| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow |
 Braemac Americas-Symmetry | SDP810-125PA-D
| Sensirion | Digital Differential Pressure Sensor with Tube connection | | 1
 |
TMJY0012DGDZ5NL
| Taoglas Antenna Solutions | RJ45 ICM, 10G Base-T, 1x1, Low profile, Tab Down, Long body, 12 pin THT, 3Wire+T, Shielded EMI Finger, LED, Industrial grade | | 0
 |
33-2012-07
| Calian | | | 0
 |
4012-LCDK1W-915
| Silicon Laboratories Inc | Sub-GHz Development Tools Si4012 Demo Kit with LCD Display and Si4355 Receiver (915MHz) | | 0
 |
MUZP-120-12-JB0-K
| Nipron Co | 120W 12V medical power supply | | 0
 |
SDP800-125PA
| Sensirion | Digital Differential Pressure Sensor, manifold mount RoHS : Compliant | | 0
 |
ASPI-3012S-2R2N-T
 | Abracon Corporation | RoHS : Compliant | | 0
 |
AMCA31-101-2R450G-S1F
| Abracon Corporation | | | 0
 |
AMELA5012S-R68MT
| Abracon Corporation | RoHS : Compliant | | 0
 |
AMER90C-70120Z-P
| Aimtec | RoHS : Compliant | | 0
 |
AMPLA4012S-R22MT
 | Abracon Corporation | RoHS : Compliant | | 0
 |
AIAP-01-222K-T
 | Abracon Corporation | RoHS : Compliant | | 0
 |
AISC-1008-R012G-T
| Abracon Corporation | RoHS : Compliant | | 0
 |
AMEL10-12SAZ
 | Aimtec | RoHS : Compliant | | 0
 |
AMELA2012S-R22MT
 | Abracon Corporation | RoHS : Compliant | | 0
 |
 ECCO | 1000120000
| ITT Interconnect Solutions | | | 994
 |
0583012000
| ITT Interconnect Solutions | | | 842
 |
040-0034-012
| ITT Interconnect Solutions | | | 442
 |
0570363012
| ITT Interconnect Solutions | | | 263
 |
CM111-02-1000-012
| ECCO Connectors | | | 45
 |
CM111-03-1250-012
| ECCO Connectors | | | 28
 |
19070-0121
| Molex | RoHS : Compliant | | 25
 |
130774-0124-MS
| ITT Interconnect Solutions | | | 15
 |
M39012/05-0503
| Amphenol RF | | | 12
 |
97-60-12P
| Amphenol Industrial Operations | | | 10
 |
97-60-12P
| Amphenol Industrial Operations | | | 10
 |
130775-0012-MS
| ITT Interconnect Solutions | | | 5
 |
130775-0124-MS
| ITT Interconnect Solutions | | | 3
 |
130775-0124
| ITT Interconnect Solutions | | | 3
 |
1000123000
| ITT Interconnect Solutions | | | 2
 |
 Flip Electronics | FDMC012N03
| onsemi | Stock, Ship Today RoHS : Compliant | | 33,000
 |
L170-5780701200000
| Lumileds | Stock, Ship Today RoHS : Compliant | | 11,000
 |
NVMJD012N06CLTWG
| onsemi | Stock, Ship Today RoHS : Compliant | | 9,000
 |
CY7C1012AV33-10BGC
 | Cypress Semiconductor | Stock RoHS : Not Compliant | | 4,938
 |
NCP152MX280120TCG
| onsemi | Stock, Ship Today RoHS : Compliant | | 4,123
 |
FODM3012-NF098
| onsemi | Stock, Ship Today RoHS : Compliant | | 3,915
 |
NCP1012AP133G
 | onsemi | Stock, Ship Today RoHS : Compliant | | 3,800
 |
FFSH30120A-F155
| onsemi | Stock, Ship Today RoHS : Compliant | | 2,700
 |
PCFFS10120AF
| onsemi | Stock, Ship Today RoHS : Compliant | | 2,645
 |
FOD8012A
| onsemi | Stock, Ship Today RoHS : Compliant | | 2,078
 |
NTST40120CTG
 | onsemi | Stock, Ship Today RoHS : Compliant | | 1,143
 |
FFSH50120A
| onsemi | Stock, Ship Today RoHS : Compliant | | 720
 |
DSEP30-12AR
| Littelfuse Inc | Stock RoHS : Compliant | | 210
 |
S29GL128S10TFV012
| Cypress Semiconductor | Stock | | 103
 |
NOIP1SE012KA-GTI
| onsemi | Stock, Ship Today RoHS : Compliant | | 8
 |
 Pasternack Enterprises US | M39012/25-0012
| Pasternack Enterprises | Key Specifications, Connector Series: N, Connector Gender: Male, Chain Option: Chain. N Male Open Circuit Connector Cap with 3.75 Inch Chain. Pasternack’s M39012/25-0012 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a N-type connector series and a male gender. Our N-type male non-shorting connector cap is manufactured with a brass body material and silver body plating. Our silver-plated dust cap comes with a 3.75-inch long chain to prevent loss and misplacement. Our M39012/25-0012 dust cap has a length of 4.95 inches, a width of 0.78 inches, and a height of 0.78 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this N-type male connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The M39012/25-0012 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements. | 1 : $37.69 25 : $35.81 50 : $33.92 100 : $32.41
