1FEATURES
2(Typical 5V Supply, Unless Otherwise Noted)
• Input Referred Voltage Noise 5.8 nV/√Hz
• Input Bias Current 100 fA
• Unity Gain Bandwidth 17 MHz
• Supply Current per Channel
– LMV796/LMV796Q 1.15 mA
– LMV797 1.30 mA
• Rail-to-Rail Output Swing
– @ 10 kΩ Load 25 mV from Rail
– @ 2 kΩ Load 45 mV from Rail
• Guaranteed 2.5V and 5.0V Performance
• Total Harmonic Distortion 0.01% @ 1kHz, 600Ω
• Temperature Range −40°C to 125°C
• LMV796Q is an Automotive Grade Product that
is AEC-Q100 Grade 1 Qualified and is
Manufactured on an Automotive Grade Flow.

APPLICATIONS
• Photodiode Amplifiers
• Active Filters and Buffers
• Low Noise Signal Processing
• Medical Instrumentation
• Sensor Interface Applications
• Automotive

DESCRIPTION
The LMV796/LMV796Q (Single) and the LMV797
(Dual) low noise, CMOS input operational amplifiers
offer a low input voltage noise density of 5.8 nV/√Hz
while consuming only 1.15 mA (LMV796/LMV796Q)
of quiescent current. The LMV796/LMV796Q and
LMV797 are unity gain stable op amps and have gain bandwidth of 17 MHz. The LMV796/LMV796Q/
LMV797 have a supply voltage range of 1.8V to 5.5V
and can operate from a single supply. The
LMV796/LMV796Q/LMV797 each feature a rail-to-rail
output stage capable of driving a 600Ω load and
sourcing as much as 60 mA of current.
The LMV796/LMV796Q family provides optimal
performance in low voltage and low noise systems. A
CMOS input stage, with typical input bias currents in
the range of a few femtoAmperes, and an input
common mode voltage range, which includes ground,
make the LMV796/LMV796Q and the LMV797 ideal
for low power sensor applications.
The LMV796/LMV796Q/LMV797 are manufactured
using TI’s advanced VIP50 process. The LMV796/ LMV796Q are offered in 5–pin SOT-23 package. The
LMV797 is offered in 8–pin VSSOP package.