04041 Price, дистрибьютор, Stock

The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic

Master Electronics

030404105

TE Connectivity

ABB-CONNECTION - CONNECTION-CUSTOM AND ASSEMBLI
RoHS : Compliant

500 : $43.85
250 : $45.0
100 : $45.6
50 : $46.85
25 : $48.86
10 : $51.05
5 : $52.62

R21-61-15.0A-70404-1-V

Sensata Circuit Breakers

Cir Brkr Hyd Mag
RoHS : Compliant

252 : $30.29
102 : $32.56
51 : $33.11
27 : $36.12
12 : $42.06
6 : $43.39
3 : $49.64

2450CM-80040416

Honeywell Sensing and Control

COMMERCIAL THERMOSTAT
RoHS : Compliant

100 : $27.21
75 : $27.77
50 : $35.07
25 : $56.99

104041-0290

Molex

IllumiMate 2.0mm Wire-to-Board Power Connector Housing 2 Circuits Natural
RoHS : Compliant

42,000 : $0.0148
20,000 : $0.016
4,000 : $0.0174

1204041

Phoenix Contact

Assortment box - metal - no components mounted
RoHS : Compliant

5 : $148.04
1 : $155.83

BPDH00040418100M00

Pulse Electronics Corporation

Ferrite SMD Shielded Type
RoHS : Compliant

7,000 : $0.3123
5,250 : $0.3188
3,500 : $0.4026

D25-1-SB-0404-1-C-L50-SB

TE Connectivity

D25-1-SB-0404-1-C-L50-SB MOQ Reduction
RoHS : Compliant

25 : $2,225.79
19 : $2,271.21
13 : $3,251.02
7 : $5,910.5

10104041-20

TE Connectivity

EMITTER 663/905 NM 1 2 MOQ Reduction
RoHS : Compliant

1,000 : $2.63
750 : $2.69
500 : $3.39
250 : $5.51

0804041

Phoenix Contact

Socket - Pin connector pattern type CF - Push-in spring connection - Light indicator - green - for mounting on a DIN rail in the service interface or direct mounting - 250 V AC - 16 A - -20 °C - 60 °C - VDE 0620-1
RoHS : Compliant

5 : $8.4
1 : $8.84

505070-4041

Molex

Board to Board & Mezzanine Connectors .35 B/B Plu
RoHS : Compliant

98,700 : $0.093
31,300 : $0.098
12,100 : $0.101
3,000 : $0.105
600 : $0.109

ASSYRM9M9-0404-100-362-0.9

3M Interconnect

RoHS : Compliant

25 : $105.68
19 : $107.84
13 : $132.72
7 : $200.27

LEJBX66-40404-15-T

Sensata Circuit Breakers

Cir Brkr Hyd Mag
RoHS : Compliant

102 : $65.16
51 : $73.52
21 : $119.73
12 : $120.03
6 : $127.67
3 : $173.27

1320404-1

TE Connectivity

BRACKET STRIPPER
RoHS : Compliant

20 : $143.56
10 : $143.92
5 : $174.53
3 : $234.61
1 : $294.29

542040410

Thomas & Betts

Copper Two-Hole Lug - Standard Barrel - Peep Hole - Wire Size #8 AWG - 1/4 Inch Bolt Size - 5/8 Inch Hole Spacing - Tin Plated - Die Code 21 - Die Color Code Red.
RoHS : Compliant

1,000 : $9.12
500 : $9.24
250 : $9.5
100 : $10.05
50 : $10.35
25 : $10.83
5 : $11.95

542040410SP

Thomas & Betts

8 CU STD BAR 1/4 ON 5/8 SI
RoHS : Compliant

50 : $17.32
38 : $17.68
25 : $19.19
13 : $24.6

Pasternack Enterprises US

PE3C10404-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm. Fire Rated N Male to SMA Male Low Loss Cable Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to SMA male low loss cable using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10404-12 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10404-12 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to SMA plug cable assembly PE3C10404-12 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10404-12 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements.

1 : $105.99
25 : $101.75
50 : $98.57
100 : $96.45

PE3M0404-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. MIL Size 12 Contact Socket to MIL Size 12 Contact Socket Cable 12 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0404-12 from Pasternack is a D38999 contact cable assembly that is built with a size 12 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0404-12 in-series RF cable has 0.78 inches of repeated minimum bend radius. M39029 socket to M39029 socket cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0404-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements.

1 : $104.99
10 : $100.79
25 : $96.59
100 : $92.39

PE3MSA00404-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Halogen Free Bend Relief 3-Lug TRB Non-Insulated Bulkhead Jack with Blunt Cut for 78 Ohm TWCH-78-2, 12" Cable., Radio frequency assembly halogen free bend relief 3-Lug TRB non-insulated bulkhead jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Halogen free bend relief 3-Lug TRB non-insulated bulkhead jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00404-12 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00404-12 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00404-12 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this halogen free bend relief 3-Lug TRB non-insulated bulkhead jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable.

1 : $158.99
25 : $151.04
50 : $143.09
100 : $136.73

PE3W04041LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. 10-32 Female Bulkhead to D-Sub Plug Right Angle Cable Using RG196 Coax with HeatShrink, LF Solder. PE3W04041LF/HS is a 10-32 female bulkhead to D-Sub plug right angle cable using RG196 coax. This Pasternack 10-32 female bulkhead to D-Sub plug right angle cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm D-Sub for connector 2. 10-32 to D-Sub right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female 10-32 bulkhead to plug D-Sub right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04041LF/HS 10-32 female bulkhead to D-Sub plug right angle cable assembly is constructed with RG196 coax.

Vyrian

SN1104041RGER

Texas Instruments

9,083

04041 дистрибьютор

ссылки URL