DESCRIPTION
The MP5016 is a protection device designed to
protect circuitry on the output from transients on
the input. The MP5016 also protects the input
from undesired shorts and transients coming
from the output.
During start-up, the inrush current is limited by
limiting the slew rate at the output. The slew
rate is controlled by the DV/DT pin setting and
MODE pin setting.
The maximum load at the output is currentlimited. The magnitude of the current limit is
controlled by an external resistor from ILIMIT to
GND. There is a fixed 2.5A current limit when
ILIMIT is floating.
The output voltage is limited by the output overvoltage protection (OVP) function. The clamp
voltage can be set by the MODE connection.
The MP5016 offers a GATE drive signal
connected to an external N-channel MOSFET
gate to block current flowing from the output to
the input when the IC is in enable off, power
shutdown, or thermal shutdown.
The MP5016 is available in a QFN-10
(1.5mmx2mm) package.

FEATURES
 Wide 2.7V to 15V Operating Input Range
 26V Absolute Maximum Transient Input
Voltage
 Selectable Over-Voltage Clamp Threshold
 Fast Output Over-Voltage Protection (OVP)
Response
 Integrated 43mΩ Power MOSFET
 Adjustable Current Limit or Fixed Current
Limit when Floating ILIMIT
 Reverse-Blocking MOSFET Driver
 Soft-Start Time Programmable through
DV/DT and MODE
 Fast Response for Hard Short Protection
 Over-Current Protection (OCP) Hiccup
Protection
 Thermal Shutdown and Auto-Retry
 Available in a QFN-10 (1.5mmx2mm)
Package

APPLICATIONS
 HDD, SSD
 Hot Swaps
 Wireless Modem Data Cards
 PC Cards
 USB Power Distribution
 USB Protection
 USB3.1 Power Delivery