 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
0189.19-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
 ComSIT USA | LM2586SX50E7001891 | National Semiconductor Corporation | SIMPLE SWITCHER 3 AMP FLYBACK REGULATOR WITH SHUTDOWN Switching Regulator, Current-mode, 7A, 200kHz Switching Freq-Max, BIPolar, PSSO7 RoHS : Compliant | 11,325 | ||
| 246411067101894E | KYOCERA Corporation | Card Edge Connector, 67 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal RoHS : Compliant | 1,000 | |||
| SHF0189 | RF Micro Devices Inc | 0.05 GHZ TO 6 GHZ, 0.5 WATT GAAS HFET RF Small Signal Field-Effect Transistor, 1-Element, C Band, Gallium Arsenide, N-Channel, Hetero-junction FET RoHS : Not Compliant | 660 | |||
 Powell Electronics | BATTU-20.1/8.9-A1-2-64MM | TE Connectivity | Connectors RoHS : Compliant |
| 14,520 | |
| BZ-7RW80189-A2 | Honeywell Sensing and Control | Switch RoHS : Compliant |
| 1,517 | ||
| 10-189009-083 | Amphenol Corporation | NUT |
| 148 | ||
| 10-189000-203 | Amphenol Corporation | PIN CONTACT |
| 130 | ||
| 10-189010-125 | Amphenol Corporation | CLAMP |
| 10 | ||
| 10-189010-145 | Amphenol Corporation | CLAMP |
| 8 | ||
| 10-189010-08Y | Amphenol Corporation | CLAMP |
| 5 | ||
| 10-189231-14 | Amphenol Corporation | CAP |
| 4 | ||
| 1490189-5 | TE Connectivity | CRIMPER, WIRE RoHS : Compliant |
| 4 | ||
| 87-436018-98P | Amphenol Corporation | RECEPT |
| 4 | ||
| 91-436018-98P | Amphenol Corporation | RECEPT |
| 3 | ||
| 1490189-6 | TE Connectivity | CRIMPER, WIRE RoHS : Compliant |
| 2 | ||
| 10-189009-203 | Amphenol Corporation | NUT |
| 1 | ||
| 10-189010-225 | Amphenol Corporation | CLAMP |
| 1 | ||
| 10-189009-125 | Amphenol Corporation | NUT |
| 1 | ||
 PUI | 12.60189 | 5,370 | ||||
 Rutronik | 150-80-328-01-899161 | PRECI-DIP SSA | 28P DIP Pinheader-Typ 2.54mm RoHS : Compliant |
| 518 | |
 Chip 1 Exchange | 150-1030801899191 | INSTOCK | 32,400 | |||
| 12.60189 | Geyer Electronic E K | INSTOCK | 5,370 | |||
| AN12CE0189CBB | LSI Corporation | INSTOCK | 3,000 | |||
| 3001896 | INSTOCK | 1,000 | ||||
| MAL203690189E3 | Vishay Intertechnologies | INSTOCK | 1,000 | |||
| 4380189 | INSTOCK | 716 | ||||
| CCDC1091601898 | YAGEO Corporation | INSTOCK | 670 | |||
| 08-50-0189 | Molex | INSTOCK RoHS : Compliant | 463 | |||
| 11018978A | INSTOCK | 428 | ||||
| 11018985A | INSTOCK | 276 | ||||
| GXB10189DG | INSTOCK | 188 | ||||
| 800-18939-0001 | INSTOCK | 26 | ||||
| MC10189L | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 15 | |||
| MC10189L | INSTOCK | 10 | ||||
| ECS-250-18-9X | ECS International Inc | INSTOCK RoHS : Compliant | 8 | |||
 Avnet Silica | FL1600189Q | Diodes Incorporated | Crystal 16MHz 8pF 4Pin CSMD TR (Alt: FL1600189Q) RoHS : Compliant | 0 | ||
| FL2400189Q | Diodes Incorporated | (Alt: FL2400189Q) RoHS : Compliant | 0 | |||
| RCLAMP01892PWQC | Semtech Corporation | ESD Suppressor TVS Array 8kV 3Pin DFN (Alt: RCLAMP01892PWQC) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | 70001899 | Digi International Inc | Digi PortServer TS M MEI 3 port RS-232/422/485 RJ-45 Serial to Ethernet Device Server with Modem, 9-30VDC includes 12V/.5A Wall Mount power supply with international plug kit |
| 0 | |
 DB Roberts | 0189 | Heyco | HAT875 W/0T67 & 0T68 | 0 | ||
| M4-20-189-20 | Southco | 0 | ||||
| BNC0189B | Essentra Components | BOLT AND NUT PROTECT CAPLDPE W | 0 | |||
| V-180-18-90 | Shercon Inc | 250 PER BOX | 0 | |||
| 100189 | Pop Rivets | TAPD68BSLF11 001 B5K | 0 | |||
| 110189 | Essentra Components | 0 | ||||
| K2-3001-89 | Southco | High working loads convenient mechanical advantage and compact size are common advantages that make these Southco rotary draw latches a good choice for co-planar applications where space and strength are important functional considerations. RoHS : Compliant | 0 | |||
| 07003-00189 | Avdel | 0 | ||||
| 65110-00189 | Avdel | GEAR CASE | 0 | |||
| 10189 | Essentra Components | 0 | ||||
| 783PP-00189 | Avdel | SPIRALOCK NUT M8X1.25 HEXAGONA | 0 | |||
