Description
The TDA7571 i is a fully digital switchmode power audio amplifier with I2S digital input and PWM output.
The maximum output current and voltage swing are depending by the output circuitry (power supply, external power transistors and sensing resistors). The device can work as a stereo single-ended channels or a mono bridge power amplifier.

Features
■ Output power 2 x 70W / 1 x 250W @ THD<1%
■ I2S input (FS = 38 to 48kHz)
■ PWM output (FPWM = FS x 8)
■ MCLK input = 256 x FS
■ Operation on 24bit
■ ±30V supply voltage (Max.)
■ St-by
■ Mute
■ Stereo/bridge operation selection
■ Protections against short circuit across the load
■ Chip thermal protection
■ External temperature sensor possibility
■ Thermal warning pins
■ Adjustable clip detector pin