OVERVIEW
Broadcoms BCM5364 and BCM5364P, two System-On-Chips, are the most highly integrated access switch processor there are. The BCM5364/BCM5364P also features an on-chip, five-port 10/100 Ethernet switch with management features. This switch processor also offers extensive processor and interface integration featuring an integrated 200-MHz MIPS32™ core, UART, flash and SDRAM/ DDRAM interfaces. The BCM5364P also supports a PCI interface. Both the devices support IPSec encryption and authentication in a single pass.

FEATURES
• The most highly integrated access security processors
• 5-port 10/100 Ethernet switch with integrated PHY (TX/FX)
   • IEEE 802.1Q (VLAN) support; IEEE 802.1P (4 Priority Queues
      - CoS, QoS), DiffServ, ToS support; IEEE 802.1D (Spanning Tree) support
   • 802.1X protocols, IP multicast, IGMP snooping for video streaming applications, broadcast suppression, and hosting of multiple subnets
   • 128-KB on-chip packet buffer
• General purpose 200-MHz MIPS32™ Processor·
   • 8 KB of instruction cache, 4 KB of data cache
• Supports Linux®, VxWorks® operating systems
• BCM5364P supports PCI 2.2, 32-bit/33-MHz host/slave interface
   • Supports four additional PCI devices in host mode
• Extensive interface flexibility
   • Interface to flash memory (up to 32 MB)
   • Interface to SDRAM/DDRAM (up to 512 MB, 100 MHz)
   • GPIO, USB, UART interface
• JTAG/EJTAG support
• 400-pin PBGA package
• Low power, 1.8V core, 3.3V I/O operation
• Linux Open Source application software support
   • Third-party software support