INTRODUCTION
The UT80C196KD is compatible with industry standard’s MCS-96 instruction set. The UT80C196KD is supported by commercial hardware and software development tools.
   
FEATURES
❐ 20MHz 16-bit Microcontroller compatible with Industry Standard’s MCS-96 ISA
    - Register to Register Architecture
    - 1000 Byte Register RAM
❐ Three 8-bit I/O Ports
❐ On-board Interrupt Controller
❐ Three Pulse-Width Modulated Outputs
❐ High Speed I/O
❐ UART Serial Port
❐ Dedicated Baud Rate Generator
❐ Software and Hardware Timers
    - 16-Bit Watchdog Timer, Four 16-Bit Software Timers
    - Three 16-Bit Counter/Timers
❐ Error detection and correction for external memory accesses
❐ QML Q compliant part
❐ Standard Microcircuit Drawing 5962-98583