|
| 837
 |
PE3C0120-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Right Angle with Times Connectors Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C0120-12, can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0120-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0120-12 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax. | 1 : $80.49 25 : $76.47 50 : $72.44 100 : $69.22
|
| 254
 |
PE3M0120-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 SMA Male to SMA Male Right Angle Cable 12 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3029 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3029 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0120-12, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3029 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3029 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0120-12 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/55-3029 SMA cable assembly is manufactured with M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3029 SMA male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0120-12 can also be used in the other direction and will be right angle M39012/56-3129 SMA male to M39012/55-3029 SMA male cable assembly if the opposite connectivity is required. M39012/55-3029 SMA plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3029 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax. | 1 : $415.99 25 : $395.19 50 : $374.39
|
| 48
 |
PE3W05610-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Reverse Polarity TNC Female Bulkhead to Reverse Polarity TNC Male Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly reverse polarity TNC female bulkhead to reverse polarity TNC male cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC female bulkhead to reverse polarity TNC male cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and reverse polarity TNC cable connection on the other. Our reverse polarity TNC to reverse polarity TNC cable assemblies have a female gender on end 1 and male on end 2. This reverse polarity TNC to reverse polarity TNC cable is a female to male coax assembly, PE3W05610-12, can also be known as a reverse polarity TNC jack to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC jack to reverse polarity TNC plug cable assembly PE3W05610-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity TNC female bulkhead to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05610-12 can also be used in the other direction and will be reverse polarity TNC male to reverse polarity TNC female bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity jack bulkhead to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC female bulkhead to reverse polarity TNC male cable 12 inch length using PE-SR402FLJ coax. | 1 : $149.99 25 : $142.49 50 : $134.99 100 : $128.99
|
| 20
 |
PE910121
| Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: 30 Degree, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Passivated Stainless Steel. 2.92mm Plug to 2.92mm Jack 30 Degree Adapter., The 2.92mm 30 degree adapter PE910121 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.25:1. This RF adapter has a plug to jack gender configuration, which provides easier connections in tighter spaces. Our 2.92mm to 2.92mm adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 40 GHz. This in-series RF adapter has a dielectric withstanding voltage of 750 Vrms. This 2.92mm plug to 2.92mm jack adapter is one of the many RF components that ship the same business day as they are ordered. The PE910121 plug 2.92mm to jack 2.92mm adapter has a 30 degree body. