1FEATURES
2• Output Current Accuracy (-40°C to +125°C)
• Input Voltage Range: 3V to 5.5V
• 6-Bit Current DAC That Connects Directly to
the Feedback Node of an External Regulator to
Provide Output Voltage Control
• Precision Enable to Support Custom UVLO
• WSON-10 3 mm x 3 mm Footprint, 0.5 mm
Pitch
• Compatible With the TMS320C66XX DSP Smart
Reflex Technology

APPLICATIONS
• Broadband, Networking, and Wireless
Communications
• Notebook and Palmtop Computers, PDAs
• Portable Instruments
• Battery-Powered Equipment
• Powering Digital Loads With a 6-Bit, 4 Pin VID
Interface

DESCRIPTION
The LM10010 is a precision, digitally programmed
device used to control the output voltage of a DC/DC
converter. The LM10010 outputs a DC current
inversely proportional to a 6-bit input word. This
current DAC output connects to the feedback pin of a
regulator in order to adjust its output voltage to a
desired range and resolution set by the user. As the
6-bit word counts up, the output voltage is adjusted
higher based on the setting of the feedback resistors
in the converter.
The LM10010 is designed to program point of load
regulators with adjustable resistor feedback networks
for VID (Voltage Identification).