Description
The AEK-MOT-TK200G1 is designed as a zone controller for the power liftgate
application. The two main devices hosted are the L99DZ200G automotivegrade
multioutput driver and the SPC582B60E1 Chorus 1M automotive-grade
microcontroller.
The L99DZ200G device enables the board with two H-bridge gate drivers that control
an external MOS tuned for the power liftgate application actuations. Up to three DC
motors can be driven: two simultaneously (SPINDLE) and one by itself (CINCH).
The AEK-MOT-TK200G1 supports the current sensing for both H-bridges to impact
on the Hall sensor positioning and to detect obstacles encountered while opening/
closing the liftgate.
The AEK-MOT-TK200G1 firmware is preloaded. You can control the board through
an external domain controller via a CAN bus.
The AutoDevKit software library (STSW-AUTODEVKIT) includes a CAN bus-driving
example based on the SPC58EC Chorus 4M.

Features
• Hosts the automotive-grade L99DZ200G multioutput drivers and the
SPC582B60E1 Chorus 1M automotive microcontroller
• Controls up to three DC motors via the L99DZ200G H-bridge gate drivers
• Supports two additional high-side outputs to drive bulbs, relays, and LEDs
• Supports CAN bus interface for remote control
• Open-load and overcurrent detection
• Thermal warning and thermal shutdown protection
• Size 100 x 83 mm
• Included in the AutoDevKit ecosystem