The terminal strip 820 with pitch 10 mm has a dual wire terminal connector on one
side. Here, the leads are inserted and clamped all the way to the stop. These
terminal strips are designed for solid conductors.
The opposite side is equipped with screw connections with rectangular clamping
spaces. The screws are ready to be wired, secured against self-loosening and
captive.
The wire protector of the “DS”-version reliably prevents damage to multi-wire
flexible conductors by the turning screw.
These terminals strips can be screw-mounted on a substrate.
Note: For the version without wire protector, flexible wires can only be connected
with a ferrule.