Description

The L6374 is especially designed to be used as a line driver in industrial control systems based on the 24 V signal levels (IEC 61131, 24VDC).

Features

■ Four independent line drivers with 100 mA up to 35 V outputs

■ Input signals between - 7 V and + 35 V, with pre-setting threshold

■ Push-pull outputs with three state control and true zero current between Vs and ground

■ Current limiting on each output effective in the full "ground to Vs" output voltage range

■ Output voltage clamp to Vs and to ground

■ Overtemperature and undervoltage protections

■ Diagnostic for overtemperature, undervoltage and overcurrent

■ Pre-setting delay for overcurrent diagnostic

■ High speed operation: up to 300 kHz with 35 V swing