| BNC0189A | Essentra Components | BOLT AND NUT PROTECT CAPLDPE B | 0 | |||
| 460189 | Essentra Components | 0 | ||||
| 13RSSR0189B | Essentra Components | ROUND SPACER, .192 ID, .625 OD | 0 | |||
| 13RSSR0189 | Essentra Components | ROUND SPACER, .192 ID, .625 OD | 0 | |||
 EBV Elektronik | CDM-9-3018-90-36-DW01 | Luminus Devices | (Alt: CDM-9-3018-90-36-DW01) RoHS : Compliant | 400 | ||
| MP-1616-1100-18-90 | Luminus Devices | (Alt: MP-1616-1100-18-90) RoHS : Compliant | 0 | |||
| CDM-6-3018-90-18-DW01 | Luminus Devices | (Alt: CDM-6-3018-90-18-DW01) RoHS : Compliant | 0 | |||
| CDM-6-3018-90-18-DW02 | Luminus Devices | Warm Dimming Chip On Board LED Spot Module White 438lm 90CRI 300mA Tray (Alt: CDM-6-3018-90-18-DW02) RoHS : Compliant | 0 | |||
| CTM-9-4018-90-36-TW01 | Luminus Devices | COB LED Spot Module 12 LEDs Screw Mount Tray (Alt: CTM-9-4018-90-36-TW01) RoHS : Compliant | 0 | |||
| CDM-9-3018-90-36-DW02 | Luminus Devices | (Alt: CDM-9-3018-90-36-DW02) RoHS : Compliant | 0 | |||
| CTM-14-4018-90-36-TW01 | Luminus Devices | COB LED Spot Module 24 LEDs Screw Mount Tray (Alt: CTM-14-4018-90-36-TW01) RoHS : Compliant | 0 | |||
| CTM-18-4018-90-36-TW01 | Luminus Devices | COB LED Spot Module 36 LEDs Screw Mount Tray (Alt: CTM-18-4018-90-36-TW01) RoHS : Compliant | 0 | |||
| CTM-22-4018-90-36-TW01 | Luminus Devices | COB LED Spot Module 60 LEDs Screw Mount Tray (Alt: CTM-22-4018-90-36-TW01) RoHS : Compliant | 0 | |||
| CDM-18-3018-90-36-DW02 | Luminus Devices | (Alt: CDM-18-3018-90-36-DW02) RoHS : Compliant | 0 | |||
| CDM-18-3018-90-36-DW01 | Luminus Devices | (Alt: CDM-18-3018-90-36-DW01) RoHS : Compliant | 0 | |||
| CDM-14-3018-90-36-DW01 | Luminus Devices | (Alt: CDM-14-3018-90-36-DW01) RoHS : Compliant | 0 | |||
| CTM-9-4018-90-36-TWD6-F3-3 | Luminus Devices | (Alt: CTM-9-4018-90-36-TWD6-F3-3) RoHS : Compliant | 0 | |||
| CTM-18-4018-90-36-TWD6-F3-3 | Luminus Devices | (Alt: CTM-18-4018-90-36-TWD6-F3-3) RoHS : Compliant | 0 | |||
| CTM-14-4018-90-36-TWD6-F3-3 | Luminus Devices | LED COB Warm WhiteCool White 18004000K 900mA Tray (Alt: CTM-14-4018-90-36-TWD6-F3-3) RoHS : Compliant | 0 | |||
 Maritex | 1410189-3 | TE Connectivity | Custom Backplane Connectors; 1410189-3; TE CONNECTIVITY; 7; 56; Right Angle; 1 A RoHS : Not Compliant |
| 122 | |
| C10-730189-211 | Amphenol Corporation | Specialty Terminals; C10-730189-211; AMPHENOL |
| 22 | ||
 Pasternack Enterprises US | PE3W00189LF-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 59.0551 inches. HN Male to HN Male Cable Using RG393 Coax, LF Solder in 150CM., Radio frequency assembly HN male to HN male cable using RG393 coax, LF solder in 150CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male cable using RG393 coax, LF solder in 150CM, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our HN to HN cable assemblies have a male gender on end 1 and male on end 2. This HN to HN cable is a male to male coax assembly, PE3W00189LF-150CM, can also be known as a HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3W00189LF-150CM is built with RG393 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male cable using RG393 coax, LF solder in 150CM. |
| 0 | |
| PE3W01897LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Cable Using RG174 Coax, RoHS. PE3W01897LF is a SMA male to BNC male cable using RG174 coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01897LF SMA male to BNC male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W01897LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using RG174 Coax with HeatShrink, LF Solder. PE3W01897LF/HS is a BNC male to SMA male cable using RG174 coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01897LF/HS BNC male to SMA male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W00189 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. HN Male to HN Male Cable Using RG393 Coax., Radio frequency assembly HN male to HN male cable using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male cable using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our HN to HN cable assemblies have a male gender on end 1 and male on end 2. PE3W00189 can also be known as a HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3W00189 is built with RG393 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male cable using RG393 coax. | 0 | |||
