PRODUCT DESCRIPTION
The ADN2849 is a low power 10.7Gbps driver for electro-absorption modulator (EAM) applications. The modulation voltage is programmable via an external voltage up to a maximum swing of 3V when driving 50Ω. The bias offset voltage and output eye cross point are also programmable. On-chip 50Ω resistor is provided for back termination of the output. The ADN2849 is driven by AC coupled differential CML level data and has selectable data retiming to remove jitter from data input signal. The modulation voltage can be enabled or disabled by driving the MOD_ENB pin with the proper logic levels. It can operate with positive or negative (5.2V or 5.0V) supply voltage.
The ADN284949 is available in a compact 4x4mm plastic package or dice format.

FEATURES
   Data Rates up to 10.709Gb/s
   Typical Rise/Fall Time 27ps
   Power Dissipation 900mW (at 2V swing, 1V offset)
   Programmable Modulation Voltage up to 3V
   Programmable Bias Offset Voltage up to 2V
   Voltage-input control for offset, modulation
   Cross Point Adjust Range 30%- 85%
   Selectable Data Retiming
   PECL/CML Data & Clock Inputs
   50Ω on Chip Data & Clock Terminations
   Modulation Ebnable/Disable
   |S11|<-10dB , |S22|<-8dB at 10GHz
   Positive or negative 5.2 or 5.0V single supply operation
   Available in dice and 4x4mm 24 Lead LFCSP package

APPLICATIONS
   SONET OC-192 Optical Transmitters
   SDH STM-64 Optical Transmitters
   10Gb Ethernet IEEE802.3
   XFP/X2/XENPACK/MSA-300 Optical Modules