Description
The Arduino® Portenta Breakout board is designed to assist developers with their prototypes by exposing the highdensity connectors of the Portenta family on both sides of the breakout carrier, providing total flexibility for measuring and controlling signals - developing your own hardware, testing the design and measuring the input and output signals out of the high-density connectors.

Features
Power ON Button
Boot mode DIP switch
Connectors
USBA
RJ45 Ethernet up to 1Gb/s; speed depending on installed board
Micro SD card
MIPI 20T JTAG with trace capability
Power
CR2032 RTC Lithium Battery backup
External power terminal block
I/O
Break out all Portenta high-density connector signals (see pinout table below)
Male/female HD connectors allow interposing breakout between Portenta and shield to debug signals
Compatibility Standard Portenta high-density connector pinout
Safety information Class A