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. Our adapter has a maximum insertion loss of 0.316 dB. This RF adapter has a 0.969-inch length, 0.313-inch width, and 0.015 lbs weight. The PE910121 adapter from Pasternack is made from a passivated stainless steel connector body and has a beryllium copper center contact. Our 2.92mm plug to 2.92mm jack 30 degree radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This RF adapter has an operating temperature range of -55 to 105 degrees C. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of 30 degree 2.92mm to 2.92mm radio frequency adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz RF adapter that meets your requirements. | 1 : $427.99 5 : $419.43 10 : $410.87 25 : $402.31
|
| 16
 |
PE3W09270-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity TNC Plug to N Female Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity TNC plug to N female cable 12 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity TNC plug to N female cable 12 inch length using RG142 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC cable connection on one end and N type cable connection on the other. Our reverse polarity TNC to type N cable assemblies have a plug gender on end 1 and female on end 2. PE3W09270-12 can also be known as a reverse polarity TNC male to N type jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC male to type N jack cable assembly PE3W09270-12 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity TNC plug to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09270-12 can also be used in the other direction and will be N type female to reverse polarity TNC plug cable assembly if the opposite connectivity is required. TNC reverse polarity male to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC plug to N female cable 12 inch length using RG142 coax. | 1 : $104.99 25 : $99.74 50 : $94.49 100 : $90.29
|
| 12
 |
PE7430-12
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 12 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 12 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 2 Watts Up to 40 GHz. PE7430-12 is a fixed 12 dB attenuator from Pasternack. This 12dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7430-12 12 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7430-12 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 12dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $385.99 10 : $370.55 25 : $355.11 100 : $339.67
|
| 10
 |
PE3W01240-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Clamped SMA Male to SMA Male Low Loss Cable 12 Inch Length Using PE-P195 Coax., Radio frequency assembly clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01240-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01240-12 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax. | 1 : $133.99 25 : $127.29 50 : $120.59 100 : $115.23
|
| 0
 |
PE3C9012
| Pasternack Enterprises | | | 0
 |
PE3M0128/SP1
| Pasternack Enterprises | | | 0
 |
PE3W01249-12
| Pasternack Enterprises | | 1 : $316.99 25 : $301.14 50 : $285.29 100 : $272.61
|
| 0
 |
PE3W01260/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly N male to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W01260/HS-24 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01260/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Type N plug to SMA plug cable assembly PE3W01260/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01260/HS-24 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $86.69 25 : $82.36 50 : $78.02 100 : $74.55
|
