The PD6710 and PD6722 are single-chip PC Card (PCMCIA) controller solutions capable of controlling one (PD6710) or two (PD6722) PC Card sockets. The chips are compliant with PC Card Standard, PCMCIA 2.1, and JEIDA 4.1 and are optimized for use in embedded applications and notebook/handheld/mobile computer systems where reduced form factor and low power consumption are critical design objectives. With the PD6710, a complete PC Card solution with power-control logic can occupy less than 1.5 square inches (excluding the socket connector). With the PD6722, a complete dual-socket PC Card solution with power-control logic can occupy less than 2 square inches (excluding socket connectors).

Product Features
• Single-chip PC Card (PCMCIA) controllers
• Direct connection to ISA (PC AT) bus and one or two PC Card sockets
• Compliant with PC Card Standard, PCMCIA 2.1, and JEIDA 4.1
• 82365SL-compatible register set, ExCA-compatible
• Automatic Low-Power Dynamic mode for lowest active power consumption
• Programmable Suspend mode
• Hardware-enabled Super Suspend mode
• Five programmable memory windows per socket and two programmable I/O windows per socket
• Programmable card access cycle timing
• 8- or 16-bit system bus interface
• 8- and 16-bit PC Card interface support
• PCMCIA-ATA and ture-IDE disk interface support
• DMA support (PD6722)
• Card-voltage sense support
• PC Card activity indicator
• Mixed-voltage operation (3.3/5.0 V)
• Single-socket interface: 144-pin LQFP for smallest form factor (PD6710)
• Dual-socket interface: 208-pin MQFP or LQFP (PD6722)