PRODUCT OVERVIEW
The 3B Series of Signal Conditioning I/o Subsystems provide a low-cost, versatile method of transferring analog transducer signals to a data acquisition, monitoring or control system without the inherent noise, non-linearity, drift and extraneous voltages. The modules are designed to directly accept analog signals from Thermocouples, RTD’s, AC and DC Strain Gages, Torque Transducers, Frequency Transducers, LVDTs, millivolt or process current signals. The modules amplify, isolate, linearize and convert the transducer output signals to standardized analog inputs for high-level analog I/O subsystems. The 3B Series Subsystem consists of a 10” relay rack with universal mounting backplane and a family of plug-in (up to 16 per rack) input and output signal conditioning modules

FEATURES
    Interfaces, amplifies, & filters signals from 4-arm AC bridge transducer signals ranging between 1.5mV rms & 150mV rms.
    Module provides an AC excitation voltage of 2V rms to 10V rms at frequencies between 1kHz & 10kHz..
    Module provides simultaneous precision voltage and current outputs.
    Module circuitry can withstand 130v rms at its current output terminals without damage.
    All 3B20 series modules are mix-and-match and Hot Swappable

APPLICATIONS
    Industrial signal conditioning
    Industrial signal isolation
    Industrial signal filtering