1 Features
• High-voltage types (20V rating)
– CD4067B – single 16-channel multiplexer or
demultiplexer
• Low ON resistance: 125Ω (typ) over 15Vp-p signalinput
range for VDD–VSS = 15V
• High OFF resistance: channel leakage of
±10pA (typ) at VDD – VSS = 10V
• Matched switch characteristics: RON = 5Ω (typ) for
VDD – VSS = 15V
• Very low quiescent power dissipation under all
digital-control input and supply conditions:
0.2μW (typ) at VDD – VSS = 10V
• Binary address decoding on chip
• 5V, 10V, and 15V parametric ratings
• 100% tested for quiescent current at 20V
• Standardized symmetrical output characteristics
• Maximum input current of 1μA at 18V over full
package temperature range: 100nA at 18V and
25°C
• Meets all requirements of JEDEC tentative
standard No. 13-B, Standard Specifications for
Description of "B" Series CMOS Devices

2 Applications
• Analog signal and digital multiplexing
• Transmission-gate logic implementation
• A/Dl and D/A conversion
• Signal gating

3 Description
CD40x7B CMOS analog multiplexers or
demultiplexers are digitally controlled analog switches
having low ON impedance, low OFF leakage current,
and internal address decoding. When these devices
are used as demultiplexers, the channel in or out
terminals are the outputs and the common out or
in terminals are the inputs. In addition, the ON
resistance is relatively constant over the full inputsignal
range.
The CD4067B is a 16-channel multiplexer with four
binary control inputs, A, B, C, D, and an inhibit input,
arranged so that any combination of the inputs selects
one switch.
A logic "1" present at the inhibit input turns all
channels off.
The CD40x7B types are supplied in 24-lead hermetic
dual-in-line ceramic packages (F3A suffix), 24-lead
dual-in-line plastic packages (E suffix), 24-lead smalloutline
packages (M, M96, and NSR suffixes), and 24-
lead thin shrink small-outline packages (P and PWR
suffixes).