FEATURES
• Complete Front-End for Bridge Sensors
• Available in an SO Package
• Internal Amplifier, Gain of 64
• Internal Oscillator
• Low-Side Power Switch for Bridge Sensor
• 18-Bit Noise-Free Resolution
• Selectable 10SPS or 80SPS Data Rates
• Simultaneous 50Hz and 60Hz Rejection at
10SPS
• External Voltage Reference up to 5V for
Ratiometric Measurements
• Simple, Pin-Driven Control
• Two-Wire Serial Digital Interface
• Supply Range: 3V to 5.3V
• –40°C to +85°C Temperature Range

APPLICATIONS
• Weigh Scales
• Strain Gauges
• Load Cells
• Industrial Process Control

DESCRIPTION
The ADS1131 is a precision, 18-bit analog-to-digital
converter (ADC). With an onboard, low-noise amplifier, onboard oscillator, precision 18-bit delta-
sigma (ΔΣ) ADC, and bridge power switch, the
ADS1131 provides a complete front-end solution for
bridge sensor applications including weigh scales, strain gauges, and load cells.
The low-noise amplifier has a gain of 64, supporting a full-scale differential input of ±39mV. The ΔΣ ADC
has 18-bit effective resolution and is comprised of a
third-order modulator and fourth-order digital filter.
Two data rates are supported: 10SPS (with both
50Hz and 60Hz rejection) and 80SPS. The ADS1131 can be put into a low-power standby mode or shut off
completely in power-down mode.
The ADS1131 is controlled by dedicated pins; there
are no digital registers to program. Data are output
over an easily-isolated serial interface that connects
directly to the MSP430 and other microcontrollers.
The ADS1131 is available in an SO-16 package and
is specified from –40°C to +85°C.