss cable using LMR-400-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male right angle low loss cable using LMR-400-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle TNC cable connection on the other. Our low loss right angle type N to right angle TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W04805LF/HS can also be known as a low loss right angle type N plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04805LF/HS RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W04805LF/HS is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04805LF/HS can also be used in the other direction and will be a right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3W04802-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMP Female Right Angle to SMP Female Right Angle Cable 48 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female right angle to SMP female right angle cable 48 inch length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to SMP female right angle cable 48 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3W04802-48, can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W04802-48 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable 48 inch length using PE-047SR coax.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE3C4460-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 48 inches. SSMC Plug Right Angle to SSMC Jack Right Angle Bulkhead Cable 48 Inch Length Using RG178 Coax., Radio frequency assembly SSMC plug right angle to SSMC jack right angle bulkhead cable 48 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug right angle to SSMC jack right angle bulkhead cable 48 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SSMC cable connection on one end and right angle SSMC bulkhead cable connection on the other. Our right angle SSMC to right angle SSMC cable assemblies have a plug gender on end 1 and jack on end 2. This SSMC to SSMC cable is a plug to jack coax assembly, PE3C4460-48, can also be known as a right angle SSMC male to right angle SSMC female cable assembly and will be shipped same-day as it is purchased. SSMC male to SSMC female cable assembly PE3C4460-48 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with right angle SSMC to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMC right angle plug to SSMC right angle jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4460-48 can also be used in the other direction and will be right angle SSMC jack bulkhead to right angle SSMC plug cable assembly if the opposite connectivity is required. SSMC right angle male to SSMC right angle female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SSMC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug right angle to SSMC jack right angle bulkhead cable 48 inch length using RG178 coax.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE3C9830-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female Bulkhead to SMA Male Low Loss Cable 48 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly N female bulkhead to SMA male low loss cable 48 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SMA male low loss cable 48 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3C9830-48 can also be known as a low loss type N jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N jack to SMA plug cable assembly PE3C9830-48 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9830-48 can also be used in the other direction and will be SMA male to N type female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male low loss cable 48 inch length using TCOM-240 coax with Times Microwave components.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

PE3MSA00480-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly lead free 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00480-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00480-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable.

1 : $201.99
25 : $191.89
50 : $181.79
100 : $173.71

PE3MSA00486-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Lead Free Bend Relief 3-Lug TRB Jack to Jack for PE-30-02003, 60 Inch Cable., Radio frequency assembly lead free bend relief 3-Lug TRB jack to jack for PE-30-02003, 60 inch cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free bend relief 3-Lug TRB jack to jack for PE-30-02003, 60 inch cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00486-60 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00486-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free bend relief 3-Lug TRB jack to jack for PE-30-02003, 60 inch cable.

1 : $216.99
25 : $206.14
50 : $195.29
100 : $186.61

PE3C7960-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 48 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Low PIM Cable 48 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle low PIM cable 48 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male right angle low PIM cable 48 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C7960-48, can also be known as a low PIM 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C7960-48 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7960-48 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle low PIM cable 48 inch length using TFT-402 coax using Times Microwave components.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE3M0020-48

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 48 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Cable 48 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male cable 48 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male cable 48 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/55-3028 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 N type bulkhead cable connection on one end and M39012/55-3028 SMA cable connection on the other. Our M39012/03-0503 type N to M39012/55-3028 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 N type to M39012/55-3028 SMA cable is a female to male coax assembly, PE3M0020-48, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to M39012/55-3028 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/55-3028 SMA plug cable assembly PE3M0020-48 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to M39012/55-3028 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/55-3028 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0020-48 can also be used in the other direction and will be M39012/55-3028 SMA male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/55-3028 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/55-3028 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male cable 48 inch length using M17/60-RG142 coax.

1 : $346.99
25 : $329.64
50 : $312.29

PE3M0390-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMPS, Connector 1 Size: 16, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Size: 16, Connector 2 Gender: Pin, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, RF Cable Part Number: PE-P047, RF Cable Type: Coax, RF Cable Specification: PE-P047 datasheet, RF Cable Impedance : 50 Ohm. SMPS Size 16 Contact Pin to SMPS Size 16 Contact Pin Cable 48 Inch Length Using PE-P047 Coax with HeatShrink, LF Solder. The PE3M0390-48 from Pasternack is a D38999 contact cable assembly that is built with a size 16 SMPS pin contact connection on one end and a SMPS pin connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This SMPS to SMPS cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 50 GHz. The PE3M0390-48 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our SMPS pin to SMPS pin cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The PE3M0390-48 in-series RF cable has 90 dB of minimum RF shielding. SMPS pin to SMPS pin cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack PE3M0390-48 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this SMPS to SMPS RF cable are available on our downloadable PDF datasheet. SMPS pin to SMPS pin cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMPS RF cable assembly as per your requirements.

