1 Features
• Dual-H-Bridge Motor Driver
– Capable of Driving Two DC Motors or One
Stepper Motor
– Low-MOSFET ON-Resistance:
HS + LS 305 mΩ
• 1.5-A Maximum Drive Current Per H-Bridge
• Configure Bridges Parallel for 3-A Drive Current
• Separate Motor and Logic-Supply Pins:
– 0-V to 11-V Motor-Operating Supply-Voltage
– 2-V to 7-V Logic Supply-Voltage
• Separate Logic and Motor Power Supply Pins
• Flexible PWM or PHASE/ENABLE Interface
• Low-Power Sleep Mode With 95-nA Maximum
Supply Current
• Tiny 2.00-mm × 3.00-mm WSON Package

2 Applications
• Battery-Powered:
– Cameras
– DSLR Lenses
– Consumer Products
– Toys
– Robotics
– Medical Devices

3 Description
The DRV8835 provides an integrated motor driver
solution for cameras, consumer products, toys, and
other low-voltage or battery-powered motion control
applications. The device has two H-bridge drivers,
and drives two DC motors or one stepper motor, as
well as other devices like solenoids. The output driver
block for each consists of N-channel power
MOSFETs configured as an H-bridge to drive the
motor winding. An internal charge pump generates
gate drive voltages.
The DRV8835 supplies up to 1.5-A of output current
per H-bridge and operates on a motor power supply
voltage from 0 V to 11 V, and a device power supply
voltage of 2 V to 7 V.
PHASE/ENABLE and IN/IN interfaces are compatible
with industry-standard devices.
Internal shutdown functions are provided for
overcurrent protection, short circuit protection,
undervoltage lockout, and overtemperature.
The DRV8835 is packaged in a tiny 12-pin WSON
package (Eco-friendly: RoHS and no Sb/Br).