The TPD4206F is a DC brush less motor driver using high
voltage PWM control. It is fabricated by high voltage MOSFET
(500 V). It is three-shunt resistor circuit for current sensing. It
contains level shift high-side driver, low-side driver, MOSFET
outputs, and protective functions for over-current circuit and
shutdown function and under voltage protection circuits and
thermal shutdown circuit. It is easy to control a DC brush less
motor by just putting logic inputs from a MPU or motor controller
to the TPD4206F.

Features
• High voltage power side and low voltage signal side terminal
are separated.
• It is the best for current sensing in three shunt resistance.
• Bootstrap circuit gives simple high-side supply.
• Bootstrap diodes are built in.
• A dead time can be set as a minimum of 1.4 μs, and it is suitable for a Sine-wave drive.
• 3-phase bridge output using MOSFETs.
• Included over-current and under-voltage protection and shutdown, and thermal shutdown.
• The regulator of 7 V (typ.) is built in.
• The package is a surface mount type 30 pin package.