1FEATURES
• (VS = 5V, TA = 25°C Typical Values Unless
Specified)
• Input Common Mode Voltage 0.5V Beyond
Rails
• Output Voltage Swing (RL = 2kΩ) 50mV from
Rails
• Output Short Circuit Current +310/−410mA
• Continuous Output Current 75mA
• Supply Current (Per Amp, No Load) 750μA
• Supply Voltage Range 5V to 13V
• Unity Gain Stable
• −3dB Bandwidth (AV = +1) 24MHz
• Slew Rate 11V/μSec
• Settling Time 270ns
• SOIC and TSSOP Package
• Manufactured in Texas Instruments' State-of-
the-Art Bonded Wafer, Trench Isolated
Complementary Bipolar VIP10 Technology for
High Performance at Low Power Levels

APPLICATIONS
• LCD Panel VCOM Driver
• LCD Panel Gamma Buffer
• LCD Panel Repair Amp

DESCRIPTION
The LM6584 is a low power, high voltage, rail-to-rail
input-output amplifier ideally suited for LCD panel
VCOM driver and gamma buffer applications. The LM6584 contains four unity gain stable amplifiers in
one package. It provides a common mode input
ability of 0.5V beyond the supply rails, as well as an
output voltage range that extends to within 50mV of
either supply rail. With these capabilities, the LM6584
provides maximum dynamic range at any supply
voltage. Operating on supplies ranging from 5V to
13V, while consuming only 750μA per amplifier, the
LM6584 has a bandwidth of 24MHz (−3dB).
The LM6584 also features fast slewing and settling
times, along with a high continuous output capability of 75mA. This output stage is capable of delivering
approximately 310mA peak currents in order to
charge or discharge capacitive loads. These features
are ideal for use in TFT-LCDs.
The LM6584 is available in the industry standard 14-
pin SOIC package and in the space-saving 14-pin
TSSOP package. The amplifiers are specified for
operation over the full −40°C to +85°C temperature
range.