0400ECNDMNFZCWC Price, дистрибьютор, Stock

1 : $307.667
5 : $307.667
10 : $271.471
25 : $256.389
50 : $256.389
100 : $247.232
250 : $238.707
500 : $238.707
1,000 : $230.75
2,500 : $230.75
10,000 : $223.306

804-004-00M7-1P

Glenair Inc

Connector
RoHS : Compliant

804-004-00ZNU7-1P

Glenair Inc

Connector
RoHS : Not Compliant

804-004-00M7-1S

Glenair Inc

Connector
RoHS : Compliant

804-004-00C7-10SA

Glenair Inc

Connector
RoHS : Compliant

1 : $891.018
5 : $830.61
10 : $742.515
25 : $731.433
50 : $731.433
100 : $720.676
250 : $700.086
500 : $680.639
1,000 : $671.315
2,500 : $671.315
10,000 : $671.315

804-004-00C9-19PA

Glenair Inc

Connector
RoHS : Compliant

1 : $1,119.964
5 : $1,044.034
10 : $933.303
25 : $919.373
50 : $919.373
100 : $905.853
250 : $879.971
500 : $855.528
1,000 : $843.808
2,500 : $843.808
10,000 : $843.808

804-004-00M10-26P

Glenair Inc

Connector
RoHS : Compliant

1 : $1,291.964
5 : $1,204.373
10 : $1,076.636
25 : $1,060.567
50 : $1,060.567
100 : $1,044.971
250 : $1,015.114
500 : $986.917
1,000 : $973.397
2,500 : $973.397
10,000 : $973.397

804-004-00M10-26S

Glenair Inc

Connector
RoHS : Compliant

1 : $1,424.473
5 : $1,327.898
10 : $1,187.061
25 : $1,169.343
50 : $1,169.343
100 : $1,152.147
250 : $1,119.229
500 : $1,088.139
1,000 : $1,073.233
2,500 : $1,073.233
10,000 : $1,073.233

804-004-00M15-85P

Glenair Inc

Connector
RoHS : Compliant

1 : $2,544.182
5 : $2,371.695
10 : $2,120.152
25 : $2,088.507
50 : $2,088.507
100 : $2,057.794
250 : $1,999.0
500 : $1,943.472
1,000 : $1,916.849
2,500 : $1,916.849
10,000 : $1,916.849

804-004-00M15-85S

Glenair Inc

Connector
RoHS : Compliant

1 : $3,041.509
5 : $2,835.305
10 : $2,534.591
25 : $2,496.761
50 : $2,496.761
100 : $2,460.044
250 : $2,389.757
500 : $2,323.375
1,000 : $2,291.548
2,500 : $2,291.548
10,000 : $2,291.548

804-004-00M5-3P

Glenair Inc

Connector
RoHS : Compliant

1 : $628.127
5 : $585.542
10 : $523.439
25 : $515.627
50 : $515.627
100 : $508.044
250 : $493.529
500 : $479.819
1,000 : $473.247
2,500 : $473.247
10,000 : $473.247

804-004-00M5-3S

Glenair Inc

Connector
RoHS : Compliant

1 : $618.309
5 : $576.39
10 : $515.258
25 : $507.567
50 : $507.567
100 : $500.103
250 : $485.814
500 : $472.319
1,000 : $465.849
2,500 : $465.849
10,000 : $465.849

804-004-00M6-1P

Glenair Inc

Connector
RoHS : Compliant

1 : $643.818
5 : $600.169
10 : $536.515
25 : $528.507
50 : $528.507
100 : $520.735
250 : $505.857
500 : $491.806
1,000 : $485.068
2,500 : $485.068
10,000 : $485.068

804-004-00M7-10P

Glenair Inc

Connector
RoHS : Compliant

1 : $858.109
5 : $799.932
10 : $715.091
25 : $704.418
50 : $704.418
100 : $694.059
250 : $674.229
500 : $655.5
1,000 : $646.521
2,500 : $646.521
10,000 : $646.521

804-004-00M7-10S

Glenair Inc

Connector
RoHS : Compliant

1 : $891.018
5 : $830.61
10 : $742.515
25 : $731.433
50 : $731.433
100 : $720.676
250 : $700.086
500 : $680.639
1,000 : $671.315
2,500 : $671.315
10,000 : $671.315

