Controlled Baseline
− One Assembly/Test Site, One Fabrication
Site
Extended Temperature Performance of
−40°C to 125°C
Enhanced Diminishing Manufacturing
Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree†
3-State Version of ’HC153
Wide Operating Voltage Range of 2 V to 6 V
High-Current Inverting Outputs Drive Up To
15 LSTTL Loads
Low Power Consumption, 80-μA Max ICC
Typical tpd = 9 ns
±6-mA Output Drive at 5 V
Low Input Current of 1 μA Max
Permit Multiplexing From n Lines to One
Line
Perform Parallel-to-Serial Conversion

description/ordering information
Each data selector/multiplexer contains inverters and drivers to supply full binary decoding data selection to the
AND-OR gates. Separate output-control inputs are provided for each of the two 4-line sections.
The 3-state outputs can interface with and drive data lines of bus-organized systems. With all but one of the
common outputs disabled (in the high-impedance state), the low impedance of the single enabled output drives
the bus line to a high or low logic level. Each output has its own output-enable (OE) input. The outputs are
disabled when their respective OE is high.