General Description
The MAX4074–MAX4078 GainAmp™ op amp family combines low-cost Rail-to-Rail® op amps with precision internal gain-setting resistors. Factory-trimmed on-chip resistors decrease design size, cost, and layout, and provide 0.1% gain accuracy. Fixed inverting gains from -0.25V/V to -100V/V or noninverting gains from +1.25V/V to +101V/V are available. These devices operate from a single +2.5V to +5.5V supply and consume just 34µA. GainAmp amplifiers are optimally compensated for each gain version, achieving gain bandwidth (GBW) products up to 4MHz (AV = +25V/V to +101V/V). High-voltage fault protection withstands ±17V at either input without damage or excessive current draw (MAX4074/MAX4075 only).
   
Features
♦ Internal Gain-Setting Resistors in SOT23
    Packages (MAX4074)
♦ 0.1% Gain Accuracy (RF/RG) (MAX4074/75)
♦ 54 Standard Gains Available (MAX4074/75)
♦ Open-Loop, Unity-Gain-Stable Op Amps
    (MAX4076/77/78)
♦ Rail-to-Rail Outputs Drive 1kΩ Load (MAX4074/75)
♦ +2.5V to +5.5V Single Supply
♦ 34µA Supply Current (MAX4074/75)
♦ Up to 4MHz GBW Product
♦ Fault-Protected Inputs Withstand ±17V
    (MAX4074/75)
♦ 200pA max Input Bias Current (MAX4076/77/78)
♦ Stable with Capacitive Loads up to 100pF
    with No Isolation Resistor
 
Applications
    Portable Battery-Powered Equipment
    Instruments, Terminals, and Bar-Code Readers
    Keyless Entry
    Photodiode Preamps
    Smart-Card Readers
    Infrared Receivers for Remote Controls
    Low-Side Current-Sense Amplifiers