Description

CD4016BMS Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.

Features

• Transmission or Multiplexing of Analog or Digital Signals

• High Voltage Type (20V Rating)

• 20V Digital or±10V Peak-to-Peak Switching

• 280ΩTypical On-State Resistance for 15V Operation

• Switch On-State Resistance Matched to Within 10Ω Typ. Over 15V Signal Input Range

• High On/Off Output Voltage Ratio: 65dB Typ. at FIS = 10kHz, RL = 10kΩ

• High Degree of Linearity: <0.5% Distortion Typ. at FIS = 1kHz, VIS = 5Vp-p, VDD-VSS≥10V, RL = 10kΩ

• Extremely Low Off State Switch Leakage Resulting in Very Low Offset Current and High Effective Off State Resistance: 100pA Typ. at VDD-VSS = 18V, TA= 25°C

• Extremely High Control Input Impedance (Control circuit Isolated from Signal Circuit: 1012 ΩTyp.

• Low Crosstalk Between Switches: -50dB Typ. at FIS = 0.9MHz, RL = 1kΩ

• Matched Control Input to Signal Output Capacitance: Reduces Output Signal Transients

• Frequency Response, Switch On = 40MHz (Typ.)

• 100% Tested for Quiescent Current at 20V

• Maximum Control Input Current of 1µA at 18V Over Full Package Temperature Range; 100nA at 18V at +25°C

• 5V, 10V and 15V Parametric Ratings