Flip Electronics

HCPL-4504-000E

Broadcom Limited

Stock, Ship Today
RoHS : Compliant

1 : $0.56

3,200

IDT8V33004-001NLGI

Integrated Device Technology Inc

Stock

612

ICS8V33004-001NLGI

Integrated Device Technology Inc

Stock

612

8V33004-001NLGI

Integrated Device Technology Inc

Stock, Ship Today

1 : $6.62

612

ESSV020W-0400-42

Energy Recovery Products

Stock, Ship Today

1 : $5.21

CDB260W-0860-400-R

Energy Recovery Products

Stock, Ship Today

CDB260W-0860-400-W

Energy Recovery Products

Stock, Ship Today

Maritex

JC1E106M04005VR

Samwha Electric Co Ltd

Electrolytic capacitor; SMD; 10uF; 25V; 20%; 105deg.C; 4x5.3; 2000h

6,000 : $0.063
2,000 : $0.066
500 : $0.069
100 : $0.075
25 : $0.09
1 : $0.096

40,000

SC1E106M04005VR

Samwha Electric Co Ltd

Electrolytic capacitor; SMD; 10uF; 25V; 20%; 85deg.C; 4.0x5.3; 2000h

3,000 : $0.029
1,000 : $0.035
500 : $0.036
1 : $0.038

20,000

B72520T0400K062

TDK Corporation

Varistors; B72520T0400K062; TDK; 250 pF; 110 V; Surface Mount; 1 A
RoHS : Compliant

4,000 : $0.067
2,000 : $0.073
500 : $0.085
150 : $0.099
50 : $0.122
5 : $0.163
1 : $0.509

19,654

PC33V67 V0 4000K 3-STEP

Lextar Electronics Corporation

LED; SMD PLCC2 3030; Lextar PC33V67 V0; Solar White; neutral white 4000K (3-stepmAc Adams elipse-Single Bin); ET:EU 100-120lm/150mA; typ. 6.2 V; CRI min 95; R9 typ. 90; 120 degrees; yellow diffused lens; 3.0x3.2x0.67mm /3000

3,000 : $0.013
1,000 : $0.014
100 : $0.015
1 : $0.018

2,600

368040001

Molex

Connectors Accessories; 368040001; MOLEX; Yes
RoHS : Compliant

20,000 : $0.019
10,000 : $0.021
100 : $0.024
30 : $0.027
10 : $0.036
1 : $0.0469

2,063

PC30V21 V0 4000K TD:TE 1:5 3-STEP

Lextar Electronics Corporation

LED PC30V21 V0; SMD; PLCC2 3014; neutral white 4000K; 3-step; TD:TE 22-26lm/65mA; 2.8-3.4V; CRI typ 97; R9 typ. 94; R13 typ. 99; 120 deg; yellow diffused; 3.0x1.4x0.65mm

2,000 : $0.017
1,000 : $0.018
100 : $0.019
1 : $0.023

940

2040008-1

TE Connectivity

Terminal Blocks; 2040008-1; TE CONNECTIVITY; Black; Bulk; Straight; Cable
RoHS : Compliant

100 : $6.191
10 : $7.653
1 : $9.8698

742

418-80400 SHAFT COVER ORANGE ROHS

ECE

Knob; for ERD2; orange

1,000 : $0.155
500 : $0.168
250 : $0.176
50 : $0.181
1 : $0.204

500

CK1V106M04005VR

Samwha Electric Co Ltd

Electrolytic capacitor; SMD; 10uF; 35V; 20%; 105deg.C; 4x5.3; 2000h

1 : $0.066

275

2004-1211/1000-400

WAGO Innovative Connections

DIN Rail Terminal Blocks; 2004-1211/1000-400; WAGO; Grey
RoHS : Compliant

150 : $5.475
50 : $7.241
1 : $22.6287

40.61.8.230.4000

FINDER SpA

Electromagnetic relay; contact rating current 16A; coil voltage 230VAC; changeover contact (1C); coil power: 1.2VA; 16A/24VDC; 16A/250VAC

100 : $6.907
50 : $7.101
25 : $7.36
1 : $7.8902

40.52.8.230.4000

FINDER SpA

Electromagnetic relay; contact rating current 8A; coil voltage 230VAC; 2 changeover contact (2C); coil power 1.2VA; 8A/250VAC,8A/24VDC; mounting: PCB, socket

100 : $7.388
20 : $8.153
1 : $8.6622

AS3813-E-0400-120-S

Ansen Quartz Co Ltd

Transformer; 1.8VA; 230VAC; 6V; 300mA; PCB

404000E02M100

Molex

Round Cables; 404000E02M100; MOLEX
RoHS : Compliant

1 : $38.1239

190040001

Molex

Quick Connect, Disconnect Terminals; 190040001; MOLEX; Brass, Copper; Insulated; 6.35 mm
RoHS : Compliant

1,000 : $0.211
500 : $0.229
100 : $0.275
30 : $0.334
10 : $0.395
1 : $0.5223

Neutron USA

ATS-CPX040040020-115-C2-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Blue, Square Fin, 40mm L, 40mm W, 20mm H, 5.33C/W at 100LFM
RoHS : Compliant