| PE3W01890/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Male to UHF Male Cable Using RG223 Coax with HeatShrink. PE3W01890/HS is a N male to UHF male cable using RG223 coax. This Pasternack N male to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our male N to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01890/HS N male to UHF male cable assembly is constructed with RG223 coax. | 0 | |||
| PE3W01892 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Cable Using RG174 Coax. PE3W01892 is a SMA male to MCX plug cable using RG174 coax. This Pasternack SMA male to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our male SMA to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01892 SMA male to MCX plug cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W01898 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Female Bulkhead Cable Using Tinned RG405 Coax. PE3W01898 is a SMA female bulkhead to SMA female bulkhead cable using RG405 Tinned coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01898 SMA female bulkhead to SMA female bulkhead cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3C0189/HS2 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female to TNC Male Cable Using PE-C200 Coax with Double HeatShrink., Radio frequency assembly reverse polarity TNC female to TNC male cable using PE-C200 coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC female to TNC male cable using PE-C200 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC cable connection on one end and TNC cable connection on the other. Our reverse polarity TNC to TNC cable assemblies have a female gender on end 1 and male on end 2. This reverse polarity TNC to TNC cable is a female to male coax assembly, PE3C0189/HS2, can also be known as a reverse polarity TNC jack to TNC plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC jack to TNC plug cable assembly PE3C0189/HS2 is built with PE-C200 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency reverse polarity TNC female to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0189/HS2 can also be used in the other direction and will be TNC male to reverse polarity TNC female cable assembly if the opposite connectivity is required. TNC reverse polarity jack to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC female to TNC male cable using PE-C200 coax with double heatshrink. | 0 | |||
| PE3W01899 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Female Bulkhead Cable Using Tinned RG405 Coax. PE3W01899 is a SMA female bulkhead to SMA female bulkhead cable using RG405 Tinned coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01899 SMA female bulkhead to SMA female bulkhead cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W00189LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. HN Male to HN Male Cable Using RG393 Coax, LF Solder in 100CM., Radio frequency assembly HN male to HN male cable using RG393 coax, LF solder in 100CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male cable using RG393 coax, LF solder in 100CM, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our HN to HN cable assemblies have a male gender on end 1 and male on end 2. This HN to HN cable is a male to male coax assembly, PE3W00189LF-100CM, can also be known as a HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3W00189LF-100CM is built with RG393 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male cable using RG393 coax, LF solder in 100CM. |
| 0 | ||
