DESCRIPTION
The LX5202 is an eighteen-line active terminator for the SCSI parallel bus. This SCSI standard recommends active termination at both ends of the SCSI bus.
During disconnect mode, the LX5202 requires a meager 60µA of supply current while
offering only 6pF of output capacitance. To enter this low-power mode, the disconnect pin can be left open (floating) or driven high, thereby disconnecting the terminating resistors and placing the internal low dropout regulator into low-power mode. In disconnect mode, each termination line presents a high impedance to the SCSI bus with the overall effect being to preserve high signal integrity and yield subsequent reliable, errorfree communications.

KEY FEATURES
■ 6pF OUTPUT CAPACITANCE DURING DISCONNECT
■ 60µA SUPPLY CURRENT IN DISCON NECT MODE
■ 800µA SUPPLY CURRENT DURING NORMAL OPERATION
■ 200mA SINK CURRENT FOR ACTIVE NEGATION
■ LOGIC COMMAND DISCONNECTS ALL TERMINATION LINES
■ CURRENT LIMIT AND THERMAL PROTECTION
■ COMPATIBLE WITH SCSI 1, 2 AND 3 STANDARDS
■ CONSULT FACTORY FOR APPLICATION TEST REPORT: 5202TR