1 : $34.99

ATS-CPX040040015-154-C2-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Coarse-Pitch, Straight, Left-Tab, T766, 40x40x15mm, 7.51C/W
RoHS : Compliant

1 : $39.99

120400400

Norgren

Norgren 120400400 Fitting, nkl pl, UNION, ELBOW, 1/4"

1 : $34.99

ATS-CPX040040010-113-C2-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Coarse-Pitch, X-Cut, 4-Hole, T766, 40x40x10mm, 11.79C/W
RoHS : Compliant

1 : $257.75

ATS-CPX040040035-186-C3-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Coarse-Pitch, Straight, Right-Tab, T412, 40x40x35mm, 2.90C/W
RoHS : Compliant

1 : $39.99

ATS-FPX040040020-04-C1-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Fine-Pitch, X-Cut, 4-Corner Hole, 40x40x20mm, 11.55C/W
RoHS : Compliant

1 : $29.99

ATS-CPX040040025-156-C2-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Coarse-Pitch, Straight, Left-Tab, T766, 40x40x25mm, 4.14C/W
RoHS : Compliant

1 : $34.99

ATS-CPX040040015-114-C2-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Blue, Square Fin, 40mm L, 40mm W, 15mm H, 7.41C/W at 100LFM
RoHS : Compliant

1 : $29.99

ATS-FPX040040035-66-C2-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Fine-Pitch, Straight, Left-Tab, T766, 40x40x35mm, 5.77C/W
RoHS : Compliant

1 : $39.99

ATS040040006-PF-13E

Advanced Thermal Solutions Inc

Heat Sinks BGA Heat Sink, Pin Fin, No TIM, Black Anodized
RoHS : Compliant

1 : $49.99

1.04.0076.04000

Hms Industrial Networks AB

Specialized Cables Ixxat M12-to-SUB D9 converter cable

1 : $124.99

ATS-CPX040040025-116-C1-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Coarse-Pitch, X-Cut, 4-Corner Hole, 40x40x25mm, 4.11C/W
RoHS : Compliant

1 : $29.99

ATS-CPX040040025-116-C2-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Coarse-Pitch, X-Cut, 4-Corner Hole, T766, 40x40x25mm, 4.14C/W
RoHS : Compliant

1 : $29.99

05004004001

Wera Werk Hermann Werner GmbH & Co. KG

Wera Tools 05004004001 Zyklop Series Metal Ratchet 1/4 Full Metal Ratchet with Switch LEVER

1 : $144.99

ATS-CPX040040012-195-C2-R0

Advanced Thermal Solutions Inc

Heat Sinks pushPIN Heat Sink, Coarse-Pitch, X-Cut, Hole: 4-Corner, Blue Anodized, T766
RoHS : Compliant

1 : $29.99

Pasternack Enterprises US

PE3C10400

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm. Fire Rated N Male Right Angle to N Female Bulkhead Low Loss Cable Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male right angle to N female bulkhead low loss cable using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N female bulkhead low loss cable using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss right angle a type N to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10400 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10400 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to type N jack cable assembly PE3C10400 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10400 can also be used in the other direction and will be type N female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

144

PE3C10400-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male Right Angle to N Female Bulkhead Low Loss Cable 48 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male right angle to N female bulkhead low loss cable 48 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N female bulkhead low loss cable 48 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss right angle a type N to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10400-48 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10400-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to type N jack cable assembly PE3C10400-48 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10400-48 can also be used in the other direction and will be type N female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $164.99
25 : $158.39
50 : $153.44
100 : $150.14

PE3M0400-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMZ, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 Contact Socket to BMZ Size 8 Contact Socket Cable 36 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0400-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ socket contact connection on one end and a BMZ socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to BMZ cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0400-36 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ socket to BMZ socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0400-36 in-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMZ socket to BMZ socket cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0400-36 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to BMZ RF cable are available on our downloadable PDF datasheet. BMZ socket to BMZ socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to BMZ RF cable assembly as per your requirements.

1 : $423.99
10 : $407.03
25 : $390.07
100 : $373.11

PE3M0400-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMZ, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 Contact Socket to BMZ Size 8 Contact Socket Cable 6 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0400-6 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ socket contact connection on one end and a BMZ socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to BMZ cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0400-6 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ socket to BMZ socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0400-6 in-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMZ socket to BMZ socket cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0400-6 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to BMZ RF cable are available on our downloadable PDF datasheet. BMZ socket to BMZ socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to BMZ RF cable assembly as per your requirements.

