1 Features
1• Qualified for Automotive Applications
• Qualified in Accordance With AEC-Q100
• Output Swing Includes Both Supply Rails
• Low Noise: 9 nV/√Hz Typ at ƒ = 1 kHz
• Low Input Bias Current: 1 pA Typical
• Fully Specified for Both Single-Supply and Split-
Supply Operation
• Common-Mode Input Voltage Range Includes
Negative Rail
• High-Gain Bandwidth: 2.2 MHz Typical
• High Slew Rate: 3.6 V/μs Typical
• Low Input Offset Voltage 2500-μV Max at T A =
25°C
• Macromodel Included

2 Applications
• Supports Extreme Temperature Applications:
– Controlled Baseline
– One Assembly and Test Site
– One Fabrication Site
– Available in Extreme (–40°C to 150°C)
Temperature Range (1)
– Extended Product Life Cycle
– Extended Product-Change Notification
– Product Traceability
– Texas Instruments' high temperature products
use highly-optimized silicon (die) solutions with
design and process enhancements to
maximize performance over extended
temperatures. All devices are characterized
and qualified for 1000 hours continuous
operating life at maximum rated temperature.

3 Description
The TLC2274 is a quadruple operational amplifier
from Texas Instruments. The device exhibits rail-to- rail output performance for increased dynamic range
in single- or split-supply applications. The TLC2274
offers 2 MHz of bandwidth and 3 V/μs of slew rate for
higher speed applications. These device offers comparable ac performance while having better
noise, input offset voltage, and power dissipation than
existing CMOS operational amplifiers. The TLC2274
has a noise voltage of 9nV/√Hz, two times lower than
competitive solutions.
The TLC2274, exhibiting high input impedance and
low noise, is excellent for small-signal conditioning for
high-impedance sources, such as piezoelectric
transducers. Because of the micropower dissipation
levels, this device works well in hand-held monitoring
and remote-sensing applications. In addition, the railto-
rail output feature, with single- or split-supplies,
makes this device a great choice when interfacing
with analog-to-digital converters (ADCs). This family is fully characterized at 5 V and ±5 V.
It offers increased output dynamic range, lower noise
voltage, and lower input offset voltage. This
enhanced feature set allows the device to be used in
a wider range of applications.