1 : $239.99
10 : $230.39
25 : $220.79
100 : $211.19

PE3W04814

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm.

PE3W04896

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm TNC Male Right Angle to 75 Ohm TNC Female Bulkhead Cable Using 75 Ohm RG179 Coax. PE3W04896 is a TNC male right angle to TNC female bulkhead cable using RG179 coax. This Pasternack TNC male right angle to TNC female bulkhead cable assembly uses a 75 Ohm TNC for connector 1 and a 75 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W04896 TNC male right angle to TNC female bulkhead cable assembly is constructed with RG179 coax.

PE3W09560-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SSMA Male Right Angle to Push-On SMP Female Right Angle Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly SSMA male right angle to push-on SMP female right angle cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male right angle to push-on SMP female right angle cable 48 inch length using RG316 coax, SSMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SSMA cable connection on one end and right angle SMP cable connection on the other. Our right angle SSMA to right angle SMP cable assemblies have a male gender on end 1 and female on end 2. PE3W09560-48 can also be known as a right angle SSMA plug to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SSMA plug to SMP jack cable assembly PE3W09560-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with right angle SSMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMA right angle male to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09560-48 can also be used in the other direction and will be right angle SMP female to right angle SSMA male cable assembly if the opposite connectivity is required. SSMA right angle plug to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SMP cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA male right angle to push-on SMP female right angle cable 48 inch length using RG316 coax.

1 : $130.99
25 : $124.44
50 : $117.89
100 : $112.65

PE3W10048/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MMCX Jack to TNC Male Cable Using LMR-100 Coax with HeatShrink. PE3W10048/HS is a MMCX jack to TNC male cable using LMR-100A coax. This Pasternack MMCX jack to TNC male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm TNC for connector 2. Our jack MMCX to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10048/HS MMCX jack to TNC male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W11000-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to Reverse Polarity SMA Jack Bulkhead Cable 48 Inch Length Using RG58 Coax., Radio frequency assembly TNC male to reverse polarity SMA jack bulkhead cable 48 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to reverse polarity SMA jack bulkhead cable 48 inch length using RG58 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our TNC to reverse polarity SMA cable assemblies have a male gender on end 1 and jack on end 2. PE3W11000-48 can also be known as a TNC plug to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. TNC plug to reverse polarity SMA female cable assembly PE3W11000-48 is built with RG58 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this TNC male to reverse polarity SMA jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11000-48 can also be used in the other direction and will be reverse polarity SMA jack bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to SMA reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to reverse polarity SMA jack bulkhead cable 48 inch length using RG58 coax.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

TE Connectivity

170485-1

TE Connectivity

DRAWER CONN LP Contact Mating Area Plating Material: Gold (Au) Contact Type: Hermaphroditic Wire Size: 20 – 16 AWG Operating Voltage: 250 VAC Wire Size: .503 – 1.419 mm² Gold (Au) Hermaphroditic 20 – 16 AWG 250 VAC | Connector Contact | Part Number: 170485-1 | Internal Number: 170485-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.36
500 : $1.4
250 : $1.44
100 : $1.49
50 : $1.53
1 : $1.68

33,670

2834048-2

TE Connectivity

PLUG, 2P LATCHED POKE-IN WTW CONN.BK Number of Positions: 2 Lighting Product Type: Connector Termination Method to Wire & Cable: Poke-In Connector System: Wire-to-Wire Centerline (Pitch): 4.5 mm Ballast Connector | 2 Connector Poke-In Wire-to-Wire | Part Number: 2834048-2 | Internal Number: 2834048-2 | 4.5 mm | TE Connectivity
RoHS : Compliant

25,000 : $0.22
10,000 : $0.23
5,000 : $0.23
2,500 : $0.24
1,000 : $0.24
500 : $0.25
250 : $0.25
100 : $0.25
50 : $0.26
25 : $0.26
10 : $0.27
1 : $0.27

