o Comes assembled and tested, includes a JST cable!
o 5V input via mini-B USB connector
o For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
o 500mA charge current, adjustable from 100mA to 1000mA by soldering in a resistor
o Separate JST connectors for battery and load system so batteries don't have to be removed for
charging
o Chip supports a 10K NTC thermistor which we have stuffed as a plain 10K. For people who
require temperature monitors (using high charge rates), remove the 10K and solder in the
thermistor in its place
o 0.1" (2.54mm) breakouts for the battery, DC, and status LEDs
o Free 2-pin JST cable included!
o Batteries and USB cable not included.