General Description
The MAX793/MAX794/MAX795 microprocessor (µP) supervisory circuits monitor and control the activities of +3.0V/+3.3V µPs by providing backup-battery switchover, among other features such as low-line indication, µP reset, write protection for CMOS RAM, and a watchdog (see the Selector Guide below). The backup-battery volt age can exceed VCC, permitting the use of 3.6V lithium batteries in systems using 3.0V to 3.3V for VCC.
The MAX793/MAX795 offer a choice of reset threshold voltage range (denoted by suffix letter): 3.00V to 3.15V (T), 2.85V to 3.00V (S), and 2.55V to 2.70V (R). The MAX794’s reset threshold is set externally with a resistor divider. The MAX793/MAX794 are available in 16-pin DIP and narrow SO packages, and the MAX795 comes in 8-pin DIP and SO packages.

Features
MAX793/MAX794/MAX795
♦ Precision Supply-Voltage Monitor:
   Fixed Reset Trip Voltage (MAX793/MAX795)
   Adjustable Reset Trip Voltage (MAX794)
♦ Guaranteed Reset Assertion to VCC = 1V
♦ Backup-Battery Power Switching—Battery
   Voltage Can Exceed VCC
♦ On-Board Gating of Chip-Enable Signals—7ns
   Max Propagation Delay
   MAX793/MAX794 Only
♦ Battery Freshness Seal
♦ Battery OK Output (MAX793)
♦ Uncommitted Voltage Monitor for Power-Fail or
   Low-Battery Warning
♦ Independent Watchdog Timer (1.6s timeout)
♦ Manual Reset Input

Applications
   Battery-Powered Computers and Controllers
   Embedded Controllers
   Intelligent Controllers
   Critical µP Power Monitoring
   Portable Equipment