characteristic
　Support multiple USB ports at the same time
 2 USB A port outputs
 1 USB B port input
 1 USB C port input and output
 1 lightning input port
　Fast charging specifications
 Any port supports fast charging
 Integrated QC2.0/QC3.0 output fast charging protocol
 Integrated FCP input and output fast charging protocol
Integrated AFC input and output fast charging protocol
Integrated SFCP input and output fast charging protocol
 Integrated high and low voltage SCP output fast charging protocol
Integrated MTK PE+ 1.1&2.0 output fast charging protocol
 Integrated USB C DRP protocol, supports input and output fast charging
 Compatible with BC1.2, Apple and Samsung mobile phone fast charging
 Customizable, supports 1 USB C port input and output + USB C output
 Integrated lightning input decoding
　Integrated USB Power Delivery PD2.0/PD3.0) protocol
 Support PD2.0 bidirectional input and output protocol
Support PD3.0 input and output, PPS output protocol
Supports 5V 9V 12V voltage range input
Supports 5V 9V 12V voltage range output
 PPS supports 5~11V 20mV/step output voltage range
 Integrated hardware bidirectional mark coding and decoding (BMC) protocol
 Integrated physical layer protocol (PHY
Integrated hardware CRC
Support Hard Reset
　Charging specifications
Supports 18w charging, the battery end charging current can reach up to 5.0A
 Adaptive charging current adjustment
Supports 4.20V, 4.3V, 4.35V, 4.40V batteries
　Discharge specifications
 Output current capability:
5V
3.1A 9V 2. 2 2 A 12V 1. 67 A
 Synchronous switch discharge 5V 2A, efficiency reaches over 95%
Support line compensation
　Battery display
 Built-in 14bit ADC and fuel gauge
Supports 1 / 2 / 3 / 4 LED power display
Supports 88, 188 and other digital tube power display
 Intelligent recognition of the number of LED battery indicator lights
　Other functions
 Automatically detect when the phone is plugged in and out
 Fast charging status indicator
Support battery temperature detection
 Intelligent identification of load, automatic enter standby under light load
 Built-in lighting driver
Support I2C interface
　Multiple protections and high reliability
 Input overvoltage and undervoltage protection

 Output over-current, over-voltage and short-circuit protection
 Battery overcharge, over-discharge, and over-current protection
 IC over-temperature protection
 Charge and discharge battery temperature NTC protection
 ESD 4KV, input (including CC pin) withstand voltage 20 V
　BOM minimalist
 Built-in switching power MOS, path MOS
 Single inductor realizes charging and discharging functions
　Package specification: 6 mm × 6 mm 0.5pitch QFN4 0
Overview
IP53
5 6 is an integrated QC2.0/QC 3.0/SCP output fast charging protocol,
FCP/AFC/SFCP input and output fast charging protocol, MTK PE+ 1.1&2.0 input
Out fast charging protocol, USB C PD2.0/PD3.0 input and output protocol, USB C
PD3.0 PPS output protocol, compatible with BC1.2 Apple and Samsung mobile phones, synchronous upgrade
Buck converter, lithium battery charging management, battery power indicator and other multi-functional
Source management SOC provides a complete power solution for fast charging mobile power.
Can support USB A x2 USB B USB C four USB ports at the same time, individually
Use any USB port to support fast charging, and use two or more USB ports at the same time.
When the output port is on, it only supports 5V.
IP53
5 6’s high integration and rich functions require only one inductor to reduce
voltage and boost functions, only a few peripheral components are needed during application, effectively reducing the overall
The size of the overall solution reduces the BOM cost.
IP
The 5356's synchronous switching boost system provides a maximum output power of 22.5W
force. When Boost is unloaded, it automatically enters sleep state.
IP53
5 6 synchronous switch charging system, supports 18 W charging, battery terminal
Charging current up to 50 A. Built-in IC temperature, battery temperature and input voltage control
Control loop and intelligently adjust charging current.
IP53
5 6 Built-in USB C & PD 3.0 protocol.
IP53
5 6 Built-in 14bit ADC and built-in current sampling circuit for accurate measurement
Battery voltage and current. IP53 5 6 Built-in power calculation method can accurately obtain power
Battery charge information. The battery capacity can be set to accurately display the battery power.
IP53
5 6 supports 1/2/4 LED power display, supports 88, 188, etc.
Various digital tube power display; supports lighting function; supports buttons.
IP5356
Supports I2C control interface.
Application products
　Mobile power supply, power bank
 Mobile phones, tablets and other portable devices