| 0
 |
PE3W01269LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to Reverse Thread SMA Female Bulkhead Cable Using RG178 Coax with HeatShrink, LF Solder. PE3W01269LF/HS is a SMP female right angle to reverse thread SMA female bulkhead cable using RG178 coax. This Pasternack SMP female right angle to reverse thread SMA female bulkhead cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. SMP right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to reverse thread female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01269LF/HS SMP female right angle to SMA reverse thread female bulkhead cable assembly is constructed with RG178 coax. | | 0
 |
PE3W03012
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG178 Coax., Radio frequency assembly SMA male to SMA male cable using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE3W03012 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMA plug cable assembly PE3W03012 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W03012 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | | 0
 |
PE3W21012LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using PE-P195 Coax with HeatShrink, LF Solder. PE3W21012LF/HS is a N male to BNC male cable using PE-P195 coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21012LF/HS N male to BNC male cable assembly is constructed with PE-P195 coax. | | 0
 |
 Teledyne HiRel | 5962-87691012A
| Teledyne HiRel | DATA SEL/MULTIPLEXER, 8-INPUT RoHS : Not Compliant | | 0
 |
5962-87758012A
| Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | | 0
 |
5962-87630012A
| Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | | 0
 |
5962-87554012A
 | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | | 0
 |
5962-87615012A
| Teledyne HiRel | AND GATE, QUAD 2-INPUT RoHS : Not Compliant | | 0
 |
5962-87697012A
| Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | | 0
 |
5962-88520012A
| Teledyne HiRel | FLIP-FLOP, D-TYPE, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET RoHS : Not Compliant | | 0
 |
5962-88639012A
 | Teledyne HiRel | LATCH, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | | 0
 |
80019012C
 | Teledyne HiRel | AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS | | 0
 |
5962-87626012A
 | Teledyne HiRel | FLIP-FLOP, D-TYPE, HEX, WITH MASTER RESET RoHS : Not Compliant | | 0
 |
5962-88755012A
| Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT RoHS : Not Compliant | | 0
 |
5962-87627012A
| Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | | 0
 |
5962-88771012A
| Teledyne HiRel | SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH COMMON PARALLEL I/O PINS, TTL-COMP RoHS : Not Compliant | | 0
 |
5962-89550012A
| Teledyne HiRel | EXCLUSIVE-OR GATE, QUAD 2-INPUT RoHS : Not Compliant | | 0
 |
5962-89729012A
| Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT RoHS : Not Compliant | | 0
 |
 Waytek, Inc. | 19070-0121
| Molex | 12-10 GA #8 Ring Terminal Yellow Insulated Vinyl RoHS : Compliant | 50 : $0.1976 200 : $0.1905 500 : $0.1832 1,000 : $0.1748 5,000 : $0.1677
|
| 3,736
 |
12020125-L
| Aptiv PLC | 20-18 GA Male Metri-Pack 630 Loose Piece Terminal 12020125-L | 25 : $0.5402 50 : $0.5225 100 : $0.5063 200 : $0.4841 500 : $0.4694 1,000 : $0.4546
|
| 2,987
 |
39100-2012
| Molex | 18-10 GA Terminal Strip 10 MM EuroStyle 600V 12 Pole 30A REPLACED 47161 47153 | 1 : $5.3869 10 : $4.8934 50 : $4.5013 100 : $4.2356 200 : $3.9699 500 : $3.8054
|
| 2,349
 |
160-012
| AFC Cable Systems Inc | Non-Metallic Electrical Tubing Black 3/8" 100 FT UL LIQUID TIGHT | 100 : $0.9533 500 : $0.9005
|
| 2,200
 |
12020126
| Aptiv PLC | 16-14 GA Male Metri-Pack 630 Terminal 12020126 2000/Reel RoHS : Compliant | 2,000 : $0.2009 10,000 : $0.1876
|
| 2,000
 |
3210127613