12,913

8-61048-1

TE Connectivity

RECEPT,PIDG FASTON 22-18 110 Quick Disconnect Terminal Type: Receptacle Insulation Option: Partially Insulated Wire Size: 22 – 18 AWG Wire Size: .26 – .96 mm² Wire Size: 509 – 1900 CMA Receptacle Partially Insulated 22 – 18 AWG .26 – .96 mm² | Quick Disconnect | Part Number: 8-61048-1 | Internal Number: 8-61048-1 | TE Connectivity
RoHS : Compliant

2,500 : $1.08
1,000 : $1.11
500 : $1.14
250 : $1.17
100 : $1.2
50 : $1.23
25 : $1.26
10 : $1.29
1 : $1.32

4,995

RTE24048F

TE Connectivity

RTE24048F Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 8 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: RTE24048F | Internal Number: 3-1393237-4 | TE Connectivity
RoHS : Compliant

500 : $14.05
250 : $14.54
100 : $15.02
50 : $15.5
25 : $15.99
10 : $16.48
1 : $16.96

2,864

5-104809-4

TE Connectivity

05 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 5 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 5 | PCB Header & Receptacle | Part Number: 5-104809-4 | Internal Number: 5-104809-4 | TE Connectivity
RoHS : Compliant

2,500 : $2.68
1,000 : $2.76
500 : $2.83
250 : $2.9
100 : $2.97
50 : $3.05
25 : $3.12
10 : $3.19
1 : $3.26

1,964

2110487-1

TE Connectivity

QSFP Cage, Solder Leg, No HS Opening Pluggable Form Factor: QSFP+ Pluggable I/O Product Type: Cage Sealable: No Circuit Application: Signal Number of Ports: 1 QSFP+ Cage Signal | High Speed I/o | Part Number: 2110487-1 | Internal Number: 2110487-1 | TE Connectivity
RoHS : Compliant

1,000 : $10.41
500 : $10.7
250 : $11.04
100 : $11.4
50 : $11.74
1 : $12.88

1,386

RT424048

TE Connectivity

RT424048 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 8 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: RT424048 | Internal Number: 7-1393243-0 | TE Connectivity
RoHS : Compliant

500 : $9.46
250 : $9.79
100 : $10.11
50 : $10.44
25 : $10.77
10 : $11.1
1 : $11.42

1,192

ABC03N-20P-4048

TE Connectivity

IN-LINE RECP Number of Positions: 5 Connector & Housing Type: Receptacle Mating Alignment: With Mating Alignment Type: Keyed Mating Retention Type: Latching Feature Standard Rectangular Connector | 5 Receptacle With Keyed | Part Number: ABC03N-20P-4048 | Internal Number: ABC03N-20P-4048 | Alias Number: ZPF000000000147718 | TE Connectivity
RoHS : Compliant

1 : $69.94

809

PT571048

TE Connectivity

PT571048 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 4 Form C 4PDT-CO Contact Current Rating: 6 A General Purpose Power Relay DC Monostable 4 Form C 4PDT-CO | Electromechanical Relay | Part Number: PT571048 | Internal Number: 9-1419111-4 | TE Connectivity
RoHS : Compliant

100 : $20.73
50 : $21.72
25 : $22.7
10 : $23.68
1 : $24.67

800

2402048-1

TE Connectivity

INLET HSG, CCS1 ASSY, WITH LED Nominal Voltage Architecture: 12 V Number of Positions: 7 Connector & Housing Type: Housing for Male Terminals Mating Pin Diameter: 1.5 mm Mating Pin Diameter: .06 in Automotive Housing | 12 V 7 Housing for Male Terminals 1.5 mm | Part Number: 2402048-1 | Internal Number: 2402048-1 | TE Connectivity
RoHS : Compliant

1 : $143.33

339

404802692035

TE Connectivity

MCU 1K 10% 1PL Resistance Value: 1K Ω Element Type: Cermet Passive Component Tolerance: 10 % Power Rating: 2 W Product Terminates To: Printed Circuit Board Potentiometer | 1K Ω Cermet 10 % 2 W | Part Number: 404802692035 | Internal Number: 2-1625931-8 | TE Connectivity
RoHS : Compliant

