The FDMF5062 is ON Semiconductor’s next generation Smart Power Stage (SPS) solution with fully optimized, ultra-compact,
integrated MOSFETs with advanced driver IC current and temperature sensors, for high-current, high frequency, and synchronous
buck DC-DC converters.
With an integrated approach, the SPS switching power stage is optimized for driver and MOSFET dynamic performance, system
parasitic reduction, and power MOSFET RDS(ON).
The integration of Power MOSFETs with a driver IC also enables high accuracy module-level thermal and current monitoring. The
FDMF5062 provides an output signal (IMON), which reports the real-time module current. The IMON signal can be used to replace
inductor DCR current sense or resistor sense methods. There is also accurate thermal monitoring (TMON) that provides a 0.8 V output
at 25°C with an 8 mV/°C slope.

Features
• Up to 70A Instantaneous Peak Current Handling Capability
• High-Performance, Universal Footprint, Copper-Clip 5 mm x 6 mm PQFN Package
• ON Semiconductor’s PowerTrench® MOSFETs for Clean Voltage Waveforms and Reduced Ringing
• 30 V / 25 V Breakdown Voltage MOSFETs for Higher Long-Term Reliability
• Optimized FET Pair for Highest Efficiency at 10% ~ 15 % Duty Cycle
• Optimized for Switching Frequencies up to 1 MHz
• Integrated Current Monitoring (IMON)
• Integrated Temperature Monitoring (TMON)
• Catastrophic Fault Detection Features
• Thermal Flag (OTP) for Over-Temperature Condition
For more features, see the data sheet

Applications
• CPU and Memory Voltage Regulators
• High-Current Multiphase Voltage Regulators
• Artificial Intelligence Add-On Cards
• Server CPUs, Storage, Telecom
• DC/DC Power Module