| ShawCor Ltd | DSG-Canusa 3210127613 heat shrink is green/yellow 1/2" polyolefin tubing on a 200' spool. It identifies ground wires and terminals, is rated for 1 kV and 90C continuous use, and provides flexible, flame-retardant insulation that resists oils, chemicals, and fungus. | 200 : $0.9842 1,000 : $0.8852
|
| 1,400
 |
7000129482
| 3M | 3" Round Red Reflector 3M 989 DIAMOND GRADE TAPE EXCEEDS DOT SAE A REQUIRMENTS | 10 : $1.585 50 : $1.4142 100 : $1.2843 200 : $1.2366 500 : $1.1956 1,000 : $1.1546
|
| 1,030
 |
7000129481
| 3M | 3" Round Amber Reflector 3M 989 DIAMOND GRADE TAPE EXCEEDS DOT SAE A REQUIRMENTS | 10 : $1.5542 50 : $1.3867 100 : $1.2594 200 : $1.2126 500 : $1.1724 1,000 : $1.1322
|
| 807
 |
C01620H00311012
| Amphenol Sine Systems | Amphenol Sine Systems C01620H00311012 ecomate plastic male straight cable connector has 3+PE contacts, screw termination, and a black backshell. Rated 16A at 400V with IP65/IP67 protection, it includes cable clamp and strain relief for 6-12.5 mm cable. | 1 : $9.79 5 : $9.14 10 : $8.21 50 : $7.92 100 : $7.5 200 : $7.38
|
| 642
 |
67004-0012
| Ideal Clamp Products Inc | Stainless Steel Hose Clamp Size #12 Band 1/2" 1/2" TO 1-1/4" | 10 : $1.8745 50 : $1.6662 100 : $1.5119 200 : $1.4657 500 : $1.4117 1,000 : $1.3577
|
| 386
 |
C01620G00310012
| Amphenol Sine Systems | Amphenol Sine Systems C01620G00310012 ecomate plastic female receptacle has 3+PE contacts, screw termination, and silver-plated contacts. Rated 16A at 400V with IP65/IP67 sealing, it provides a panel-mount mating interface for ecomate male cable connectors. | 1 : $9.82 5 : $9.17 10 : $8.23 50 : $7.94 100 : $7.52 200 : $7.41
|
| 277
 |
TB200-12
| Eaton Electronics | Double Row 12 Position 3 Holes Terminal Block 30A 300V Max #6-32 SCREWS | 1 : $17.95 10 : $16.16 50 : $14.83 100 : $13.45 200 : $12.47 500 : $11.57
|
| 94
 |
3901-2020
| Molex | 2 Pin Receptacle Mini-Fit JR MOLEX PN 39012020 | 30 : $0.3268 50 : $0.2946 100 : $0.2703 200 : $0.2582 500 : $0.2448 1,000 : $0.2327
|
| 0
 |
HDBB-210-1-250
| 3M | 3M HDBB-210-1-250 heat shrinkable cable breakout boot is a 2-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses flame-retardant polyolefin with adhesive sealing, and has 1.20"/0.60" outlet dimensions with a 2:1 shrink ratio. | 1 : $44.24 5 : $39.43 10 : $36.8 20 : $36.29 50 : $34.83 100 : $33.07
|
| 0
 |
12020125
| Aptiv PLC | 20-18 GA Male Metri-Pack 630 Terminal 12020125 2500/Reel | 2,500 : $0.2019 12,500 : $0.1981
|
| 0
 |
 Win Source Electronics | UPZ2012E601-2R0TF
| Sunlord | RoHS : Compliant | 16,760 : $0.0179 12,565 : $0.0199 9,710 : $0.0206 7,045 : $0.0213 4,550 : $0.022 1,870 : $0.0268
|
| 788,361
 |
C2012X5R1V226M125AC
 | TDK Corporation | CAP CER 22UF 35V X5R 0805 RoHS : Compliant | 1,680 : $0.1787 1,255 : $0.1993 970 : $0.2062 705 : $0.213 455 : $0.2199 190 : $0.268
|
| 512,700
 |
DFE252012P-1R0M=P2
| Murata Manufacturing Co Ltd | Inductor Power Shielded Wirewound 1uH 20% 1MHz Metal 3.2A 0.042Ohm DCR 1008 T/R / FIXED IND 1UH 4.3A 42 MOHM SMD RoHS : Compliant | 5,120 : $0.0586 3,825 : $0.0654 2,955 : $0.0677 2,150 : $0.0699 1,390 : $0.0722 570 : $0.0879
|
| 180,000
 |
ACM2012-201-2P-T002
| TDK Corporation | CMC 350MA 2LN 200 OHM SMD RoHS : Compliant | 5,115 : $0.0587 3,820 : $0.0655 2,955 : $0.0677 2,145 : $0.07 1,390 : $0.0722 570 : $0.088
|
| 118,000
 |
885012206095
| Wurth Elektronik | CAP CER 0.1UF 50V X7R 0603 RoHS : Compliant | 6,865 : $0.0437 5,125 : $0.0488 3,970 : $0.0504 2,880 : $0.0521 1,860 : $0.0538 765 : $0.0655
|
| 92,000
 |
ACM4520-901-2P-T000
| TDK Corporation | CMC 2.3A 2LN 900 OHM SMD RoHS : Compliant | 605 : $0.4962 455 : $0.5535 350 : $0.5726 255 : $0.5917 165 : $0.6107 70 : $0.7443
|
| 80,000
 |
01220088Z
