1 Features
• New TL103WB, a pin-compatible upgrade to the
TL103W and TL103WA
• Improved specifications of B version amplifiers:
– Supply range: 3 V to 36 V
– Low maximum input offset voltage: ±3 mV
(25°C) and ±4 mV (full temperature)
– Gain bandwidth: 1.2 MHz
– Total supply current: 600 μA
– EMI rejection: integrated RF and EMI filter
– Temperature range: -40°C to 125°C
• Improved specifications of B version reference:
– Fixed 2.5-V reference
– Tight tolerance maximum of 0.4% (25°C) and
0.8% (full temperature)
– Wide sink-current range:
0.5 mA (typical) to 100 mA

2 Applications
• Battery chargers
• Switch-mode power supplies
• Linear voltage regulation
• Data-acquisition systems

3 Description
The TL103Wx devices combine the building blocks
of a dual operational amplifier and a fixed voltage
reference – both of which are often used in the
control circuitry of both switch-mode and linear
power supplies. OP AMP1 has its non-inverting input
internally tied to a fixed 2.5-V reference, while OP
AMP2 is independent, with both inputs uncommitted.
The upgraded TL103WB features improvements such
as a wider supply range (up to 36 V), lower supply
current (300 μA) and tighter voltage regulation.
This regulation can be achieved through low offset
voltages for both operational amplifiers (0.3 mV
typical) and tight tolerances for the voltage reference
(0.4% at 25°C and 0.8% over operating temperature
range).
The TL103WB has a widened temperature range of
–40°C to 125°C.