1 : $408.99
10 : $392.63
25 : $376.27
100 : $359.91

PE7704-00

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 0 dB, VSWR, Max: 1.4:1, Input Power, Max (CW): 1 Watts, Body Material: Copper, Connector-In Series: 2.92mm, Connector-In Gender: Female, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -269.15 deg C. 0 dB Fixed Attenuator Bulkhead for Cryogenic Application, 2.92mm Female to 2.92mm Female Copper Gold Plated Body Rated to 1 W, DC to 40 GHz. PE7704-00 is a 0 dB fixed attenuator from Pasternack that is designed for cryogenic applications. This attenuator is an in-line, resistive PI attenuator pad design. This RF attenuator comes with a maximum attenuation accuracy of 0.75 dB. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.4:1 and operates between 4 kelvin and 125 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with copper body material and gold plating. The bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a female gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7704-00 attenuator is rated for up to 40 GHz. This fixed coaxial attenuator is suitable for quantum computing, precision measurements, instrumentation and prototyping and characterization applications. Our attenuator can work and maintain excellent RF performance at the low temperature of 4 kelvin. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7704-00 will ship the same business day as purchased from Pasternack’s production facility. This attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $765.99
10 : $750.67
25 : $735.35
100 : $720.03

PE3MSA00400-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Halogen Free 3-Lug TRB Jack with Blunt Cut for 78 Ohm TWCH-78-2, 12" Cable., Radio frequency assembly halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00400-12 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00400-12 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00400-12 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable.

1 : $154.99
25 : $147.24
50 : $139.49
100 : $133.29

PE3W04006

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Female to SMA Male Cable Using RG316 Coax. PE3W04006 is a BNC female to SMA male cable using RG316 coax. This Pasternack BNC female to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our female BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04006 BNC female to SMA male cable assembly is constructed with RG316 coax.

PE3W04005

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG141 Coax. PE3W04005 is a SMA male to SMA male cable using RG141 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04005 SMA male to SMA male cable assembly is constructed with RG141 coax.

PE3W04008

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using LMR-195 Coax. PE3W04008 is a N male to SMA male cable using LMR-195 coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04008 N male to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3MSA00400

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm. Halogen Free 3-Lug TRB Jack with Blunt Cut for 78 Ohm TWCH-78-2 Cable., Radio frequency assembly halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00400 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00400 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00400 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this halogen free 3-Lug TRB jack with blunt cut for 78 Ohm TWCH-78-2 cable.

PE3W04004

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to Mini SMP Female Cable Using PE-SR405FL Coax. PE3W04004 is a SMP male bulkhead to Mini SMP female cable using PE-SR405FL coax. This Pasternack SMP male bulkhead to Mini SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm Mini SMP for connector 2. Our male SMP bulkhead to female Mini SMP cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W04004 SMP male bulkhead to Mini SMP female cable assembly is constructed with PE-SR405FL coax.

PE3W04002

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Male Cable Using LMR-195 Coax. PE3W04002 is a TNC male right angle to SMA male cable using LMR-195 coax. This Pasternack TNC male right angle to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04002 TNC male right angle to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20400/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: D-Subminiature, Connector 1 Gender: Receptacle, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to MCX Plug Cable Using RG316 Coax with HeatShrink., Pasternack’s PE3W20400/HS D-Subminiature receptacle to MCX plug RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The D-Subminiature receptacle to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom D-Subminiature to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a D-Subminiature cable connection on one end and a MCX cable connection on the other. Our D-Subminiature to MCX cable assembly has a receptacle gender on end 1 and a plug on end 2. PE3W20400/HS can also be known as a D-Subminiature receptacle to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20400/HS RF cable has an FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W20400/HS D-Subminiature receptacle to MCX male cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible D-Subminiature cable assembly is manufactured with D-Subminiature to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W20400/HS can also be used in the other direction and will be a MCX plug to D-Subminiature receptacle cable assembly if the opposite connectivity is required. This D-Subminiature receptacle to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality D-Subminiature to MCX cable assembly for quick shipment worldwide. Variations of D-Subminiature and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal D-Subminiature to MCX RF cable assembly as per your requirements.

PE3W04004LF

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Mini SMP Female to Limited Detent SMP Male Bulkhead Cable Using PE-SR405FL Coax, LF Solder. PE3W04004LF is a Mini SMP female to SMP male bulkhead cable using PE-SR405FL coax. This Pasternack Mini SMP female to SMP male bulkhead cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMP for connector 2. Our female Mini SMP to male SMP bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W04004LF Mini SMP female to SMP male bulkhead cable assembly is constructed with PE-SR405FL coax.

PE3W04003

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to Limited Detent SMP Male Bulkhead Cable Using RG405 Coax. PE3W04003 is a SMP female right angle to SMP male bulkhead cable using RG405 coax. This Pasternack SMP female right angle to SMP male bulkhead cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. SMP right angle to SMP coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to male SMP bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04003 SMP female right angle to SMP male bulkhead cable assembly is constructed with RG405 coax.