| Littelfuse Inc | FUSE CLIP CARTRIDGE 250V 30A PCB / Fuse Blocks and Clips - For 3AG Fuses RoHS : Compliant | 1,070 : $0.2811 800 : $0.3135 620 : $0.3243 450 : $0.3351 290 : $0.3459 120 : $0.4216
|
| 50,000
 |
0452012.MRL
| Littelfuse Inc | FUSE BRD MNT 12A 72VAC 60VDC SMD RoHS : Compliant | 1,900 : $0.1579 1,420 : $0.1761 1,100 : $0.1821 800 : $0.1882 515 : $0.1943 215 : $0.2368
|
| 48,000
 |
ACM2012-361-2P-T002
| TDK Corporation | CMC 220MA 2LN 360 OHM SMD RoHS : Compliant | 3,780 : $0.0794 2,825 : $0.0886 2,185 : $0.0917 1,585 : $0.0947 1,025 : $0.0978 420 : $0.1191
|
| 40,000
 |
1062-20-0122
| TE Connectivity | CONN SCKT 16-22AWG NICKEL CRIMP / Socket Contact Nickel Crimp 16-22 AWG Power, Stamped RoHS : Compliant | 1,270 : $0.2367 950 : $0.264 735 : $0.2731 535 : $0.2822 345 : $0.2913 145 : $0.3551
|
| 28,000
 |
0039012060
| Molex | CONN RCPT HSG 6POS 4.20MM / 6 Rectangular Connectors - Housings Receptacle Natural 0.165" (4.20mm) RoHS : Compliant | 5,150 : $0.0653 3,850 : $0.0728 2,980 : $0.0753 2,160 : $0.0778 1,395 : $0.0803 575 : $0.0979
|
| 26,850
 |
AXT640124
| Panasonic Electronic Components | CONN HEADER F4S .4MM 40POS SMD RoHS : Compliant | 915 : $0.3293 685 : $0.3673 530 : $0.38 385 : $0.3926 250 : $0.4053 105 : $0.494
|
| 11,500
 |
23-23B/R6GHBHC-A01/2A
| Everlight Electronics Co Ltd | LED RGB CLEAR 4SMD / Red, Green, Blue (RGB) 624nm Red, 525nm Green, 470nm Blue LED Indication - Discrete 2V Red, 3.3V Green, 3.3V Blue 4-SMD, No Lead RoHS : Compliant | 2,495 : $0.1204 1,865 : $0.1343 1,440 : $0.139 1,045 : $0.1436 675 : $0.1482 280 : $0.1806
|
| 8,500
 |
1062-16-0122
| TE Connectivity | CONN SCKT 14-18AWG NICKEL CRIMP / Socket Contact Nickel Crimp 14-18 AWG Power, Stamped RoHS : Compliant | 3,600 : $0.0834 2,690 : $0.093 2,080 : $0.0962 1,510 : $0.0994 975 : $0.1026 400 : $0.1251
|
| 1,712
 |
DCP012415DBP-U/700
 | Texas Instruments | IC REG ISOLATED +/-15V 33MA 7SOP RoHS : Compliant | 13 : $23.2125 10 : $25.8909 8 : $26.7837 6 : $27.6765 4 : $28.5693 2 : $34.8188
|
| 513
 |
 Wuhan P&S | MFU0603FF01250P500
| Vishay Intertechnologies | Thin Film Chip Fuses RoHS : Compliant | 1 : $0.66 100 : $0.22 500 : $0.21 1,000 : $0.2
|
| 140,000
 |
VS-E5PH6012L-N3
| Vishay Intertechnologies | Hyperfast Rectifier, 60A,1200V RoHS : Compliant | 1 : $7.72 100 : $2.58 500 : $2.38 1,000 : $2.32
|
| 89,000
 |
TNPW02012K49BEED
| Vishay Intertechnologies | High Stability Thin Film Flat Chip Resistors��2.49 k�� ��0.1% 0.075W RoHS : Compliant | 1 : $0.52 100 : $0.18 500 : $0.16 1,000 : $0.16
|
| 60,000
 |
VS-E5PH3012L-N3
| Vishay Intertechnologies | Hyperfast Rectifier, 30A FRED Pt G5 RoHS : Compliant | 1 : $5.65 100 : $1.89 500 : $1.75 1,000 : $1.7
|
| 35,325
 |
10122655-101LF
| Amphenol FCi | 10Row,120P,2mm,Right Angle Receptacle RoHS : Compliant | 1 : $17.27 100 : $16.69 500 : $16.3 1,000 : $16.01
|
| 31,320
 |
NLV14012BDR2G
 | onsemi | RoHS : Compliant | 1 : $0.46 100 : $0.3 500 : $0.24 1,000 : $0.23
|
| 17,500
 |
10127850-001LF
| Amphenol FCi | Headers & Wire Housings,IDC Terminal,SMT RoHS : Compliant | 1 : $0.23 100 : $0.22 500 : $0.21 1,000 : $0.21
|
| 15,000
 |
NTH4L012N065M3S
| onsemi | SIC MOS TO247-4L 12MOHM 6 RoHS : Compliant | 1 : $28.59 100 : $18.25 500 : $15.05 1,000 : $13.84
|
| 10,350
 |
10124620-4444P00LF
| Amphenol FCi | AirMax Power Connectors, Power Solutions, 2-Pair, 2 Column, 12-Position, Right Angle Receptacle, Press-Fit RoHS : Compliant | 1 : $5.65 100 : $2.26 500 : $2.09 1,000 : $2.04
|
| 20
 |
STBR6012W
| STMicroelectronics | - RoHS : Compliant | 1 : $15.4 100 : $5.14 500 : $4.75 1,000 : $4.62
|
| 20
 |
NOIX1SN012KBLFB-GEVB
| onsemi | - | 1 : $2,265.8 100 : $1,446.26 500 : $1,192.53 1,000 : $1,096.36
|
| 1
 |
NOIX1SE012KBLFB-GEVB
| onsemi | - | 1 : $2,265.8 100 : $1,446.26 500 : $1,192.53 1,000 : $1,096.36
|
| 1
 |