GENERAL DESCRIPTION

The M660-02 is a dual SAW, selectable frequency VCSO frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator)  function, which results in low output phase noise and very low jitter. The M660-02 is available in a range of center frequencies from 500 to 700MHz.

FEATURES

◆ Two integrated SAW devices

◆ Selectable output frequency

◆ Supports multi-rate optical interface requirements

◆ VCSO center frequencies from 500 to 700 MHz

  (Specify center frequency at time of order)

◆ Low phase jitter 0.19ps rms typical (50kHz-80MHz)

◆ Low phase noise -70dBc/Hz @ 1kHz offset

◆ Differential 3.3V LVPECL output

◆ Single 3.3V power supply

◆ Small 9 x 14mm SMT (surface mount) package