| PE3W00189-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. HN Male to HN Male Cable 24 Inch Length Using RG393 Coax., Radio frequency assembly HN male to HN male cable 24 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male cable 24 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our HN to HN cable assemblies have a male gender on end 1 and male on end 2. PE3W00189-24 can also be known as a HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3W00189-24 is built with RG393 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male cable 24 inch length using RG393 coax. |
| 0 | ||
| PE3W01893/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. 1.0/2.3 Jack Bulkhead to 1.0/2.3 Jack Bulkhead Cable Using RG174 Coax with HeatShrink. PE3W01893/HS is a 1.0/2.3 jack bulkhead to 1.0/2.3 jack bulkhead cable using RG174 coax. This Pasternack 1.0/2.3 jack bulkhead to 1.0/2.3 jack bulkhead cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our jack 1.0/2.3 bulkhead to jack 1.0/2.3 bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01893/HS 1.0/2.3 jack bulkhead to 1.0/2.3 jack bulkhead cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W00189LF-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. HN Male to HN Male Cable Using RG393 Coax, LF Solder in 48 Inch., Radio frequency assembly HN male to HN male cable using RG393 coax, LF solder in 48 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male cable using RG393 coax, LF solder in 48 inch, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our HN to HN cable assemblies have a male gender on end 1 and male on end 2. This HN to HN cable is a male to male coax assembly, PE3W00189LF-48, can also be known as a HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3W00189LF-48 is built with RG393 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male cable using RG393 coax, LF solder in 48 inch. |
| 0 | ||
| PE3W00189-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. HN Male to HN Male Cable 12 Inch Length Using RG393 Coax., Radio frequency assembly HN male to HN male cable 12 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male cable 12 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our HN to HN cable assemblies have a male gender on end 1 and male on end 2. PE3W00189-12 can also be known as a HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE3W00189-12 is built with RG393 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male cable 12 inch length using RG393 coax. |
| 0 | ||
| PE3W01890 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Male to UHF Male Cable Using RG223 Coax. PE3W01890 is a N male to UHF male cable using RG223 coax. This Pasternack N male to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our male N to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01890 N male to UHF male cable assembly is constructed with RG223 coax. | 0 | |||
 TE Connectivity | 350189-1 | TE Connectivity | .058 DIA RECPT PC R/A LP 26-22 PCB Terminal Type: Receptacle Mating Pin Diameter: .058 in Mating Pin Diameter: 1.47 mm Compatible Insulation Diameter (Max): 1.65 mm Compatible Insulation Diameter (Max): .065 in Receptacle .058" 1.47 mm 1.65 mm | PCB Terminal | Part Number: 350189-1 | Internal Number: 350189-1 | .058" | TE Connectivity RoHS : Compliant |
| 11,650 | |
| 1410189-3 | TE Connectivity | MULTIGIG RT T2 7RW H-LFT,ET2 Number of Positions: 56 Row-to-Row Spacing: 1.35 mm Row-to-Row Spacing: .053 in Mating Alignment: With Mating Alignment Type: Polarization High Speed Backplane Connector | 56 1.35 mm .053" With | Part Number: 1410189-3 | Internal Number: 1410189-3 | TE Connectivity RoHS : Compliant |
| 2,043 | ||
 Win Source Electronics | SHF-0189Z | RF Micro Devices Inc | .5 - 6 GHz, .5 Watt GaAs HFET RoHS : Compliant |
| 5,610 | |
| 1410189-3 | TE Connectivity | CONN PLUG VITA46 56POS EDGE MNT RoHS : Not Compliant |
| 700 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼ 
English
Chinese
German
Japanese
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand