Features
• Two 5 V voltage regulators for microcontroller
and peripheral supply
• No electrolytic capacitor required on regulator
outputs
• Ultra low quiescent current in standby modes
• Programmable reset generator for power-on
and undervoltage
• Configurable window watchdog and fail safe
output
• LIN 2.1 compliant (SAEJ2602 compatible)
transceiver
• Advanced high speed CAN transceiver (ISO
11898-2/-5 and SAE J2284 compliant) with
local failure and bus failure diagnosis and
selective wake-up functionality according to
ISO 11898-6
• Complete 3 channel contact monitoring
interface with programmable cyclic sense
functionality
• Programmable periodic system wake-up
feature
• ST SPI interface for mode control and
diagnosis
• 5 fully protected high-side drivers with internal
4-channel PWM generator
• 2 low-side drivers with active Zener clamping
• 4 Internal PWM timers
• 2 operational amplifiers with rail-to-rail outputs
(VS) and low voltage inputs
• Temperature warning and thermal shutdown