100 : $42.48
50 : $44.5
25 : $46.52
10 : $48.55
1 : $50.57

200

T1320480150-000

TE Connectivity

H48B-TG-RO-M50 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320480150-000 | Internal Number: T1320480150-000 | TE Connectivity
RoHS : Compliant

10 : $54.27
1 : $60.31

ABC03N-22P-4048

TE Connectivity

IN-LINE RECP Number of Positions: 10 Connector & Housing Type: Receptacle Mating Alignment: With Mating Alignment Type: Keyed Mating Retention Type: Latching Feature Standard Rectangular Connector | 10 Receptacle With Keyed | Part Number: ABC03N-22P-4048 | Internal Number: ABC03N-22P-4048 | TE Connectivity
RoHS : Compliant

1 : $87.07

T2050482101-007

TE Connectivity

HEEE-048-M Contact Type: Pin Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 48 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Pin Insert for Contacts 48 26 – 12 AWG | Hdc Heee Insert Series & Rail Compliant | Part Number: T2050482101-007 | Internal Number: T2050482101-007 | TE Connectivity
RoHS : Compliant

50 : $32.1
25 : $33.99
10 : $35.88
1 : $37.77

404802692039

TE Connectivity

MCU 22K 10% 1PL Resistance Value: 22K Ω Element Type: Cermet Passive Component Tolerance: 10 % Power Rating: 2 W Product Terminates To: Printed Circuit Board Potentiometer | 22K Ω Cermet 10 % 2 W | Part Number: 404802692039 | Internal Number: 3-1625931-2 | TE Connectivity
RoHS : Compliant

100 : $41.66
50 : $43.64
25 : $45.63
10 : $47.61
1 : $49.6

Venkel Ltd.

CRN10-4-822JT

VENKEL LTD

Chip Resistor Array;CRN10;4;8.2K;�5%;Convex
RoHS : Compliant

10,000

CRN10-4-820JT

VENKEL LTD

Chip Resistor Array;CRN10;4;82R;�5%;Convex
RoHS : Compliant

Vyrian

RP40-4812SFR/N

RECOM Power GmbH

DC-DC Regulated Power Supply Module, 1 Output, 40W, Hybrid
RoHS : Compliant

18,260

JCK3048S3V3

XP Power

DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid
RoHS : Compliant

17,378

VMS-550-48

CUI Inc

AC-DC Regulated Power Supply Module, 1 Output, 550W, Hybrid
RoHS : Compliant

13,512

51762-10404800AALF

Amphenol Communications Solutions

Board Connector, 52 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal, Guide Pin, Receptacle

13,357

AD9048TQ/883B

Analog Devices Inc

ADC, Flash Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, Bipolar, CDIP28
RoHS : Not Compliant

11,874

AD9048SE/833B

Analog Devices Inc

ADC, Flash Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, Bipolar, CQCC28
RoHS : Not Compliant

11,194

AD9048SE

Analog Devices Inc

ADC, Flash Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, Bipolar, CQCC28
RoHS : Not Compliant

9,517

PT5048M

Texas Instruments

Switching Regulator, Voltage-mode, 1.5A, 800kHz Switching Freq-Max, Hybrid, PSIP3
RoHS : Not Compliant

8,929

PIC32MM0128GPM048-I/M4

Microchip Technology Inc

RISC Microcontroller, 32-Bit, FLASH, PIC32 CPU, 25MHz, CMOS, PQCC48
RoHS : Compliant

8,892

PIC32CM2532JH01048-I/Y8X

Microchip Technology Inc

RISC Microcontroller, 32-Bit, FLASH, Cortex-M0+ CPU, 48MHz, CMOS, PQFP48
RoHS : Compliant

8,746

F340X151048MKP2T0

Vishay Intertechnologies

Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 1uF, Through Hole Mount
RoHS : Compliant

7,916

AD8048AN

Analog Devices Inc

Operational Amplifier, 1 Func, PDIP8
RoHS : Not Compliant

5,233

P048F048T24AL

Vicor Power

DC-DC Regulated Power Supply Module, 1 Output, 240W, Hybrid
RoHS : Compliant

2,928

HSTT100-485

Panduit Corp

HEAT SHRINK TUBE, SINGLE WALL, POLYOLEFIN, 25.4 ID Before Shrink, 2:1 Shrink Ratio, BLACK
RoHS : Compliant

846

RACM1200-48SAV/ENC

RECOM Power GmbH

AC-DC Regulated Power Supply Module
RoHS : Compliant

382

Waytek, Inc.

