FEATURES
• Supply voltage for controller block: 5 V, supply voltage for output block: 12 V
• Low on-state resistance (total on-state resistance of upper and lower transistors) output RON = 1.1 Ω (TYP.)
• Low power consumption due to 3-phase full-wave PWM drive method
• On-chip hole bias switch (linked with STB pin)
• On-chip IND pulse switching function
• START/STOP pin included, acting as a brake during STOP
• Brake pin enabling reverse brake and short brake switching
• Standby pin included, turning off internal circuit in standby (Output high impedance)
• Low current consumption: IDD = 3 mA (Max.), IDD (ST) = 1 μA (Max.)
• On-chip thermal shutdown circuit
• On-chip undervoltage lockout circuit
• Overcurrent protector (can be externally set by external resistor)
• On-chip reverse revolution prevention circuit
• 30-pin plastic shrink SOP (7.62 mm (300))