GENERAL DESCRIPTION
The AD9354 is a radio frequency (RF) transceiver with a single transmitter and dual receivers fully integrated into the device. This allows the part to be used for mobile and fixed WiMAX/WiBro wireless network systems. By incorporating an RF MxFE™, the AD9354 offers the combination of an RF front end and a mixed signal baseband, enabling an easy-to-use JESD-207-compliant digital interface to the baseband application-specific integrated circuit (ASIC) or field-programmable gate array (FPGA). In addition, the AD9354 operates in the 2.3 GHz to 2.7 GHz range, covering most of the licensed and unlicensed bands. Channel bandwidths of 3.5 MHz, 4.375 MHz, 5 MHz, 7 MHz, 8.75 MHz, and 10 MHz are supported. The direct-conversion receivers have state-of-the-art noise

FEATURES
   RF transceiver with integrated ADCs and DACs
   IEEE 802.16 WiMAX/WiBro
   Dual receivers, single transmitter
   Operating band: 2.3 GHz to 2.7 GHz
   3.5 MHz < BW < 10 MHz
   Superior receiver sensitivity with NF < 3.5 dB
   Manual Rx gain or autonomous AGC mode
   Highly linear and spectrally pure transmitter
   Tx EVM = −38 dB
   Tx noise floor < −134 dBm/Hz at fOFFSET > 22 MHz
   Tx power control range of 58 dB, resolution of 0.25 dB
   Integrated fractional-N synthesizer
   10 Hz LO step size
   LO integrated phase noise < 0.4°rms
   Automatic frequency correction < 0.012 ppm
   Industry-standard JESD-207 digital interface
  
APPLICATIONS
   BWA/WiMAX/WiBro
      CPEs
      USB dongles/minicards
   Pico and femto base stations
   Proprietary radio systems