12048074-L

Aptiv PLC

The Aptiv 12048074 is a Metri-Pack 150 Series sealed female terminal designed for reliable automotive electrical connections in harsh environments. Compatible with 1816 Ga. wire (0.51.0 mm), it features a crimp termination with dual crimp zones for both the conductor and seal, ensuring secure electrical contact and environmental protection. Constructed from tin-plated copper alloy, it provides excellent conductivity and corrosion resistance, with a current rating up to ~14A. Designed for use with Metri-Pack 150 connector housings, it includes a locking lance for secure terminal retention and operates reliably from -40C to +125C, making it ideal for automotive, marine, and industrial applications.

100 : $0.14
200 : $0.1319
500 : $0.1249
1,000 : $0.1168
5,000 : $0.1133

38,930

5700125BK0048

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is black adhesive-lined polyolefin tubing with a 1/8" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in cut-length applications.

4 : $3.3359
10 : $2.8819
50 : $2.6055
100 : $2.3983
500 : $2.27

3,776

1410750BK0048

ShawCor Ltd

DSG-Canusa CFW-750 extra heavy-duty heat shrink tubing is black adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications.

1 : $18.39
10 : $15.85
50 : $14.37
100 : $13.17
500 : $12.43

2,494

5700750BK0048

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is black adhesive-lined polyolefin tubing with a 3/4" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in cut-length applications.

1 : $11.28
10 : $9.75
50 : $8.85
100 : $8.08
500 : $7.65

1,968

5700375RD0048

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is red adhesive-lined polyolefin tubing with a .375" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in cut-length applications.

1 : $5.3287
10 : $4.5944
50 : $4.1799
100 : $3.8222
500 : $3.6153

986

4200125CL0048

ShawCor Ltd

DSG-Canusa CPX-100 100 0125 clear polyolefin heat shrink tubing is clear tubing with a .125" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

10 : $1.5362
50 : $1.3271
100 : $1.2044
200 : $1.1044
500 : $1.0408

973

4200375RD0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is red tubing with a 3/8" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

5 : $2.6774
10 : $2.3131
50 : $2.0913
100 : $1.9248
500 : $1.806

507

4200125BK0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a 1/8" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

10 : $1.4925
50 : $1.2893
100 : $1.1702
200 : $1.073
500 : $1.0112

422

4201500BK0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a 1-1/2" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $13.34
10 : $11.52
50 : $10.46
100 : $9.55
500 : $9.04

353

4200750BK0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a 3/4" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

4 : $5.1063
10 : $4.3834
50 : $3.9916
100 : $3.6602
500 : $3.4493

329

4200250RD0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is red tubing with a 1/4" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

10 : $2.1507
50 : $1.858
100 : $1.6862
200 : $1.5462
500 : $1.4571

171

1411100BK0048

ShawCor Ltd

DSG-Canusa CFW-1100 extra heavy-duty heat shrink tubing is black adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications.

1 : $25.62
10 : $22.07
50 : $20.07
100 : $18.33
500 : $17.29

160

5551000RD0048

ShawCor Ltd

DSG-Canusa 5551000RD0048 CPA-300 heat shrink tubing is red adhesive-lined tubing with a 1.000" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

1 : $20.98
10 : $18.06
50 : $16.43
100 : $15.01
500 : $14.15

4202000BK0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a 2" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $18.96
10 : $16.38
50 : $14.87
100 : $13.63
500 : $12.85

5701250BK0048

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is black adhesive-lined polyolefin tubing with a 1-1/4" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in cut-length applications.

1 : $15.91
10 : $13.71
50 : $12.41
100 : $11.37
500 : $10.77

Wuhan P&S

MAL204861221E3

Vishay Intertechnologies

220UF 50V 10X16 105��C 3000H
RoHS : Compliant

1 : $3.9
100 : $1.3
500 : $1.21
1,000 : $1.17

22,500

F339X131048MFP2B0

Vishay Intertechnologies

Interference Suppression Film Capacitor - Class X1 Radial MKP 480 VAC, 10000pF, ��20%
RoHS : Compliant

1 : $0.48
100 : $0.17
500 : $0.13
1,000 : $0.12

10,000

048L-100CWC дистрибьютор

ссылки URL